Siemens SS2624 Operation & User’s Manual

Text of Siemens SS2624 User Guide:

• Siemens SS2624, Advanced Configuration 79 Buttons Save Save the RIP setting. This has no effect on the Static Routing Table. Add Add a new entry to the Static Routing table, using the data shown in the "Properties" area on screen. The entry selected in the list is ignored, and has no effect. Update Update the current Static Routing Table entry, using the data shown in the "Properties" area on screen. Delete Delete the current Static Routing Table entry. Clear Form Clear all data from the "Properties" area, ready for input of a new entry for the Static Routing table. Gener

• PC Configuration 41 2. Select Add. For the printer type, select Remote Unix (lpd) Queue. 3. Use the following data to complete the resulting dialog. Field Data Example Name Enter a name for this printer gw_prn Spool Directory /var/spool/lpd/printer_name Where printer_name is the "Name" entry above. /var/spool/lpd/gw_prn File Limit Enter a suitable number. 0 (no limit) DSL/Cable

• Siemens SS2624, PC Configuration 27 Figure 16 - Windows NT4.0 - Add Gateway 2. The DNS should be set to the address provided by your ISP, as follows: • Click the DNS tab. • On the DNS screen, shown below, click the Add button (under DNS Service Search Order), and enter the DNS provided by your ISP.

• Siemens SS2624, 87 Appendix B Specifications SpeedStream Wireless DSL/Cable Router Model SS2624 Wireless DSL/Cable Router Dimensions 204mm(W) * 127mm(D) * 29mm(H)----Update for new case and put in inches and mm Operating Temperature 0° C to 40° C Storage Temperature -10° C to 70° C Network Protocol: NAT, PPPoE, HTTP, DHCP client/server, TCP/IP Network Interface: 5 Ethernet: 4 * 10/100BaseT (RJ45) auto-Switching Hub ports for LAN devices 1 * 10BaseT (RJ45) for WAN Printer Port 1 * parallel printer port LEDs 14 External

• Siemens SS2624, DSL/Cable Router User Guide 18 WEP data encryption • WEP (Wired Equivalent Privacy) status will display "Enabled" or "Disabled", depending on whether WEP is being used. If used, data is Encrypted before being transmitted, making communication more secure. • Click the "Configure WEP" button to access the WEP sub-screen, and view or change the WEP settings. Access Point Allow LAN access by … • All Wireless Stations - All wireless stations can use the access point to access your LAN. • S

• Siemens SS2624, Setup 11 If you can't connect If the Router does not respond, check the following: • The DSL/Cable Router is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" command: • Open the MS-DOS window or command prompt window. • Enter the command: ping 192.168.254.254 If no response is received, either the connection is not working, or your PC's IP address is not compatible with the DSL/Cable Router's IP Address. (See next item.) • If your PC is using a fixed IP Address, its IP Address must be w

• Siemens SS2624, PC Configuration 29 Checking TCP/IP Settings - Windows 2000: 1. Select Control Panel - Network and Dial-up Connection. 2. Right click the Local Area Connection icon and select Properties. You should see a screen like the following: Figure 18: Network Configuration (Win 2000) 3. Select the TCP/IP protocol for your network card. 4. Click on the Properties button. You should then see a screen like the following.

• DSL/Cable Router User Guide 66 Group Members Screen This screen is displayed when the Members button on the Access Control screen is clicked. Figure 38: Group Members Use this screen to add or remove members (PCs) from the current group. • The "Del >>" button will remove the selected PC (in the Members list) from the current group. • The "<< Ad

• Siemens SS2624, DSL/Cable Router User Guide 52 Figure 30: Advanced Internet Screen Conferencing & Telephony Most applications are supported transparently by the DSL/Cable Router. But sometimes it is not clear which PC should receive an incoming connection. This problem could arise with the following Conferencing & Telephony applications: • CUseeME • ICQ • ICU II (ICU 2) • Internet Phone • mIRC • MS NetMeeting • Yahoo Messenger If this problem arises, you can use this screen to set which PC should receive an incoming connection, as described b

• Siemens SS2624, DSL/Cable Router User Guide 30 Figure 19: TCP/IP Properties (Win 2000) 5. Ensure your TCP/IP settings are correct: Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows settings. Restart your PC to ensure it obtains an IP Address from the DSL/Cable Router. Using a fixed IP Address ("Use the following IP Address") If your PC is already configured, check your ISP’s documentation before making the following changes. • Enter the DSL/Cable Router's IP address in the Default gateway field and click OK. • If the DNS Server fields are empty, select Use the following DNS server addresses,

• Siemens SS2624, Introduction 5 Rear Panel Figure 2: Rear Panel Printer Port Standard parallel printer port. If you wish to share a printer, connect it here. Aerial Antenna Best results are usually obtained with the antenna in a vertical position. Reset Button This button has three (3) functions: • Reboot . When pressed and released, the DSL/Cable Router will reboot (restart). • Diagnostic print-out . If held down for 3 seconds, a diagnostic print-out will be sent to the attached printer. • Ensure the printer is ready. • Both Print LEDs will flash simultaneously during

• DSL/Cable Router User Guide 54 Data - Special Applications Screen Checkbox Use this to Enable or Disable this Special Application as required. Name Enter a descriptive name to identify this Special Application. Incoming Ports • Type - Select the protocol (TCP or UDP) used when you receive data from the special application or service. (Note: Some applications use different

• Siemens SS2624, Operation and Status 45 questing the Internet connection. • Destination - The Internet address which was requested. If the URL Filter is enabled, this address will be shown as a URL. Otherwise, the IP address will be displayed. • Blocked - If the request was blocked by the URL Filter function, this will display "Yes". Otherwise, it will be blank. "Connection Details" Button Click this button to open a sub-window and view a detailed description of the current connection. Depending on the type of connection, a "log" may also be available. LAN IP

• Siemens SS2624, DSL/Cable Router User Guide 62 Remote Management This feature allows you to manage the DSL/Cable Router via the Internet. An example screen is shown below. Figure 36: Remote Management Screen Data - Remote Management Screen Remote Management Enable Remote Management Enable to allow management via the Internet. If Disabled, this device will ignore management connection attempts from the Internet. Port Number Enter a port number between 1024 and 65535 (8080 is recom- mended). This port number must be specified when you connect (see below). Note: The default port number

• Siemens SS2624, PC Configuration 37 LPD/LPR Printing LPD/LPR printing can be used with Windows NT 4.0 Server or Windows 2000. No software needs to be installed on client PCs. Windows NT 4.0 Server Configuration To use LPD printing, Microsoft TCP/IP Printing must be installed and enabled. This can be checked using Start-Settings-Control Panel-Network - Services. To install LPD printing using the DSL/Cable Router, follow this procedure: 1. Go to Start-Settings-Printer and invoke the Add Printer wizard. 2. When prompted w

• Advanced Configuration 81 Security The security screen is accessed by the Security option on the Advanced menu. Figure 47: Security Screen Data - Security Screen Firewall Enable DoS Firewall If enabled, DoS (Denial of Service) attacks will be detected and blocked. The default is enabled. It is strongly recommended that this setting be left enabled. Note: • A DoS attack does not a

• Siemens SS2624, DSL/Cable Router User Guide 14 Home Screen After finishing the Setup Wizard, you will see the Home screen. When you connect in the future, you will see this screen when you connect. An example screen is shown below. Figure 4: Home Screen Navigation & Data Input • Use the menu bar on the left of the screen, and the "Back" button on your Browser, for navigation. • Changing to another screen without clicking "Save" does NOT save any changes you may have made. You must "Save" before changing screens or your data will be ignored. • When

• Siemens SS2624, DSL/Cable Router User Guide 56 Add Filter String To add an entry to the list, enter it here, and click the "Add" button. An entry may be a Domain name (e.g. www.trash.com) or simply a string. (e.g. ads/ ) Any URL which contains ANY entry ANYWHERE in the URL will be blocked. Buttons Delete/Delete All Use these buttons to delete the selected entry or all entries, as required. Multiple entries can be selected by holding down the CTRL key while selecting.(On the Macintosh, hold the SHIFT key while selecting

• Siemens SS2624, Advanced Configuration 77 Routing Overview • If you don't have other Routers or Gateways on your LAN, you can ignore the "Routing" page completely. • If the DSL/Cable Router is only acting as a Gateway for the local LAN segment, ignore the "Routing" page even if your LAN has other Routers. • If your LAN has a standard Router (e.g. Cisco) on your LAN, and the DSL/Cable Router is to act as a Gateway for all LAN segments, enable RIP (Routing Information Protocol) and ignore the Static Routing table. • If your LAN has other Gateways and Routers, and you wish t

• Siemens SS2624, DSL/Cable Router User Guide 26 Figure 15: Windows NT4.0 - IP Address 3. Select the network card for your LAN. 4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP Address, as explained below. Obtain an IP address from a DHCP Server This is the default Windows setting. Using this method is recommended . By default, the DSL/Cable Router will act as a DHCP Server. Restart your PC to ensure it obtains an IP Address from the DSL/Cable Router. Specify an IP Address If your PC is already configured, check with your network administrator before making the following chang

• Siemens SS2624, Advanced Features 59 External Port No. The port number used by Internet users when connecting to the Server. This is normally the same as the Internal Port Number. If it is different, this device will perform a "mapping" or "translation" function, allowing the server to use one port address, while clients use a different port address. Buttons Defaults This will delete any Servers you have defined, and set the pre- defined Servers to use their default port numbers. Disable All This will cause the "Enable" setting of all Virtual Servers to be set OFF. Add Add a new entr

• Siemens SS2624, DSL/Cable Router User Guide 40 Macintosh Clients From your Macintosh, you can access the Internet via the DSL/Cable Router. The procedure is as follows. 1. Open the TCP/IP Control Panel. 2. Select Ethernet from the Connect via pop-up menu. 3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left blank. 4. Close the TCP/IP panel, saving your settings. Note: If using manually assigned IP addresses instead of DHCP, the required changes are: • Set the Router Address field to the DSL/Cable Router's IP Address. • Ensure your

• DSL/Cable Router User Guide 84 Solution 2: The DSL/Cable Router processes the data passing through it, so it is not transparent. Use the Special Applications feature to allow the use of Internet applications which do not function correctly. If this does solve the problem you can use the DMZ function. This should work with almost every application, but: • It is a security risk,

• Siemens SS2624, Advanced Features 67 Services Screen This screen is displayed when the Services button on the Access Control screen is clicked. Figure 39: Services Data - Services Screen Available Services Available Services This lists all the available services. "Delete" button Use this to delete any Service you have added. Pre-defined Services can not be deleted. Add New Service Name Enter a descriptive name to identify this service. Type Select the protocol (TCP, UDP, ICMP) used to the remote system or service. Start Port For TCP and UDP Services, enter the beginning of the range of port numbers used by the service. If the service uses

• Siemens SS2624, PC Configuration 25 Checking TCP/IP Settings - Windows NT4.0 1. Select Control Panel - Network, and, on the Protocols tab, select the TCP/IP protocol, as shown below. Figure 14: Windows NT4.0 - TCP/IP 2. Click the Properties button to see a screen like the one below.

• Siemens SS2624, Advanced Features 57 Virtual Servers This feature allows you to make Servers on your LAN accessible to Internet users. Normally, Internet users would not be able to access a server on your LAN because: • Your Server does not have a valid external IP Address. • Attempts to connect to devices on your LAN are blocked by the firewall in this device. The "Virtual Server" feature solves these problems and allows Internet users to connect to your servers, as illustrated below. DSL/Cable Router Web Server FTP Server Internet Remote PC Remote PC Using Web Server Using FTP Server (http://203.70.212.52) 203.70.212.52 192.168.254.254 (192.168.254.10) (192.168.254.20) (LAN IP A

Related Products and Documents (Network Router):

Comparable Devices:

Similar Resources:

• Allied Telesis AT-8000S/16 (3 pages) Allied Telesis www.alliedtelesis.comDatasheet | SwitchesAT-8000S/16Layer 2 Managed Fast Ethernet Switch AT-8000S/1616 port standalone 10/100TX Layer 2 switchwith 1 active SFP bay (unpopulated) and 1standby 10/100/1000T port (RJ-45)OverviewThe small form factor AT-8000S/16 providesline-rate Layer 2 switching in an affordable,fixed-configuration platform. Feat …

• Alfa Network ADS-R02 (2 pages) ADS-R02 Support NAT For IP Sharing and 4-Port 100Mbps Base-T Fast Ethernet Switch The Router is a broadband router with LAN and WAN port. It is a special product for SOHO users to access Internet via a broadband connection. It needs only one ISP account for the whole LAN users to access Internet simultaneously, and equipped with a 10Mbps Ethernet WAN p …

• Black Box LGH1006A (2 pages) 724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.comPage 5 Page 6© Copyright 2016. Black Box Corporation. All rights reserved. Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trade …

• Cisco ASR 1004 (32 pages) CHAPTER 7-1Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation GuideOL-13208-097Cisco ASR 1004 Router Overview and InstallationThis chapter describes the Cisco ASR 1004 Router and the procedures for installing the Cisco ASR 1004 Router on an equipment shelf or tabletop or in equipment racks. It also describes how to connect interface and …

• CalAmp Fusion (2 pages) Fusion order information Single Radio Band Description Band Provider Model PN Fusion LTE Router Fixed/Portable GPS Band 13 Verizon 140-9320-000 Fusion LTE Router Wi-Fi (3 × 3) GPS Band 13 Verizon 140-9320-100 Fusion LTE Router Fixed/Portable GPS Band 17 AT&T 140-9340-000 Fusion LTE Router Wi-Fi (3 × 3) GPS Band 17 AT&T 140-9340-100 Fusion L …

• ORiNG TES-3082GT-M12-BP1 (2 pages) Quick Installation GuideVersion 1.0Quick Installation GuideIntroductionPRINTED ON RECYCLED PAPERQIGThe is a managed Ethernet switch designed forindustrial applications, such as rolling stock, vehicle, and railwayapplications. The switch boasts EN50155 compliance and M12 connectorsto ensure tight and robust connections, and guarantee reliable operationagainst …

Comments, Questions and Opinions: