Manualios.com

Asus Network Device CRW-3212A Manual 

Asus Network Device CRW-3212A Manual Online:

3.85, 1704 votes
Asus Network Device CRW-3212A User Manual
Asus Network Device CRW-3212A User Guide
Asus Network Device CRW-3212A Online Manual

Text of Asus Network Device CRW-3212A User Guide:

  • Asus Network Device CRW-3212A, ASUS CRW-3212A User’s Manual 9 Welcome! Thank you for buying the ASUS CRW-3212A Drive! To ensure proper installation and use of this device, read the instructions and other important information contained in this manual. Product Introduction Specifications The CRW-3212A has the following specifications. • Speeds 32X, 24X, 16X, 12X, 8X, 4X writes 12X, 10X, 8X, 4X, 2X rewrites 16X~40X reads • Interface ATAPI specification • Technology support FlextraSpeed™ Technology FlextraLink™ Technology Double Dynamic Suspension System II (DDSS II) Zone CLV Recording Technology • Data buffer size 2MB • Application discs 12cm or 8cm diamete

  • Asus Network Device CRW-3212A, 10 ASUS CRW-3212A User’s Manual Features The ASUS CRW-3212A is a CD-RW drive with 32X-write, 12X-rewrite, and 40X-read capabilities. The drive complies with the AT Attachment Packet Interface (ATAPI) specification and comes equipped with the latest innovative technologies in CD recording. Highlighting the major characteristic of ASUS CD-RW drives, the CRW-3212A strategically identifies the media quality at the beginning of the recording so that it can apply the appropriate writing speeds and ensure effective data storage. Thanks to the FlextraSpeed™ and FlextraLink™ technologies developed by ASUS. FlextraSpeed™ increases accurac

  • Asus Network Device CRW-3212A, ASUS CRW-3212A User’s Manual 11 Data transfer slows down Buffer Memory Write process continues Write Data Data Data transfer slower than write process Bad disc results Data Buffer Memory Empty Data transfer continues and fills buffer with sufficient data for writing Buffer Memory Write process continues until writing is complete Data Write Data Write Data Buffer Memory Data Data transfer slows down Buffer Memory Write process stops; waits until there is enough data for writing Data Write Data Recording with FlextraLink™ Technology Conventional Recording FlextraLink™ Technology Solution FlextraLink™ Technology The ASUS FlextraLink™

  • Asus Network Device CRW-3212A, 12 ASUS CRW-3212A User’s Manual DDSS / DDSS II Design Structure Double Dynamic Suspension System (DDSS II) The DDSS II is an enhanced follow up to the DDSS anti-vibration system developed by ASUS. The DDSS CD-ROM technology is designed to reduce the vibration generated from spindle rotation of over 8900 rpm of 40X CD-ROM drives. The DDSS II improves this feature by handling up to over 10,000 rpm of the new 50X drives. In addition, the DDSS II stabilizes the pick-up head of the drive in both horizontal and vertical directions, making tracking and focusing even more precise. Like the

  • ASUS CRW-3212A User’s Manual 13 Zone CLV Recording Technology The Zone Constant Linear Velocity (CLV) recording method allows you to achieve a higher recording speed by using a different speed for each of the four zones partitioned from the inner to the outer area in a disc. When using the Zone CLV, the recording in Zone 1 is 16X speed, then increases to 20X sp

  • Asus Network Device CRW-3212A, 14 ASUS CRW-3212A User’s Manual Front Panel 1. Headphone jack This jack allows you to connect a headphone with a stereo mini-plug. 2. Headphone volume dial This volume dial allows you to control the volume of the headphone connected to the drive. Turning the dial to the left decreases the volume, turning to the right increases volume. 3. Disc tray This tray holds the disc. 4. WRITE indicator (Red LED) This LED flashes while data is being written on the disc. 5. READ indicator (Green LED) This LED turns ON when you place a disc on the drive tray, and st

  • ASUS CRW-3212A User’s Manual 15 Rear Panel 1. Digital audio connector This connector is for a digital signal output cable. 2. Analog audio connector This connector is for an analog signal output cable. 3. Jumper terminals These pins allow you to select either Master, Slave, or Cable Select mode for the CD-ROM device. 4. IDE connector This connector is for a 40-pin I

  • Asus Network Device CRW-3212A, 16 ASUS CRW-3212A User’s Manual Installation System Requirements Before installing and using the CD-RW drive, make sure that your computer system meets the following requirements. • IBM-compatible Pentium 166MHz or higher PC • Windows 98/98SE/ME/2000/XP/NT 4.0, Linux, or OS/2 Warp operating system • At least 64MB system memory (128MB is recommended) • An empty 5.25-inch external drive bay • HDD empty storage capacity of 100MB or more Average seek time: 20ms or less Transmission rate: 2 MB/s or more NOTE: Do not use a hard disk that calibrates thermally during operation. • Recommended media: CD-R Sony, TDK, Ricoh, Kodak, Mitsubishi Chemical, Taiyo Yuden, Yamaha, Phi

  • Asus Network Device CRW-3212A, ASUS CRW-3212A User’s Manual 17 Setting the Jumper Terminals Configure the the jumpers to set the device to master or slave mode before physically installing it to your computer chassis. Use jumper blocks to short the pins to your desired setting. CAUTION: Make sure to correctly place the jumper blocks over the pins. Failure to do so may cause irreparable damage to the drive! Master Mode Cover the two pins labeled MASTER to set the CD-RW drive as a secondary master drive. This is possible only if your computer supports four IDE devices. The hard disk in the computer is set as Primary Master. Slave Mode Cover the two pins labeled SLA

  • Asus Network Device CRW-3212A, 18 ASUS CRW-3212A User’s Manual Installing the CD-RW Drive Follow these steps to install the drive into the computer chassis. NOTE: Refer to your computer manual for specific instructions on opening the chassis and installing drives. 1. Remove the cover of an empty 5.25-inch external drive bay. 2. Carefully insert the CD-RW drive into the bay and push it inward until it is flushed to the chassis front panel. The holes on the sides of the drive should align with the holes on the drive bay.

  • Asus Network Device CRW-3212A, ASUS CRW-3212A User’s Manual 19 3. Secure the drive with screws that came with the drive package. Use two screws on each side of the drive. IMPORTANT: Depending on the space on your chassis, you may need to connect the drive cables before securing the drive into the chassis. For cable connections, proceed to the following section, “Connecting the Drive Cables.”

  • Asus Network Device CRW-3212A, 20 ASUS CRW-3212A User’s Manual Connecting the Drive Cables 1. Connect the power cable plug to the power connector on the rear panel. 2. Connect the 40-pin IDE cable plug to the IDE connector, matching the red pin stripe on the cable with Pin 1 on the connector. 3. If your computer has a sound card or an onboard audio feature, connect an audio interface cable to the 4-pin analog audio connector on the rear of the drive. Connect the other end of the audio cable to the connector on the sound card or on the 4

  • Asus Network Device CRW-3212A, ASUS CRW-3212A User’s Manual 21 Installing the Device Driver Before you can use your CRW-3212A drive, you must first install the device driver. IMPORTANT! Make sure you that you have completed the drive installation and have replaced the computer cover before you proceed. Follow these steps to install the device driver. 1. Turn on the computer. 2. Your operating system (OS) detects the new hardware (CD-RW drive) that you installed and automatically looks for the appropriate driver. 3. Follow the screen instructions to install the driver. Installing the CD-RW Software The ASUS CRW-3212A drive suppo

  • 22 ASUS CRW-3212A User’s Manual CD-RW Drive Basics Placing a Disc into the Drive 1. Press the eject button on the front of the drive to eject the tray. 2. When the drive tray ejects out of the drive, place the disc on the tray with the label (printed) side up.

  • Asus Network Device CRW-3212A, ASUS CRW-3212A User’s Manual 23 3. Press the drive eject button or lightly push the center of the drive tray to replace the tray inside the drive. Ejecting a Disc from the Drive 1. Press the eject button on the front of the drive to eject the tray. 2. Carefully remove the disc from the tray. 3. Press the drive eject button or lightly push the center of the drive tray to load the tray back into the drive. 12-cm Disc 8-cm Disc NOTE: If you are using a 12-cm disc, place it on the tray making sure that it fits the outer cir

  • 24 ASUS CRW-3212A User’s Manual Using the Emergency Eject Pinhole The emergency eject pinhole on the front of the drive allows you to manually eject the drive tray and remove a disc from the drive in the following instances: • supply of power to the computer is cut due to electrical power outage • the drive malfunctions 2. Carefully pull the tray out and remove the CD.

  • Asus Network Device CRW-3212A, ASUS CRW-3212A User’s Manual 25 Using Compact Discs Take note of the instructions in this section when using compact discs. These instructions will help you avoid damaging the discs and your CD-RW drive. Cleaning a Disc Spray the disc with compressed air for about five seconds to get rid of the dust on a disc. Handling a Disc Hold a disc by the edges. Do not touch the disc surface.

  • Asus Network Device CRW-3212A, 26 ASUS CRW-3212A User’s Manual Technical Information Environmental Specifications Temperature Operation: 5°C < to < 45°C Storage: - 20°C to < 60°C Humidity Operation: 20% to 80% non-condensing Storage: 15% to 85% non-condensing Vibration Operation: 0.3G peak at 5 ~ 500 Hz Storage: 2.0G peak at 10 ~ 500 Hz Impact Non-operation: 1 oct/min – no damage Less than 50G – (at 11ms/half sine wave, 3 shock/each side) Packaged: 1 oct/min – no damage 91 cm high – (1 corner, 3 edges, 6 surfaces) Acoustic Access mode: 41.5 dB TYP Read mode: 44.5 dB TYP (Microphone located 50cm in front

Related Products and Documents (Network Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 IBM Infoprint 1130 Operation & user’s manual ibm/infoprint-1130-FGP.pdf 16 Aug 2022 706
2 Sinbo SJ 3122 Instruction manual sinbo/sj-3122-PZJ.pdf 10 Feb 2023 8
3 Sony KV-25M2A Service manual sony/kv-25m2a-YYW.pdf 02 Nov 2023 42 4.23 Mb
4 VeriFone omni 5 series Installation manual verifone/omni-5-series-S4O.pdf 28 Feb 2024 43
5 Fronius IG 15 Operating instructions manual fronius/ig-15-Y94.pdf 09 Nov 2023 92
6 MacAllister MCSP40 Get started macallister/mcsp40-11J.pdf 01 Aug 2023 62

Similar Resources:

  • Linksys

    Instant Broadband Series

    (2 pages)
    2• One Instant WirelessTMNetwork PC Card ver. 3.0• One Setup Utility CD-R OM (User Guide on CD)• Quick Installation insert and R egistration Card (not shown)• A 16-bit PCMCIA T ype II or T ype III slot• PCMCIA revisions 2.10 compliant card and socket services• Windows 95, 98, Millennium, NT , 2000, or X P • 600 K bytes of free disk space for u …
  • Panasonic

    MAZ9xxxH Series

    (3 pages)
    Zener Diodes1Publication date: November 2005 SKE00008DEDMAZ9xxxH SeriesSilicon planar typeFor surge absorption circuit■ Features•Two elements anode-common type•Power dissipation PD : 200 mW■ Absolute Maximum Ratings Ta = 25°CUnit: mmParameter Symbol Rating UnitPower dissipation *PD200 mWJunction temperature Tj150 °CStorage temperature Tstg−55 to …
  • Belkin

    N1 Wireless Router

    (2 pages)
    WIRELESS MODEM ROUTERQuick Installation GuideNeed help?See the extended user manual on the CD-rom or go to:UK http://www.belkin.com/uk/support/© 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.F5D8632uk4ANetwork Status DisplayInternet ADSL Router Wired Wireless Security Your …
  • Sel

    SEL-751A

    (4 pages)
    SEL-751A Option CardsRefer to the Model Option Table on the SEL website for ordering details.Card TypeCard Slot OptionsC D ESELECT EIA-232/485 XSELECT DeviceNet XSELECT 3 DI/4 DO/1 AO (one card per relay only) X X XSELECT 4 DI/4 DOaX X XSELECT 4 DI/3 DO (one Form B and two Form C outputs)bXXXSELECT 8 DI X X XSELECT 4 AI/4 AO (one card per relay only) X X XSE …
  • DAVIS

    Vantage Pro ISS Retrofit Kit

    (24 pages)
    Product # 6921, 6921CVANTAGE PRO® AND VANTAGE PRO PLUS™Fan-Aspirated ISS Retrofit KitInstallation Instructions Estimated Time Required: 60 MinutesThese instructions describe how to install the Vantage Pro® Fan-Aspirated Integrated Sensor Suite (ISS) Retrofit Kit.This retrofit kit applies to all cabled and wireless versions of the fan-aspirated ISS.Compon …
  • Omnitron Systems Technology

    iConverter Gx AN

    (2 pages)
    iConverter Gx AN Standalone Module QUICK START GUIDEThe iConverter® Gx AN Standalone media converter provides 1000BASE-T copper to 1000BASE-X ber media conversion. The Gx AN can be used to connect Gigabit le servers to Gigabit switches and connect switches with Gigabit ber uplinks.The Gx AN supports auto-negotiation with congurable Full/Hal …

Comments, Questions and Opinions: