Manualios.com

Asus RT-N10 B1 (RT-N10+ B1) Operation & User’s Manual

  • RT-N10 B1 (RT-N10+ B1) Network Router
  • maEReTt1WnGY.
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 53

Asus RT-N10 B1 (RT-N10+ B1) Manual Online:

3.15, 2875 votes
Asus RT-N10 B1 (RT-N10+ B1) User Manual
Asus RT-N10 B1 (RT-N10+ B1) User Guide
Asus RT-N10 B1 (RT-N10+ B1) Online Manual

Text of Asus RT-N10 B1 (RT-N10+ B1) User Guide:

  • Asus RT-N10 B1 (RT-N10+ B1), 18 RT-N10+ Chapter 3: Conguring the clients 3 Conguring the network clients Accessing the wireless router Setting an IP address for wired or wireless clients To access the ASUS Wireless Router, you must have the correct TCP/IP settings on your wired or wireless clients. Ensure that the clients’ IP addresses are within the same subnet as the ASUS Wireless Router. By default, the ASUS Wireless Router integrates the DHCP server function, which automatically assigns IP addresses to the clients in your network. But in some instances, you may want to manually assign static IP addresses on some of the clients or computers

  • Asus RT-N10 B1 (RT-N10+ B1), 52 RT-N10+ Appendices ASUS Contact Information ASUSTeK COMPUTER INC. (Asia Pacic) Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 Website www.asus.com.tw Technical Support Telephone +886228943447 Support Fax +886228907698 Online support support.asus.com ASUS COMPUTER INTERNATIONAL (America) Address 800 Corporate Way, Fremont, CA 94539, USA Telephone +15029550883 Fax +15029338713 Website usa.asus.com Online support support.asus.com ASUS CO

  • Asus RT-N10 B1 (RT-N10+ B1), 16 RT-N10+ Chapter 2: Setting up the hardware Setting up the wireless router in AP mode In the AP mode, the wireless router receives the WAN IP address from the router connected to the WAN port and provides you with wireless radio signals. The NAT, rewall, and IP sharing services are disabled. To set up the wireless router in AP mode: 1. Connect your devices. RT-N10+ Client Modem Router Note: We recommend that you use an Ethernet cable (wired connection) to connect your computer to the wireless router for initial conguration to avoid possible setup problems due to

  • 12 RT-N10+ Chapter 2: Setting up the hardware 2. Launch your web browser and the QIS web page appears automatically. Select IP Sharing mode, then click Next. Note: If the QIS web page does not appear after you launched your web browser, disable the proxy settings on your web browser. Setting up the wireless router in Router mode In the Router mode, the wireless

  • Asus RT-N10 B1 (RT-N10+ B1), 6 RT-N10+ Chapter 1: Knowing your wireless router 1 Knowing your wireless router Package contents Check the following items in your ASUS Wireless Router package. RT-N10+ Wireless Router x1 Power adapter x1 Support CD (manual, utilities) x1 RJ45 cable x1 Quick Start Guide x1 Note: If any of the items is damaged or missing, contact your retailer. System requirements Before installing the ASUS Wireless Router, ensure that your system/network meets the following requirements: • An Ethernet RJ

  • Asus RT-N10 B1 (RT-N10+ B1), 46 RT-N10+ Appendices Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software,

  • Asus RT-N10 B1 (RT-N10+ B1), 19 Chapter 3: Conguring the clients RT-N10+ Windows ® 2000 1. Click Start > Control Panel > Network and Dial-up Connection. Right-click Local Area Connection then click Properties. 2. Select Internet Protocol (TCP/IP), then click Properties. 3. Select Obtain an IP address automatically if you want the IP settings to be assigned automatically. Otherwise, select Use the following IP address: and key in IP address, Subnet mask, and Default gateway. 4. Select Obtain DNS server address automatically if you want the DNS server settings to be assigned automatically. Otherwise, select Use the following DNS se

  • Asus RT-N10 B1 (RT-N10+ B1), 20 RT-N10+ Chapter 3: Conguring the clients Windows ® XP 1. Click Start > Control Panel > Network Connection. Right-click Local Area Connection then select Properties. 2. Select Internet Protocol (TCP/IP), then click Properties. 3. Select Obtain an IP address automatically if you want the IP settings to be assigned automatically. Otherwise, select Use the following IP address: and key in IP address, Subnet mask, and Default gateway. 4. Select Obtain DNS server address automatically if you want the DNS server settings to be assigned automatically. Otherwise, select Use the following DNS

  • Asus RT-N10 B1 (RT-N10+ B1), 35 Chapter 5: Installing the utilities RT-N10+ 4. Key in desired network name or SSID (service set identier). When done, click Next. 5. Create and key in a passphrase consisting of 8-63 characters or use the automatically generated passphrase then click Next. A passphrase is a sentence, phrase, or sequence of alpha-numeric characters used to generate a security key.

  • Asus RT-N10 B1 (RT-N10+ B1), 48 RT-N10+ Appendices These requirements apply to the modied work as a whole. If identiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to

  • 8 RT-N10+ Chapter 1: Knowing your wireless router Rear panel Label Description WAN Connect an RJ-45 Ethernet cable to this port to establish WAN connection. LAN1-LAN4 Connect RJ-45 Ethernet cables to these ports to establish LAN connection. Power Insert the AC adapter into this port to connect your router to a power source. WPS Press this button to

  • Asus RT-N10 B1 (RT-N10+ B1), 4 Table of contents About this guide This user guide contains information that you need to install and congure the ASUS Wireless Router. How this guide is organized This guide contains the following parts: • Chapter 1: Knowing your wireless router This chapter provides information on the package contents, system requirements, hardware features, and LED indicators of the ASUS Wireless Router. • Chapter 2: Getting started This chapter provides instructions on setting up the Router and Access Point modes of the ASUS Wireless Router. • Chapter 3: Conguring the network clients This chapter provides instructio

  • 34 RT-N10+ Chapter 5: Installing the utilities 2. Press the WPS button on your router. WPS button 3. On the WPS Wizard, click Next to continue. Notes: • When running WPS, the Internet connection pauses briey then reestablishes the connection. • If the WPS button is pushed without running the WPS Wizard, the WPS LED indicator

  • Asus RT-N10 B1 (RT-N10+ B1), 44 RT-N10+ Appendices Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can ra

  • Asus RT-N10 B1 (RT-N10+ B1), 15 Chapter 2: Setting up the hardware RT-N10+ Setting up the wireless router in Repeater mode In the Repeater mode, the wireless router extends your wireless network coverage and provides you with higher quality wireless radio signals. The NAT, rewall, and IP sharing services are disabled. To set up the wireless router in Repeater mode: 1. Connect your devices. 2. Launch your web browser and the QIS web page appears automatically. Select Repeater mode, then click Next. Note: If the QIS web page does not appear after you launched your web browser, disable the proxy settings on your web browser. RT-N10+ Client Modem Wireless Router Note: We recommend that

  • 29 Chapter 5: Installing the utilities RT-N10+ 5 Installing the utilities 2. Click Next. Installing the utilities The support CD contains the utilities for conguring the ASUS Wireless Router. To install the ASUS WLAN Utilities in Microsoft ® Windows, insert the support CD in the CD drive. If Autorun is disabled, run setup.exe from

  • Asus RT-N10 B1 (RT-N10+ B1), 41 Chapter 6: Troubleshooting RT-N10+ Problem Action How to restore the system to its default settings? • Press the Restore button at the rear panel of the wireless router for more than ve seconds. • Refer to the section Restoring/Saving/ Uploading settings in Chapter 4 of this user manual. The following are the factory default settings: User Name: admin Password: admin Enable DHCP: Yes (if WAN cable is plugged in) IP address: 192.168.1.1 Domain Name: (Blank) Subnet Mask: 255.255.255.0 DNS Server 1: 192.168.1.1 DNS Server 2: (Blank) SSID: ASUS I cannot use 192.168.1.1 to enter the web GUI. Check the router’s operation mode. • In the Rout

  • Asus RT-N10 B1 (RT-N10+ B1), 33 Chapter 5: Installing the utilities RT-N10+ WPS Wizard WPS (Wi-Fi Protected Setup) allows you to set up a secure and protected wireless network easily. Note: • Ensure that you use a wireless LAN adapter with WPS function. • Windows ® operating systems and wireless LAN cards/adapters that support WPS: Using WPS Wizard OS Support Wireless Adapter Support Windows 7 Intel wireless LAN card ASUS USB-N13 with UT v4.1.1.0 or later ASUS PCE-N13 with UT v4.0.6.0 or later ASUS USB-N10 with UT v1.0.0.9 or later XP SP3 Intel wireless LAN card ASUS USB-N13 with UT v4.1.1.0 or later ASUS PCE-N13 with UT

  • Asus RT-N10 B1 (RT-N10+ B1), 43 Chapter 6: Troubleshooting RT-N10+ 5. After restarting the router, why is it that I see different WAN IPs in MS DOS and in the router conguration page? This is normal. The interval time between the ISP DNS server and ASUS DDNS results in different WAN IPs in MS DOS and in the router conguration page. Different ISPs may have different interval time for IP updating. 6. Is the ASUS DDNS service free, or is it just a trial version? The ASUS DDNS service is a free and embedded service in some ASUS routers. Check your ASUS router if it supports the ASUS DDNS service.

  • Asus RT-N10 B1 (RT-N10+ B1), 42 RT-N10+ Chapter 6: Troubleshooting ASUS DDNS Service RT-N10+ supports the ASUS DDNS service. When exchanging devices at the service center, if you have registered the ASUS DDNS service and want to keep the original domain name, data transfer is a must. Visit your local service center for more information. Notes: • If there is no activity in the domain - such as reconguring the router or accessing the registered domain name - within 90 days, the system automatically deletes the registered information. • If you encounter any problem or difculty in using your device, contact the servi

  • 50 RT-N10+ Appendices 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted onl

  • Asus RT-N10 B1 (RT-N10+ B1), 37 Chapter 5: Installing the utilities RT-N10+ Adding network devices using a USB ash drive With the WPS utility, you can add devices to your network using a USB ash drive. To add network devices using a USB ash drive: 1. In the WPS Wizard, click Save settings to a USB ash drive. 2. Insert a USB ash drive into your computer's USB port, then select the drive from the dropdown list. When done, click Next .

  • Asus RT-N10 B1 (RT-N10+ B1), 38 RT-N10+ Chapter 5: Installing the utilities 3. Unplug the USB flash drive from your computer then insert it to the other computer that you want to add to your wireless network. 4. Locate SetupWireless.exe from the USB drive, and double-click to run it. Click Yes to add the computer to the wireless network. 5. Click OK to exit the Wireless Network Setup Wizard.

  • Asus RT-N10 B1 (RT-N10+ B1), 45 Appendices RT-N10+ Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements – Article 3 Protection requirements for health and safety – Article 3.1a Testing for electric safety according to EN 60950-1 has been conducted. These are considered relevant and sufcient. Protection requirements for electromagnetic compatibility – Article 3.1b Testing for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-17 has been co

  • Asus RT-N10 B1 (RT-N10+ B1), 40 RT-N10+ Chapter 6: Troubleshooting Problem Action Cannot access the Internet via wireless LAN adapter. • Move the router closer to the wireless client. • Check whether the wireless adapter is connected to the correct wireless router. • Check whether the wireless channel in use conforms to the channels available in your country/area. • Check the encryption settings. • Check if the ADSL or Cable connection is correct. • Retry using another Ethernet cable. Inte

  • Asus RT-N10 B1 (RT-N10+ B1), 7 Chapter 1: Knowing your wireless router RT-N10+ Status indicators LED Status Indication Power Off No power On System ready Flashing Rescue mode WLAN Off No power On Wireless system ready Flashing Transmitting or receiving data (wireless) WPS Flashing WPS processing LAN 1-4 (Local Area Network) Off No power or no physical connection On Has physical connection to an Ethernet network Flashing Transmitting or receiving data (through Ethernet cable) WAN (Wide Area Network) Off No power or no physical connection On Has physical connection to an Ethernet network

Related Products and Documents (Network Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Nokta Pointer Operation & user’s manual nokta/pointer-AHO.pdf 13 Sep 2023 6
2 Planet Technology GSD-Series Operation & user’s manual planet-technology/gsd-series-1G8.pdf 22 Apr 2023 20
3 Kyocera FS-1128MFP Service manual kyocera/fs-1128mfp-Q67.pdf 08 Dec 2022 252
4 Polaris Automatic Gate Operators 500 Series Operation & user’s manual polaris/500-series-FK5.pdf 12 Aug 2023 43
5 Fisher-Price GEOTRAX P1370 Operation & user’s manual fisher-price/geotrax-p1370-NLX.pdf 21 Feb 2024 12 2.13 Mb
6 Poulan Pro P3314 Instruction manual poulan-pro/p3314-RE3.pdf 08 Apr 2023 61

Similar Resources:

  • Canon

    PIXMA MX860 series

    (106 pages)
    MX860 / MX868 Service Manual Revision 0 COPYRIGHTc2009 CANON INC. CANON MX860 012009 XX 0.00-0 Scope This manual has been issued by Canon Inc., to provide the service technicians of this product with the information necessary for qualified persons to learn technical theory, installation, maintenance, and repair of products. The manual covers information ap …
  • Allied Telesis

    AT-FS750/24POE

    (2 pages)
    Key FeaturesVLAN• IEEE 802.1Q tagged• Port-based • Up to 64 groupsQuality of Service Classification•IEEE 802.1p tagging • Port-based priority • Four priority queues per portIP Multicast Support (IPv4) • IGMP snooping(v1/v2)• Static multicast group• Spanning-Tree, IEEE 802.1d/wIEEE 802.3ad Link Aggregation• ManualIEEE 802.1x Port-based and …
  • LevelOne

    WBR-6800

    (86 pages)
    LevelOne WBR-6800 N Wireless 3G Router Quick Installation Guide English Português Deutsch Svenska Français Slovenščina Español 繁體中文 Nederlands 한국어 Dansk Русский Italiano Ελληνικά …
  • Brocade Communications Systems

    NetIron CES 2000 Series

    (118 pages)
    53-1003823-0118 August 2015Brocade NetIron CES 2000Series and NetIron CER2000 SeriesHardware Installation GuideSupported Release: Multi-Service IronWare R05.9.00 …
  • Cisco

    PRP-2=

    (88 pages)
    Americas Headquarters:Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USAPerformance Route Processor Installation and ConfigurationProduct Number: PRP-2=, PRP-3= Document Order Number: OL-17436-01This hardware installation and configuration note describes the performance route processor (PRP) PRP-2 and PRP-3 route processors for use in Ci …
  • D-Link

    DAP-1320

    (48 pages)
    WIRELESS RANGE EXTENDER N300 DAP-1320QUICK INSTALLATION GUIDEКРАТКОЕ РУКОВОДСТВО ПО УСТАНОВКЕGUÍA DE INSTALACIÓN RÁPIDAGUIA DE INSTALAÇÃO RÁPIDA快速安裝指南PETUNJUK PEMASANGAN CEPAT …

Comments, Questions and Opinions: