Manualios.com

Asus RX3042H Operation & User’s Manual

Asus RX3042H Manual Online:

4.25, 827 votes
Asus RX3042H User Manual
Asus RX3042H User Guide
Asus RX3042H Online Manual

Text of Asus RX3042H User Guide:

  • Asus RX3042H, RX3042H User's Manual Quick Start Guide 19 13.On any PC connected to one of the four LAN ports on the RX3042H, open your Web browser, and type the following URL in the address/location box, and press <Enter>: http://192.168.1.1 This is the predefined IP address for the LAN port on the RX3042H. A login screen displays, as shown in Figure 3.2. Figure 3.2 Login Screen If you have problem connecting to the RX3042H, you may want to check if your PC is configured to accept IP address assignment from the RX3042H. Another method is to set the IP address of your PC to any IP address in the 192.168.1.0 network, such as 192.168.1.2. 14.Enter your username

  • Asus RX3042H, RX3042H User's Manual Configuring Firewall 71 Table 9.3. ACL Rule Configuration Parameters Field Description Filter Direction – choose the available option from the drop-down list to configure the ACL. For dual-WAN configuration, two options are available – LAN ->WAN and WAN ->LAN. For WAN + DMZ configuration, six options are available – LAN ->WAN, WAN ->LAN, LAN ->DMZ, DMZ->LAN, WAN ->DMZ and DMZ ->WAN. ID Add New Click on this option to add a new ACL rule. Rule Number Select a rule from the drop-down list, to modify its settings. Move to This option allow

  • Asus RX3042H, Router Setup RX3042H User's Manual 32 Setting Description Connect on Demand Click on the Enable or Disable radio button to enable or disable this option. Status On: PPPoE connection is active. Off: No PPPoE connection is active. Connecting: RX3042H is trying to connect to your ISP using PPPoE connection mode. Manual Disconnect/ Connect Click the Disconnect or Connect button to disconnect or connect using the PPPoE connection mode. 5.2.2.2 Configuring PPPoE for WAN Follow the instructions below to configure PPPoE settings: 1. Open the Network Setup configuration

  • Asus RX3042H, RX3042H User's Manual Router Setup 29 5. Click " Apply " to save the settings. If you were using an Ethernet connection for the current session, and changed the IP address or subnet mask, the connection will be terminated. 6. You will see the following message displayed as shown below. 7. You will be prompted to log back into the Configuration Manager once the timer elapses. 5.2 WAN/DMZ Configuration This section describes how to configure WAN/DMZ settings for the WAN interface on the RX3042H that communicates with your ISP. Youʼll learn to configure IP address, DHCP and DNS server for your WAN in this section. DMZ (short for demilitarize

  • Asus RX3042H, RX3042H User's Manual Routing 53 7 Routing You can use Configuration Manager to define specific routes for your Internet and network data communication. This chapter describes basic routing concepts and provides instructions for creating static routes. Note that most users do not need to define static routes. 7.1 Overview of IP Routes The essential challenge of a router is: when it receives data intended for a particular destination, which next device should it send that data to? When

  • Asus RX3042H, Quick Start Guide RX3042H User's Manual 20 15. Follow the instructions described in Chapter 5 “Router Setup” to set up the LAN and WAN settings for RX3042H. After completing the basic configuration for RX3042H, read the following section to determine if you can access the Internet. 3.3.2 Testing Your Setup At this point, the RX3042H should enable any computers on your LAN to use the RX3042Hʼs ADSL or cable modem connection to access the Internet. To test the Internet connection, open y

  • 94 System Management RX3042H User's Manual Manager, click the Management ->Time Zone menu. 10.5 SNMP Setup SNMP (Simple Network Management Protocol) as its name suggests is used for network management. You may use the SNMP configuration page to enable or disable the SNMP support. 10.5.1 SNMP Configuration Parameters Table 10.1 describes the configuration para

  • Asus RX3042H, Configuring Firewall RX3042H User's Manual 76 Figure 9.5. ACL Configuration Example explanation of these fields. 8. Assign a priority for this rule by selecting a number from the Move to drop-down list. Note that the number indicates the priority of the rule with 1 being the highest. Higher priority rules will be examined prior to the lower priority rules by the firewall. 9. Click on the Add button to create the new ACL rule. The new ACL rule will then be displayed in the in

  • Asus RX3042H, Configuring Firewall RX3042H User's Manual 66 Figure 9.1 NAPT – Map Any Internal PCs to a Single Global IP Address Figure 9.2 Reverse NAPT – Relayed Incoming Packets to the Internal Host Base on the Protocol, Port Number or IP Address

  • RX3042H User's Manual Configuring Firewall 73 IP Address, Subnet Select any of these options and enter details as described in the Source IP section above. Service Select a service, from the drop-down list, to which this rule should apply. If the desired service is not listed, click on the Edit button to create a new service. Time Select a time slot during which this

  • RX3042H User's Manual Getting to Know RX3042H 7 Table 2.2 Front Panel Label and LEDs LED Label Color Status Indication 1 Power Green ON RX3042H is powered on. OFF RX3042H is powered off. 2 Status Green 3 USB Identifies the USB port. 1-2 Green OFF USB device is not detected. ON USB device is detected. 4 WAN Identifies the WAN port. 1-2 OFF No link is detec

  • Asus RX3042H, Router Setup RX3042H User's Manual 36 Figure 5.5. WAN – Dynamic IP (DHCP client) Configuration 5.2.4.1 Configuring Dynamic IP for WAN Follow the instructions below to configure dynamic IP settings: 1. Open the Network Setup configuration page by clicking the Router Setup -> Connection menu. 2. Select which WAN port (WAN1/WAN2) to configure for dynamic connection mode. 3. Select Dynamic from the Connection Mode drop-down list as shown in Figure 5.5. Note that the IP addresses for the primary and/or the secondary DNS servers are automatically assigned secondary DNS servers if you want to use your preferred DNS servers; otherwise, skip this

  • 98 System Management RX3042H User's Manual Sometimes, you may find that you have no way to access the RX3042H, e.g. you forget your password or the IP address of RX3042H. The only way out in this scenario is to reset the system configuration to the factory default by pressing the reset button for at least 5 seconds. The system configuration will be rever

  • Configuring Firewall RX3042H User's Manual 86 Note: Only one PC can use one particular special application at a time.. 9.8.1 Special Application Configuration Parameters Table 9.7 describes the configuration parameters available for virtual server configuration. Table 9.7. Special Application Configuration Parameters Setting Description Enabled Check this b

  • Asus RX3042H, 117 RX3042H User's Manual Index changing, 90 default, 19, 24 recovering, 111 PC configuration, 13 PC Configuration static IP addresses, 17 Ping, 111 Power adapter, 12 Primary DNS, 37 Quick Configuration logging in, 19 Rear Panel, 8 RIP Configuration page, 54 Routing Configuration page, 54, 56 Secondary DNS, 37 Static IP addresses, 17 Static Route Configuration page, 56 Static routes adding, 57 Statically assigned IP addresses, 45 Subnet masks, 107 System requirements for Configuration Ma

  • Asus RX3042H, 99 RX3042H User's Manual System Management 4. Click on button to backup the system configuration. 10.7.3 Restore System Configuration Follow the steps below to backup system configuration: 1. Open the System Configuration Restore page by clicking the Management ->Configuration ->Restore menu. Figure 10.12 Restore System Configuration Page 2. Enter the path and name of the system configuration file that you want to restore in the “Configuration File” text box. Alternatively, you may click on the "Browse..." button to search for the system configuration file on

  • Asus RX3042H, 101 RX3042H User's Manual System Management Figure 10.15 System Reboot Counter Timer 10.8 Firmware Upgrade ASUSTeK may from time to time provide you with an update to the firmware running on the RX3042H. All system software is contained in a single file, called an image. Configuration Manager provides an easy way to upload the new firmware image. To upgrade the image, follow this procedure: 1. Open the Firmware Upgrade page, as shown in Figure 10.16, by clicking the System ->Firmware Upgrade menu. Figure 10.16 Firmware Upgrade Page 2.

  • Asus RX3042H, Configuring Firewall RX3042H User's Manual 82 Setting Description Redirect Service Select a service, from the drop-down list, to which this rule should apply. If the desired service is not listed, click on the " Edit " button to create a new service. Bypass ACL Check this option if you do not want firewall to perform access control on this virtual server. This means that the virtual server allows anyone to access the service provided. If you want to control who has access to this virtual server, un-check this option and crea

  • Asus RX3042H, x Introduction RX3042H User's Manual Table 5.1 LAN Configuration Parameters ..................................... 28 Table 5.2 WAN PPPoE Configuration Parameters ....................... 31 Table 5.3 WAN PPPoE Unnumbered Configuration Parameters . 34 Table 5.4 WAN Static IP Configuration Parameters ..................... 37 Table 5.5 WAN PPTP Configuration Parameters ......................... 39 Table 5.6 WAN Load Balancing and Line Back Up Configuration Parameters ...................................................................

  • Asus RX3042H, RX3042H User's Manual Troubleshooting 111 12.1 Diagnosing Problem using IP Utilities 12.1.1 ping Ping is a command you can use to check whether your PC can recognize other computers on your network and the Internet. A ping command sends a message to the computer you specify. If the computer receives the message, it sends messages in reply. To use it, you must know the IP address of the computer with which you are trying to communicate. On Windows-based computers, you can execute a ping command from the Start menu. Click the Start bu

  • Router Setup RX3042H User's Manual 34 5.2.3.1 WAN PPPoE Unnumbered Configuration Parameters Table 5.3 describes the configuration parameters available for PPPoE Unnumbered connection mode. Table 5.3. WAN PPPoE Unnumbered Configuration Parameters Setting Description Link Select a port to configure. Available options are WAN1, WAN2 or DMZ. Conn

  • Asus RX3042H, RX3042H User's Manual Using the Configuration Manager 23 4 Using the Configuration Manager The RX3042H includes a preinstalled program called the Configuration Manager, which provides an interface to the software installed on the device. It enables you to configure the device settings to meet the needs of your network. You access it through your web browser from any PC connected to the RX3042H via the LAN or the WAN ports. This chapter describes the general guides for using the Configuration Manager. 4.1 Log into the Configuration Manager The Configuration Manager program is

  • Asus RX3042H, RX3042H User's Manual Configuring Firewall 63 9 Configuring Firewall and NAT The RX3042H provides built-in firewall/NAT functions, enabling you to protect the system against denial of service (DoS) attacks and other types of malicious accesses to your LAN while providing Internet access sharing at the same time. You can also specify how to monitor attempted attacks, and who should be automatically notified. This chapter describes how to create/modify/delete ACL (Access Control List) rules to control the data passing through yo

  • Asus RX3042H, RX3042H User's Manual Configuring Firewall 83 Application Service Port Numbers Netmeeting or VoIP 1503-1503, 1720(ALG) NEWS TCP 119-119 PC Anywhere TCP 5631 PC Anywhere TCP 5631, UDP 5632 POP3 TCP 110-110 Powwow Chat 13233-13233 Red Alert II 1234-1237 SMTP TCP 25-25 Sudden Strike 2300-2400 TELNET TCP 23-23 Win VNC UDP 5800-5800 9.7.2 Virtual Server Example 1 – Web Server Figure 9.10 illustrates the network topology for the web server deployment. This web server provides HTTP service using TCP port 8080. Figure 9.10. Virtual Server Deployment Topology Following describes the procedure to setup the

  • Asus RX3042H, DHCP Server Configuration RX3042H User's Manual 46 6.1.3 Configuring DHCP Server Note: By default, the RX3042H is configured as a DHCP server on the LAN side, with a predefined IP address pool of 192.168.1.100 through 192.168.1.149 (subnet mask 255.255.255.0). To change this range of addresses, follow the procedures described in this section. First, you must configure your PCs to accept DHCP information assigned by a DHCP server: 1. Open the DHCP Server Configuration page, shown in Figure 6.1, by clicking Advanced -> DHCP Server menu. Figure 6.1. DHCP Server Configuration Pag

  • Asus RX3042H, 102 System Management RX3042H User's Manual Figure 10.17 Selecting Firmware from the File Manager 3. Click on Apply button to update the firmware. A dialog window, such as the one below, will pop up to ask for confirmation of the firmware upgrade. Click the OK button to proceed; otherwise, click the Cancel button to cancel the action. Figure 10.18 Firmware Upgrade Confirmation 4. Firmware upgrade status and progress will be shown as illustrated in Figure 10.19 Figure 10.19 Firmware Upgrade Progress

  • Asus RX3042H, RX3042H User's Manual Using the Confi guration Manager 25 Figure 4.2 Typical Confi guration Manager Page 4.2.1 Menu Navigation • To expand a group of related menus, double click the menu or the icon: • To contract a group of related menus, double click the menu or the icon: • To open a specifi c confi guration page, double click the menu or the icon: 4.2.2 Commonly Used Buttons and Icons The following buttons or icons are used throughout the application. The following table describes the function for each button or icon. Table 4.1 Description of Commonly Used Bottons and Icons Button Function Stores any changes you have made on the current page. Adds the existing co

  • Asus RX3042H, RX3042H User's Manual Quick Start Guide 11 3 Quick Start Guide This Quick Start Guide provides basic instructions for connecting the RX3042H to a computer or a network and to the Internet. • Part 1 provides instructions to set up the hardware. • Part 2 describes how to configure Internet properties on your computer(s). • Part 3 shows you how to configure basic settings on the RX3042H to get your LAN connected to the Internet. After setting up and configuring the device, you can follow the instructions on page 15 to verify that it is working properly. This Quick Start Guide assumes that yo

Related Products and Documents (Network Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Enterasys XSR-XPEDITION Configuration manual enterasys/xsr-xpedition-498.pdf 02 Nov 2023 55 0.17 Mb
2 Clarion VZ509 Owner's manual & installation manual clarion/vz509-JQ3.pdf 09 Sep 2023 70 8.29 Mb
3 Canon MV5iMC Instruction manual canon/mv5imc-2LF.pdf 29 Dec 2023 181 5.94 Mb
4 Weslo Pursuit T 89 Bike Manual  weslo/pursuit-t-89-bike-2DS.pdf 28 Feb 2023 16 1.46 Mb
5 Audiovox GMRS1262CH Owner's manual audiovox/gmrs1262ch-2B5.pdf 02 Sep 2022 28 0.24 Mb
6 TechniSat DigitRadio 200 Brochure & specs technisat/digitradio-200-857.pdf 10 Feb 2024 2 0.32 Mb

Similar Resources:

  • H3C

    H3C S7500E-X

    (14 pages)
    H3C S7500E-X Attack Protection Configuration Examples Copyright © 2015 Hangzhou H3C Technologies Co., Ltd. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Hangzhou H3C Technologies Co., Ltd. The information in this document is …
  • Delta

    DX-3001 Series

    (123 pages)
    www.deltaww.com2016-10-19DX-3001 Series Industrial 3G/WAN Cloud Router User ManualIndustrial Automation HeadquartersDelta Electronics, Inc. Taoyuan Technology CenterNo.18, Xinglong Rd., Taoyuan City, Taoyuan County 33068, TaiwanTEL: 886-3-362-6301 / FAX: 886-3-371-6301AsiaDelta Electronics (Jiangsu) Ltd.Wujiang Plant 31688 Jiangxing East Road, Wujiang Econom …
  • Raritan

    Dominion KX II

    (6 pages)
    KX II Quick Setup Guide 1QSG-DKX2-v2.1.10-0F-E y 255-62-4022-00 Dominion® KX II Quick Setup Guide Thank you for your purchase of the KX II, the industry's most full-featured, enterprise-class, secure, digital KVM (Keyboard, Video, Mouse) switch. This Quick Setup Guide explains how to install and configure the KX II. For additional information on a …
  • Belkin

    Range Extender/ Access Point

    (57 pages)
    Belkin GmbHHanebergstrasse 280637 Munich, Germany+49 (0) 89 143405 0+49 (0) 89 143405 100 faxBelkin SAS130 rue de Silly92100 Boulogne-Billancourt, France+33 (0) 1 41 03 14 40+33 (0) 1 41 31 01 72 faxBelkin Ltd.Express Business Park, Shipton WayRushden, NN10 6GL, United Kingdom+44 (0) 1933 35 2000+44 (0) 1933 31 2000 faxBelkin B.V.Boeing Avenue 3331119 PH Sch …
  • LevelOne

    FSW-0511

    (17 pages)
    FSW-0511 / FSW-0811 5 / 8 Port Fast Ethernet Switch Quick Installation Guide Português English Svenska Deutsch Slovenščina Français Español 繁體中文 Nederlands 한국어 Dansk Русский Italiano Ελληνικά 1Polski …
  • Patton electronics

    3088

    (12 pages)
    RocketLink-G™ Model 3088 Series G.SHDSL NTU with Fixed Serial Interfaces Quick Start Guide Important —This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial or residential environment. Document Number: 03325U7-001 Rev. CPart Number: 07M3088-QS Revised: July 17, 2008 S …

Comments, Questions and Opinions: