Manualios.com

Siemens SLI-5310 Operation & User’s Manual

Siemens SLI-5310 Manual Online:

3.75, 2802 votes
Siemens SLI-5310 User Manual
Siemens SLI-5310 User Guide
Siemens SLI-5310 Online Manual

Text of Siemens SLI-5310 User Guide:

  • Siemens SLI-5310, Chapter 2: System Requirement and Installation 7. On the IP Address tab: Enable Obtain an IP address automatically and click OK. 8. When returning to the Network window, click OK 9. Wait for Windows when copying files. 10. When prompted with System Settings Change dialog box, click Yes to restart your computer. 27

  • Chapter 2: System Requirement and Installation r Right click Askey ADSL Router USB Remote NDIS Device on the Network adapters list, and press Uninstall. s Click OK when the Confirm Uninstall window appears. Remember to unplug the USB cable before continue the uninstallation, or you will see the reminder as follows. Unplug and press OK. t When the Confirm Device Uni

  • Siemens SLI-5310, Chapter 4: Web Configuration Call Log This page shows the log information for the call. There are three items that you can choose for viewing details in the list below. They are Outgoing Calls, Incoming Calls and Missed Incoming Calls. To see either one of them, simple click the radio button of that item. Then, the corresponding information will be shown on the list below the selected item. 103

  • Siemens SLI-5310, Chapter 4: Web Configuration And when you want to restore the settings in the future, simply open Backup Config web page and use Browse button to locate the file. After opening the backup file, click Restore. Update Firmware If you have to or want to upgrade the firmware for this IAD, you can open the Update Firmware web page and choose the correct file by pressing Browse. Then click the Update Firmware button. The system will execute the update procedure automatically. Note that must not turn off the IAD during firmware updates. When it is finished, the system will tell you the update is successfully. Reset Router To m

  • Siemens SLI-5310, ADSL Router User Manual p When the welcome screen appears, click Next for the next step. q When the complete message of InstallShield Wizard appears, click Finish. r Link your IAD and the PC with a USB cable. s The system will detect the USB driver automatically. t Then the system will try to find the proper driver for your IAD and copy the files automatically. Note: If the USB device is not detected, check the USB cable between the PC and the device. Also make sure that the device is power on. 8

  • ADSL Router User Manual Appendix B: WEEE – B2C All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. The correct disposal and separate collection of your old appliance

  • Siemens SLI-5310, Chapter 2: System Requirement and Installation Setting up TCP/IP In order to access the Internet through the IAD, each host on your network must install/setup TCP/IP first. Please follow the steps below to set your network adapter. If the TCP/IP protocol has not been installed yet, please follow the steps below for installation. In the following illustrations, we will set the PC to get an IP address automatically at the same time. For Windows 98 1. Open the Start menu, point to Settings and click on Control

  • Chapter 2: System Requirement and Installation 2. On the Hardware tap, click Device Manager. 3. Confirm that the Siemens ADSL Router USB Remote NDIS Device is on the Network adapters list. For Windows XP n Run the USB installation program from the CD provided in your IAD package. o An InstallShield Wizard will appear. Please wait for a moment.

  • Siemens SLI-5310, Chapter 5: Troubleshooting Chapter 5: Troubleshooting If the suggested solutions in this section do not resolve your issue, contact your system administrator or Internet service provider. Problems with LAN PCs on the LAN cannot get IP addresses from the ADSL Router. The chances are that the interface used as DHCP server is modified and the client PCs do not renew IP addresses. If your DHCP server is enabled on Private IP Address previously and you modify the interface to Public IP Address, the client PCs should renew IP addres

  • Siemens SLI-5310, ADSL Router User Manual The information added will be shown on the window right away, as the right figure illustrates. That is, the specified address will be reserved and not be assigned by DHCP for other computer(s). You may click Add button to add another set or click Close to exit. Local Network – UPnP The UPnP is only available for Windows XP. If you are not a Windows XP user, you may ignore this page. Enabling the UPnP IGD and NAT traversal function allows the users to perform more applications behind NAT without additional configuration settings or ALG support on your router. You can enable the

  • Chapter 2: System Requirement and Installation u After the file copying finished, a completing message will appear. v You can use the IAD now. To make sure your IAD is properly installed, please do the following steps. 1. Right-click on My Computer and press Properties. 2. On the Hardware tab, click Device Manager.

  • Siemens SLI-5310, ADSL Router User Manual Firewall The firewall is a kind of software that interrupts the data between the Internet and your computer. It is the TCP/IP equivalent of a security gate at the entrance to your company. All data must pass through it, and the firewall (functions as a security guard) will allow only authorized data to be passed into the LAN. What the firewall can do? It can:  deny or permit any packet from passing through explicitly  distinguish between various interfaces and match on the following fields:  source

  • Siemens SLI-5310, Chapter 2: System Requirement and Installation Note: If you cannot release the IP address successfully and see the message “The requested operation requires elevation,” please go to the Start menu and right click Command Prompt, then set Run as administrator. Press Continue when a dialog asking for permission to continue prompts. After then, repeat the above instruction to release and renew the IP address. 45

  • Siemens SLI-5310, Chapter 3: Accessing the Internet Unnumbered IP over ATM (IPoA)+NAT Description: If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the IAD and public server, e.g., Web or FTP server. Typically the first IP is network address, the second is used as the IAD IP address and the last one is subnet broadcasting. Other remaining IP addresses can be assigned to PCs on the LAN. The following example uses the IP address ranging from 10.3.80.81 to 10.3.80.86 and the subnet

  • Siemens SLI-5310, Chapter 3: Accessing the Internet Numbered IP over ATM (IPoA) Default Private IP 192.168.1.1 10.3.80.83 ( Internet Service Provider ) ISP DSLAM Loop IAD 10.3.95.233 10.3.80.81 STM-1 S/W Hub BRAS RDAIUS Server AAA IP over ATM 10.3.80.82 PC(S) *BRAS: Broadband Remote Access Serve r Public IP Pre-assigned by ISP Description: If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the IAD and public server, e.g., Web or FTP server. Typically the first I

  • Siemens SLI-5310, ADSL Router User Manual ³ The boot loader contains very simple web page to allow the users to update the run-time firmware image. ³ Configuration file backup and restore ³ SNMPv1/v2 agent with MIB-II, ADSL Line MIB Subscription for ADSL Service To use the IAD, you have to subscribe for ADSL service from your broadband service provider. According to the service type you subscribe, you will get various IP addresses: Dynamic IP: If you apply for dial-up connection, you will be given a

  • ADSL Router User Manual Connecting the IAD Follow the steps below to connect the related devices. n Connecting the ADSL line: connect the DSL port of the device to your ADSL wall outlet with RJ-11 cable. o Please attach one end of the Ethernet cable with RJ-45 connector to the LAN port

  • Siemens SLI-5310, ADSL Router User Manual MER RDAIUS Server AAA BRAS STM-1 DSLAM Public IP assigned by BRAS Hub ME R *BRAS: Broadband 192.168.1.1 Loop IAD PC Ethernet ( Internet Service Provider ) ISP Default Private IP Remote Access Serve r Description: In this deployment environment, we make up a private IP network of 192.168.1.1. NAT function is enabled to support multiple clients to access to Internet. In this example, the IAD acts as a NAT device which translates a private IP address into a public address. Therefore multiple users can share with one public IP address to access the Internet through this IA

  • Siemens SLI-5310, Chapter 4: Web Configuration Local Network – DHCP Server This allows you to set DHCP server on LAN interface. DHCP Server On: Check this item if DHCP service is needed on the LAN. The IAD will assign IP address and gateway address for each of your PCs. You have to key in Start IP Address, End IP Address, and Lease Time. The default lease time is 1day. Relay On: Click this button to have a relay setting. And type the Server IP in the IP field. When the DHCP server is served by another device rather than the IAD itself, you can relay to that specific server and enter the IP add

  • Siemens SLI-5310, Chapter 4: Web Configuration used. SIP Transport Port: Key in the port number for the SIP proxy server provided by your ISP. The default port here is 5060. SIP Registrar Address: Enter the IP address or Domain name for the SIP Registrar Address. SIP Registrar Port: Key in the port number for the SIP Registrar server provide by your ISP. The default is 5060. Registrar: It is a server that accepts REGISTER requests and places the information it receives in those requests into the location service for the domain it handles. SIP Outbound Proxy: Type the IP address or Domain Name of the SIP proxy server into the field. SIP Outbound Proxy Port: Key in t

  • Siemens SLI-5310, Chapter 4: Web Configuration Voice over IP VoIP (Voice over IP) is a voice service provided by the ISP. It compresses the voice signal into data package and transfers the data through the IP network. That is, it is a telecommunications service of sounds by the open Internet. With the Internet, it not only offers real-time sound service, but also it can connect to anywhere in the world. It allows users to carry out remote conversation without passing PSTN. VoIP provides you with a new way to gain more from your broadband connection - simply hook up your phone to the telephone adapter and create a service similar to an additional phone line. Wh

  • Siemens SLI-5310, ADSL Router User Manual IP addresses can be automatically redirected to local servers configured with private IP addresses. In other words, depending on the requested service (TCP/UDP port number), the router redirects the external service request to the appropriate server (located at another internal IP address). Add New Port Forwarding To set a virtual server, please open the Virtual Server item from the Advanced setup menu. To add a new Port Forwarding, please click Add from the Port Forward

  • Siemens SLI-5310, Chapter 2: System Requirement and Installation Method Two: n To safely unplug the USB cable from the USB port on your PC: 1. Go to the right lower corner for Unplug and Eject Hardware and left click on it. 2. Click the dialog for Stop Siemens ADSL Router USB Remote NDIS Device. 3. The Router is safely removed, click OK to continue. o Choose Settings –Control Panel from the Start menu. Choose Add/Remove Programs. p A dialog appears to ask you to choose the program that you want to remove. Please select Siemens ADSL Router USB Driver an

  • Siemens SLI-5310, ADSL Router User Manual 7. When it returns to the General Tab on the Local Area Connection Properties window, highlight Internet Protocol (TCP/IP) and then click Properties. 8. Under the General tab, select Obtain an IP address automatically, and Obtain DNS server address automatically. Then click Ok. 38

  • Siemens SLI-5310, Chapter 3: Accessing the Internet Numbered IP over ATM (IPoA)+NAT Description: In this deployment environment, we make up a private IP network of 192.168.1.1. NAT function is enabled (on the IAD or use another NAT box connected to hub) to support multiple clients to access the IAD and some public servers (WWW, FTP). If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the IAD and public server, e.g., Web or FTP server. Typically the first IP is network address, the second is used as IAD IP address and the last one is subnet broadcasting. Other remaining IP addresses can be assigned to PCs on the LAN. The fol

  • Siemens SLI-5310, ADSL Router User Manual SIP Extension More advanced functions are provided here, these are optional settings. Please check what you need for the IAD settings. Encode SIP option with the User Agent: It means the device name will be conveyed with the packets transmitted to other places. The SIP request and response messages sent by the IAD will be encoded with the device name of the user agent. Encode SIP URI with user=phone parameter: A SIP URI can identify a communicat

Related Products and Documents (Network Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Extreme Networks Altitude 3510 Installation manual extreme-networks/altitude-3510-OO7.pdf 21 Apr 2023 46 1.36 Mb
2 Lucent Technologies Definity 6408 Operation & user’s manual lucent-technologies/definity-6408-3E5.pdf 16 Dec 2023 32
3 Euro-Pro 8260 Instruction manual euro-pro/8260-REV.pdf 28 Sep 2022 70 0.77 Mb
4 Ask Proxima Impression 960 Operation & user’s manual ask-proxima/impression-960-XF5.pdf 24 Oct 2022 41 0.36 Mb
5 ViewSonic VS13784 Operation & user’s manual viewsonic/vs13784-4SJ.pdf 13 Jul 2022 26 3.76 Mb
6 AT&T EL51100 Operation & user’s manual at-t/el51100-6T1.pdf 01 Sep 2023 67 9.38 Mb

Similar Resources:

  • NETGEAR

    Nighthawk XR700

    (2 pages)
    Quick StartNighthawkGaming RouterModel XR700RouterPower adapter (varies by region)Ethernet cablePackage ContentsYour router comes with the following pro gaming and Nighthawk features. For more information, visit www.netgear.com/XR700.Pro Gaming and Nighthawk FeaturesGaming dashboard. Get an overview of your router settings.Geo-lter. Reduce lag by setting …
  • Allied Telesis

    AT-8000S/24

    (3 pages)
    Allied Telesis www.alliedtelesis.comDatasheet | SwitchesAT-8000S/24Layer 2 Stackable Fast Ethernet Switch AT-8000S/2424 port stackable 10/100TX Layer 2 switch with 2 active SFP bays (unpopulated) and 2 standby 10/100/1000T ports (RJ-45)OverviewOne of a series of stackable switches fromAllied Telesis, the AT-8000S/24 provides highperformance Layer 2 switching …
  • Pepwave

    Peplink MAX Series

    (404 pages)
    Copyright & Trademarks Specifications are subject to change without notice. Copyright © 2021 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners. MAX Series User Manual Pepwave Products: MAX 700 / HD2 …
  • ZyXEL Communications

    G-4100

    (93 pages)
    G-4100 v2802.11g Wireless Hotspot GatewayQuick Start GuideVersion 1.00 7/2006 Edition 1Copyright © 2006 ZyXEL Communications Corporation. All rights reserved.ENGLISH 2DEUTSCH 13ESPAÑOL 25FRANÇAIS 37ITALIANO 48РУССКИЙ 59SVENSKA 71繁體中文 83 …
  • peplink

    MAX HD2 Dome

    (8 pages)
    How to Setup HD2 Dome With Local SIM Injector Published: January 23rd, 2019 Together, the HD2 Dome and SIM Injector enable deployments where the router can be strategically placed for the best signal (such as a rooftop of the mast of a ship). At the same time, the SIM cards can be conveniently located in the office, passenger area, or bridge for easy chan …
  • Transition Networks

    SISPM1040-3166-L

    (2 pages)
    SISPM1040-3xxx-L Quick Start Guide 33761 Rev. C https://www.transition.com Page 1 of 2 SISPM1040-3xxx-L Quick Start Guide The SISPM1040-3248-L is a managed Hardened PoE+ Switch provides (24) 10/100/1000 PoE+ ports, 4 100/1000 dual speeds SFP ports with additi …

Comments, Questions and Opinions: