Manualios.com

LG MultiVision SPM42C4-WP Owner's Manual

LG MultiVision SPM42C4-WP Manual Online:

3.45, 1857 votes
LG MultiVision SPM42C4-WP User Manual
LG MultiVision SPM42C4-WP User Guide
LG MultiVision SPM42C4-WP Online Manual

Text of LG MultiVision SPM42C4-WP User Guide:

  • LG MultiVision SPM42C4-WP, 2 Accessories MultiVision Mounting Bracket-Landscape SPM42C4-WL MultiVision Mounting Bracket-Portrait SPM42C4-WP MultiVision Mounting Bracket 4 Guide Spacer 4 Guide Spacer Fixing Screws (M6X35mm) 4 Bracket Fixing Screws (M6X80mm) 4 Nuts Owner's Manual Wrench 4 Supporter Connection Fixing Screws (M4X8mm) Supporter Connection (SPM42C4-WL Only)

  • 3 ENGLISH After reading the manual, please keep it handy for future reference. - If you are a professional installer, please read this manual carefully before installing the product. - After installing the product according to the manual, ensure that the user also reads the manual carefully. Safety Precautions Warning The product should be installed by a qualified professi

  • LG MultiVision SPM42C4-WP, 4 When moving or lifting the monitor, read the following to prevent the monitor from being scratched or damaged and for safe transportation regardless of its type and size.  It is recommended to move the monitor in the box or packing Cover that the monitor originally came in.  Before moving or lifting the monitor, disconnect the power cord and all cables.  Hold the top and bottom of the monitor frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.  Avoid touching the screen at all times, as this may result in damage on the screen.

  • LG MultiVision SPM42C4-WP, 5 ENGLISH <Correct method> Panel Cushion If the product needs to be set upright, hold both sides of the product, and tilt back- ward carefully for the panel not to touch the floor. (The setting upright of the set is possible with the outer frame) When laying down the prod- uct, lay a cushion on a flat floor, and put the product on it with the panel of the prod- uct facing down. <Incorrect method> Panel Panel If the product is tilted to the side of the panel, the bottom of the panel may be dam- aged. If the product is tilted to the edge of the panel, the edge of the panel may be dam- aged.  Handle the product with care. The product may be damaged by shocks. NO

  • LG MultiVision SPM42C4-WP, 6 How to Install - Attach the brackets using two bracket fixing screws (M6 Assembling the MultiVision Bracket 1 Nut Before Installation * Do not use this product for purposes other than to attach the monitor to the wall. * Be careful when installing and using the bracket to prevent product damage and safety hazards. * If the instructions in the manual are unclear, stop the installation and contact the service center. If you are still having problems understanding the instructions after contacting the center, seek a professional to install the product. * An individual with experience i

  • LG MultiVision SPM42C4-WP, 7 ENGLISH r - Join the brackets each other as shown below using the connect supporters and screws. - When the brackets are attached, unscrew the locking bolts A and B to adjust the sets vertically and horizontally before mounting them. A Locking bolt for vertical adjustment Locking bolt for horizontal adjustment B

  • LG MultiVision SPM42C4-WP, 8 MultiVision Wall Bracket-Landscape SPM42C4-WL MultiVision Wall Bracket-Portrait SPM42C4-WP Refer to the following illustration to fix the brackets according to the type. 2 Verifying Where the Brackets Are Fixed A bolt The bracket may be distorted, depending on the flatness of the wall. Adjust the flatness of the bracket using the A bolts attached to it. Use a bolt that is capable of holding the weight of the product. We recommend using an bolt & Nut.) 3 Attaching the Guide Spacers If the screws are not fully tightened when you attach the guide spacers, check the length of the screws and refer to the technical service manual. <How to at

  • LG MultiVision SPM42C4-WP, 9 ENGLISH l 5 6 How to Attach the Product and Bracket Connecting Cables - Two or more people are needed to install the product. - It is recommended to arrange cables using the bracket firat to install the set. - For information on how to connect cables, please refer to the set's owner's manual. Place the product assembled with the guide spacers, as illustrated with the arrow. - Make sure that the product is fixed securely by checking attachement. 4 Dip switch setting OFF ON 1 234 1 234 1234 1234 1234 1234 monitor #3 1234 1234 monitor #4 1234 1234 monitor

  • LG MultiVision SPM42C4-WP, 10 7 Set Arrangement The procedure is based on 3X3 installation. Set Arrangement step : 8 → 5 → 2, 7 → 4 → 1, 9 → 6 → 3 1. Mount set 8 to the wall mounting bracket as shown below and adjust it vertically and horizontally before fastening A locking bolts. * Adjust set 8 vertically within 10 mm. * This is a bracket with gas spring, so sets can be adjusted vertically with a small force. 8 1 4 7 2 5 8 3 6 9 A * Under 10mm

  • 11 ENGLISH A 2. Mount set 5, then remove the module-protecting Cover on sets 8 and 5. Insert 4 Guide pins as shown in the fi gure below. 3. Slowly push down set 5 and insert the guide pins into set 5 as shown below. * This is a bracket with gas spring, so sets can be adjusted vertically with a small force. Remove the module-protecting Cover. (The protective Cover i

  • LG MultiVision SPM42C4-WP, 12 - Mount set 2 in the same way as set 5 is mounted. 4. Fix the top set (i.e., set 2 shown below) with the locking bolts so that it does not move vertically. Remove the module-protecting Cover. (The protective Cover is attached on all four sides; only remove fi rst the Cover on the sides where the sets meet.) 2 5 8 9 * 2 5 8 5. Adjust the gap (seam) between sets 8 and 9 by moving set 9 vertically and horizontally. After this, fi x set 9 with the locking bolts so that it does not move vertically. 5 8 9 A A

  • LG MultiVision SPM42C4-WP, 13 ENGLISH 6. After adjusting the gap (seam) as explained above, fi nish the assembly by sliding the left and right three sets as shown below. * To minimize the gap between the joined sets, tighten the left and right sliding locking screws at the bottom of the wall mounting brackets. 1 4 7 2 5 8 3 6 9

  • LG MultiVision SPM42C4-WP, 14 How to Service 1 4 7 3 6 9 8 2 5 1. Slide sets 3, 6, 9 to the right and sets 1, 4, 7 to the left. Make sure that the left and right sliding fi xing locks are released. 2. Move sets 2 and 5 to the position B as shown below. Move set 8 to the position A and pull it out. CAUTION  Make sure that sets 2 and 5 are not pulled out at the position A when moving them to the service position. 3. Mount back set 8 replaced for service and adjust the sets in reverse order. A B

  • LG MultiVision SPM42C4-WP, 15 ENGLISH Product Specifications Model Name SPM42C4-WP Width (mm) 1426 1426 Height (mm) 210 210 Depth (mm) 1006 1006 Weight (kg) Gross 18 17 Net 1111 106 185 79 100 1325.5 749 650 600 400 185 79 100 106 1325.5 749 400 600 650 . SPM42C4-WL

Related Products and Documents (TV Mount):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Panasonic SC-HC25DB Operating instructions panasonic/sc-hc25db-1VT.pdf 16 Jul 2023 2 0.52 Mb
2 Xerox Phaser 540 Operation & user’s manual xerox/phaser-540-62W.pdf 11 Jun 2023 79 0.42 Mb
3 Blaupunkt ACAPULCO Acapulco CD51 Operating instructions manual blaupunkt/acapulco-acapulco-cd51-23F.pdf 06 Jul 2022 30 0.34 Mb
4 REVELL 2006 Dodge Magnum SRT8 Assembly manual revell/2006-dodge-magnum-srt8-KGT.pdf 03 Jul 2022 8 2.4 Mb
5 Honda EG2500X Owner's manual honda/eg2500x-G96.pdf 30 Jul 2023 55 1.5 Mb
6 Avalon Arbor Owner's manual avalon/arbor-3LK.pdf 06 Sep 2023 38 12.47 Mb

Similar Resources:

  • DMP Electronics

    PLB170S-SW

    (5 pages)
    EnglishInstallation InstructionUNPACKING INSTRUCTIONS! Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.! Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged. Do not use damaged or defecti …
  • Axis

    F8203

    (10 pages)
    INSTALLATION GUIDE AXIS F8203 Fixed Mounting Bracket Available from A1 Security Cameras www.a1securitycameras.com email: [email protected]
  • Sony

    BRAVIA KDL-46EX650

    (180 pages)
    i-Manual Print Font Size Basic OperationsParts DescriptionWatching TVUsing Other DevicesUsing “BRAVIA” SyncDevicesUseful FunctionsUsing InternetUsing Home Network(DLNA)Configuring VariousSettingsTroubleshootingHow to Use BookmarksTop PageKDL-46EX650/40EX650/32EX650KDL-46EX651/40EX651/32EX651KDL-32EX550Trademark Information List of Contents© 2012 So …
  • Sanus

    HMT1

    (20 pages)
    Para Español ver página 14HMT1INSTRUCTION MANUALRecommended placementOur US-based install experts are standing by to help.Call us at:888-384-1115Or, chat at:SANUS.com/chatSHGet it right the first time. HeightFinder™shows you where to drill.Check it out at:SANUS.com/2933Want to watch a video that shows how easy this DIY project will be?Watch it now at:SA …
  • Tripp Lite

    B020-016-17

    (3 pages)
    Tripp Lite1111 West 35th StreetChicago, IL 60609 USATelephone: +(773) 869 1234E-mail: [email protected] Number: B020-016-17Console KVM Switch - 16-Port NetDirector 1U Rackmount Console KVM Switch w/17" LCD HighlightsControl an entire network in just 1U rack spaceCombines a 16 port KVM switch, 17" LCD screen, keyboard, and touchpad ina 1 …
  • Quantum

    QF72

    (2 pages)
    QUANTUM QFLASH MULTI BRACKET QF72/73INSTRUCTIONSThe Multi Bracket is used to mount Qflash in the center of an umbrella, to mount Qflash in a light box, and tomount a Radio Slave with Qflash either as a remote stationary flash or roving flash.Supplied with QF72TiltingUmbrellaClamp"L" BracketSupplied with QF73 - user already has an umbrella clamp, or …

Comments, Questions and Opinions: