Manualios.com

Cisco AVS 3120 Hardware Installation Manual

Cisco AVS 3120 Manual Online:

3.1, 1305 votes
Cisco AVS 3120 User Manual
Cisco AVS 3120 User Guide
Cisco AVS 3120 Online Manual

Text of Cisco AVS 3120 User Guide:

  • Cisco AVS 3120, 1-5 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 1 Product Overview Other Features LEDs You can use the switch LEDs to monitor switch module activity and performance. Graphical representations of the LEDs described in these sections are visible in the device manager. • System LED, page 1-5 • Stack LED, page 1-5 • Stack Master LED, page 1-6 • Stack Member LED, page 1-6 • UID and Health LEDs, page 1-6 • RJ-45 Uplink Port LEDs, page 1-6 Note The System LED (SYST), s

  • Cisco AVS 3120, 1-9 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 1 Product Overview Management Options Using the Device Manager The simplest way to manage the switch module is by using the device manager that is in the switch module memory. This is a web interface that offers quick configuration and monitoring. You can access the device manager from anywhere in your network through a web browser. Follow these steps: 1. Launch a web browser on your PC or workstation. 2. Enter the switch module IP address in the web browser,

  • Cisco AVS 3120, Index IN-5 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 W warnings Class 1 laser 2 defined 8 disposal of product 2 electrical codes 2 Ethernet cable shielding 2 Ethernet port connections 2 installation 2 installation instructions 2 jewelry removal 2 lightning activity 2 overheating prevention 2 trained and qualified personnel 2 X X2 transceiver modules described 4 installing 18 installing and removing 18 to 20 removing 19 See also 10-Gigabit Ethernet module slot

  • Cisco AVS 3120, 3-5 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 3 Troubleshooting Clearing the Switch Module IP Address and Configuration Clearing the Switch Module IP Address and Configuration This section describes how to reset the switch module by rerunning the initial configuration dialog (system configuration dialog). These are reasons why you might want to reset the switch module: • You installed the switch module in your network and cannot connect to it because you assigned the wrong IP address. • Y

  • Cisco AVS 3120, 2-5 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 2 Switch Installation HP c-Class BladeSystem Enclosure Architecture HP c-Class BladeSystem Enclosure Architecture Figure 2-1 shows the rear view of the blade enclosure in which you install the switch module. Figure 2-1 Rear View of the Blade Enclosure Consider these prerequisites before installing your switch module: • Plan for optimal airflow. • Fill any unoccupied server slot bays or power module bays with blanks. • Bays 1 through 8 are available for Ethernet switch modules. • See the server enclosure documentation for informatio

  • 3-6 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 3 Troubleshooting Locating the Switch Module Serial Number Locating the Switch Module Serial Number If you contact Cisco Technical Assistance, you need to know the serial number of your switch module. Figure 3-1 shows the serial number location on your switch module. You

  • Cisco AVS 3120, CHAPTER 3-1 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 3 Troubleshooting This chapter describes these topics for troubleshooting problems: • Diagnosing Problems, page 3-1 • Clearing the Switch Module IP Address and Configuration, page 3-5 • Replacing a Failed Stack Member, page 3-5 • Locating the Switch Module Serial Number, page 3-6 Diagnosing Problems The LEDs on the switch module front panel provide troubleshooting information. They show power-on self-test (POST) failures, port-connectivity p

  • Cisco AVS 3120, 7 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Preface Audience This guide is for the networking or computer technician responsible for installing the Cisco Catalyst Blade Switch 3120 for HP, referred to as the switch module, in the HP c-Class BladeSystem server enclosure, referred to as the HP blade enclosure. We assume that you are familiar with the concepts and terminology of Ethernet and local area networking. If you are interested in more training and education in these areas, learning opportunities including training courses, self-study options, seminars, and c

  • Cisco AVS 3120, 3-3 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 3 Troubleshooting Diagnosing Problems • Verify that you are using the correct cable type. See Appendix B, “Connector and Cable Specifications,” for more information. • Test for loose connections. Sometimes a cable appears to be seated, but is not. Disconnect and then reconnect the cable. SFP Module Port Issues Use only Cisco small form-factor pluggable (SFP) modules on the switch module. Each Cisco module has an internal serial EEPR

  • 1-4 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 1 Product Overview Other Features 10-Gigabit Ethernet Module Slots The 10-Gigabit Ethernet module slots are used for uplink connections to other switches and routers. The module slots operate in full-duplex mode. The CBS3120X uses the hot-swappable Cisco X2 transceiver modules and the

  • Cisco AVS 3120, B-8 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Appendix B Connector and Cable Specifications Cable and Adapter Specifications Identifying a Crossover Cable To identify a crossover cable, compare the two modular ends of the cable. Hold the cable ends side-by-side, with the tab at the back. The wire connected to the pin on the outside of the left plug should be a different color from the wire connected to the pin on the inside of the right plug. (See Figure B-10.) Figure B-10 Identifying a Crossover Cable Console Port Adapter Pinouts Table B-4 lists the pinouts for the console port, the RJ-45-to-DB-9 adapter cabl

  • Cisco AVS 3120, 1-10 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 1 Product Overview Management Options Using the Command-Line Interface The switch module CLI is based on Cisco IOS software and enhanced to support desktop-switching features. You can fully configure and monitor the switch module from the CLI. You can access the CLI either by connecting your management station directly to the switch module console port or by using Telnet from a remote management station. Refer to the switch module command reference on Cisco.com for more information. For quick setup instructions that use the CLI, go to Appendix C, “Configuring the Swit

  • Index IN-4 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 R recommended configurations for stacking 14 requirements for installing the switch module 3 RJ-45 connector, console port 4 S safety and handling guidelines 3 safety warnings 2 serial number location 6 SFP modules bale-clasp latch removal 21 cables

  • Cisco AVS 3120, 2-18 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 2 Switch Installation Installing Devices in the 10-Gigabit Ethernet Slots Caution To prevent ESD damage, follow your normal board and component handling procedures when connecting cables to the switch and other devices. Installing X2 Transceiver Modules and Cisco Converter Modules These sections describe how to install and remove X2 transceiver modules and the converter modules in the switch module 10-Gigabit Ethernet module slots. Note Do not remove the dust cover from the converter module until you

  • Cisco AVS 3120, 2-4 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 2 Switch Installation Preparing for Installation Verifying Package Contents Carefully remove the contents from the shipping container, and look at each item for damage. If any item is missing or damaged, contact your Cisco representative or reseller for support. Return all packing material to the shipping container, and save it. These items ship with your switch module. The Cisco TwinGig Converter Modules with installed protective dus

  • Cisco AVS 3120, C-6 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Accessing the CLI Through the Console Port ! interface Vlan1 no shutdown ip address 10.0.0.1 255.255.255.0 ! interface GigabitEthernet0/1 ! interface GigabitEthernet0/2 . . . (output truncated) interface GigabitEthernet0/16 ! end Step 10 These choices appear: [0] Go to the IOS command prompt without saving this config. [1] Return back to the setup without saving this config. [2] Save this configuration to nvram and exit. If you want to save the configuration and use it th

  • Cisco AVS 3120, 1-8 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 1 Product Overview Management Options LED Behavior in Stack Mode Whether an X2 module or a converter module is installed in the 10-Gigabit Ethernet module slots, the two bottom LEDs (21 and 22) show the status of the StackWise Plus ports 1 and 2, respectively. The top two LEDs (19 and 20) are off when in stack mode. Table 1-7 describes the LED colors in stack mode and their meanings. StackWise Plus Ports The switch module ships with a 1-meter StackWise cable that you can use to connect the StackWise Plus ports. C

  • Cisco AVS 3120, 2-13 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 2 Switch Installation Planning and Creating a Switch Stack Step 5 At the prompt, press Return. Step 6 Enter end. Step 7 Enter copy running-configuration startup-configuration to save this setting. Step 8 At the prompt, press Return. Step 9 To verify that this switch is set as the switch master, enter the show switch user EXEC command. For more information about creating switch stacks, see the “Planning and Creating a Switch Stack” section on page 2-13. Refreshing the PC IP Address After you complete Express Setup, you should refresh the PC IP address: • F

  • Cisco AVS 3120, 1-3 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 1 Product Overview Other Features The switch module is powered from the blade enclosure backplane, and temperature management is provided by the blade enclosure. There is no fan on the switch module. See the software configuration guide for examples showing how you might deploy the switch module in your network. Other Features These sections describe other switch module features: • Switch Module Console Port, page 1-3 • 10/100/1000 Ports, page 1-3 • 10-Gigabit Ether

  • Cisco AVS 3120, B-9 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Appendix B Connector and Cable Specifications Cable and Adapter Specifications Ta b l e B-5 Console Port Signaling Using a DB-25 Adapter Switch Console Port (DTE) RJ-45-to-DB-25 Terminal Adapter Console Device Signal DB-25 Pin Signal RTS 5 CTS DTR 6 DSR TxD 3 RxD GND 7 GND GND 7 GND RxD 2 TxD DSR 20 DTR CTS 4 RTS

  • Cisco AVS 3120, 2-23 Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide OL-12246-01 Chapter 2 Switch Installation Planning 10/100/1000 Ethernet Port Connections Note You can use the mdix auto interface configuration command in the CLI to enable the automatic medium-dependent interface crossover (auto-MDIX) feature. When the auto-MDIX feature is enabled, the switch module detects the required cable type for copper Ethernet connections and configures the interfaces accordingly. Therefore, you can use either a crossover or a straight-through cable for connections to a copper 10/100/1000 module port on the switch m

Related Products and Documents (Switch):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 MB QUART RSC 213 Installation instructions mb-quart/rsc-213-9H9.pdf 21 Dec 2023 4
2 ProForm 775s Bike Operation & user’s manual proform/775s-bike-79X.pdf 16 Aug 2022 14
3 innovair -ASL-JEC 18 SEER Installation instructions manual innovair/asl-jec-18-seer-U75.pdf 14 Feb 2024 56
4 Thermador VCIB36JP Service manual thermador/vcib36jp-36N.pdf 27 Mar 2023 16
5 Bogen A2 Brochure bogen/a2-545.pdf 29 Mar 2023 5 0.63 Mb
6 Olivetti JP101 Application notes olivetti/jp101-95C.pdf 26 Nov 2023 6

Similar Resources:

  • MTX

    ABUS-HUB4X8

    (4 pages)
    A-BUS by MTX AUDIO products purchased in the United States from an authorized MTX dealer are guaranteed against defects in material and workmanship for a period of two years from the date purchased by the end user, and limited to the original retail purchaser of the product. Product found to be defective during that period will be repaired or replaced by MTX …
  • Panasonic

    Switch-S24GPWR

    (19 pages)
    Installation Guide Thank you for purchasing our product. This document provides important information about safe and proper operations of this Switching Hub. Please read the "Important Safety Instructions" on pages from 3 to 5. Any problems or damage resulting from disassembly of this Switching Hub by customers are not covered by the wa …
  • NETGEAR

    ProSAFE GS105PE

    (2 pages)
    Installation Guide5-Port Gigabit Ethernet PD-Powered/PoE Pass-thru Smart Managed Plus SwitchModel GS105PEPackage Contents• Switch model GS105PE• Wall mount kit• Installation guideEthernet cables not included.1. Register With the NETGEAR Insight AppUse the NETGEAR Insight app to register your switch, activate your warranty, and access support.1. On …
  • Linksys

    PAP2

    (17 pages)
    csdata brasil Ltda. / Tel. +55 81 3422 1714 / Fax. +55 81 3422 1984 / VoIP 2031 Web: www.linhagratuita.com.br / E-Mail: [email protected] / CNPJ: 07.196.259/0001-07 User Manual Linksys PAP2 Broadband Phone Service Linhagratuita grupo csdata www.linhagratuita.com.br …
  • Siemens

    3WN6

    (2 pages)
    1Lichtbogenkammern austauschen 3WY3611-0.A00Arc chute replacementRemplacement des chambres de soufflageSustitución de las cámaras apagachispasSostituzione camera dell'arcoByte av ljusbågekammare3WN63WN6Betriebsanleitung/Operating Instructions Bestell-Nr./Order No.: 3ZX1812-0WY36-0AA0 / 9239 9791 422Gefährliche Spannung!Vor Beginn der Arbeiten Gerät …
  • Cisco

    MGX 8950

    (12 pages)
    xvCisco MGX 8950 Hardware Installation GuideRelease 2.1, Part Number 78-11273-01 Rev. B0, March 2002About this GuideThis preface describes the objectives, audience, organization, and conventions of theCisco MGX 8950 Hardware Installation Guide.ObjectivesThis publication provides descriptions for installing the following MGX 8950 hardware:• Enclosures• Po …

Comments, Questions and Opinions: