Manualios.com

RNG KIT-STCS60D Owner's Manual

RNG KIT-STCS60D Manual Online:

4.2, 2615 votes
RNG KIT-STCS60D User Manual
RNG KIT-STCS60D User Guide
RNG KIT-STCS60D Online Manual

Text of RNG KIT-STCS60D User Guide:

  • 1 Product Description The Renogy Solar Suitcases combine highly efficient Renogy Solar Panels and a fully adjustable 10 Amp PWM Fully Adjustable Solar Charge Controller with LCD Screen to create an easy-to-use, ‘plug and play’ system. This system is specifically designed for mobile off-grid applications, where space and weight limita

  • RNG KIT-STCS60D, 2 Components Also included but not depicted: Storage Case 10A PWM ViewStar LCD Charge Controller Junction box Fuse Holder with 7.5A mini fuse Battery Alligator Clips MC4 Connectors Handle Tilting Stands 15 ft. Tray Cable Latch Aluminum frame with corner protection MC4 Connectors Latch

  • RNG KIT-STCS60D, 3 Installation 1. Unclip the two latches on the side of the unit and unfold the two panels outward. Extend the stands to support the solar panels. 2. The controller is mounted on metal plate. The plate is attached to the back of the panel with Velcro. The hinges attached to the metal plate allow the user to swivel the charge controller to get a better look at the LCD display. The Velcro allows the re-attachment of the charge controller back under the panel.

  • RNG KIT-STCS60D, 4 3. Fully extend battery leads. Connect the red alligator clip to the positive (+) battery terminal and the black alligator clip to the negative (-) battery terminal on a 12V battery. Ensure that the connections are secure. Note: The kit should be connected to a battery generating at least 9V to start the charge controller. If the 12V battery is fully discharged, charge it for a short period of time by other means to reach 9V. 4. When you connect the kit to the battery, the charge controller will display a boot up message as follows: Black Red WELCOME VERSI

  • RNG KIT-STCS60D, 5 5. Adjusting Battery Size and Type: Press to enter to the options, press or to navigate to the menu options. When the inverse cursor rests on 5. Rated Value, press to enter into the nominal parameter interface. Once again, press or to move between the adjustable parameters. Pressing will move the inverse cursor to the right. While pressing will move it to the left. If the inverse cursor is at the very beginning, press to jump back to the main menu screen. When the i

  • 6 Settings can be saved by pressing until the last adjustable parameter is reached, in this case will be the Battery Type. Press or to choose between Save or Cancel. The inverse cursor will rest on the selected option. Press to confirm the selection. If the Save option is chosen, then the parameters will be saved. If Cancel was chosen, then parameters won’t

  • 7 6. Find a clear sunlit area, free from overhanging tree branches, obstructions or shading. The panel should be facing south, and the tilting angle should be adjusted as follows: Note: To maximize the output, adjust the position of the kit regularly to track the sun movement throughout the day 7. Remote Temperature Sensor (optional): The charge controller (ViewStar) has a b

  • RNG KIT-STCS60D, 8 Charge Controller LEDs Charging Indicator The green LED indicator will turn on whenever sunlight is available for battery charging. Under normal charging conditions, the green charging LED will stay on at all times. Color Indication Operating State Green On solid Charging Table 1 Charging LED indicators Fault Indicator When the following cases occur the fault indicator will be flashing red: Solar module  Over-current  Error while trying to measure the voltage  Reverse-protection MOS-I short

  • RNG KIT-STCS60D, 9 Battery  Over-voltage  Error while trying to measure the voltage  The temperature is above range (battery too hot) Load  Over load  Short  Discharging MOS Short  Error while trying to measure the voltage Device  Controller is operating too hot For trouble shooting please refer to the charge controller manual (Chapter 5). Color Indication Operating State Red Flashing PV: Over-current, Measure error, MOS-I Short, MOS-C Short or MOS Break BATT: Over-voltage, Measure error or Running too hot LOAD: Over

  • RNG KIT-STCS60D, 10 Frequently Asked Questions Q. What type of batteries can be used with this kit? A. Any sealed lead acid, gel, or flooded 12V battery (typically used in caravans, motorhomes, boats etc.) is appropriate for use with this kit. Q. Can this kit charge a 24V battery? A. No, because this kit is designed to charge a 12V battery. Technically, it’s possible to change solar panel connections to enable the kit to work in 24V mode; however, a qualified, knowledgeable individual should only do this. Note: unau

  • RNG KIT-STCS60D, 11 Troubleshooting  Check all connections to ensure they are secure and clean  Check polarity of the battery connection and make sure the battery generates at least 9V  Ensure the solar panels are exposed to sufficient light – ideally position them to face the sun directly  For more information refer to the Troubleshooting section of the Solar Controller Manual (skip anything which relates to load work in the controller manual as the load terminals of the controller are not used) Specifications Solar P

  • RNG KIT-STCS60D, 12 Charge Controller Description Parameter Nominal System Voltage 12VDC Rated Charge Current 10A Rated Discharge Current 10A Maximum Battery Voltage 32V Max. Solar Input Voltage* 48VDC Max. PV Input Power 120W (12V) Self-consumption** ≤18mA Charge Circuit Voltage Drop ≤ 0.24V Discharge Circuit Voltage Drop ≤ 0.15V Communication TTL232 / 8 pin RJ45 Remote Temperature Sensor 2ERJ-3.81 Ground Negative ground Battery Type Gel, Sealed (AGM), and Flooded Table 4 Electrical Parameters *Array voltage should never exceed maximum PV input voltage. Refer to the solar

  • RNG KIT-STCS60D, 13 Boost Voltage Default 14.2V; x2/24V 14.4V; x2/24V 14.6V; x2/24V Max 15V; x2/24V 15V; x2/24V 15V; x2/24V Min 13.8V; x2/24V 13.8V; x2/24V 13.8V; x2/24V Float Voltage Default 13.8V; x2/24V 13.8V; x2/24V 13.8V; x2/24V Max 14.2V; x2/24V 14.2V; x2/24V 14.2V; x2/24V Min 13.2V; x2/24V 13.2V; x2/24V 13.2V; x2/24V Boost Return Voltage Default 13.2V; x2/24V 13.2V; x2/24V 13.2V; x2/24V Max 13.5V; x2/24V 13.5V; x2/24V 13.5V; x2/24V Min 12.7V; x2/24V 12.7V; x2/24V 12.7V; x2/24V Low

  • RNG KIT-STCS60D, 14 Temperature Compensation Description Parameter Temperature Compensation Coefficient (TEMPCO)* Default -3mV/°C/2V (25°C ref) Max 0mV/°C/2V Min -9mV/°C/2V Table 7 Temperature Compensation *Compensation of equalize, boost, float and low voltage disconnect voltage Environmental Parameters Environmental Parameter Working Temperature Range -35 °C to +55 °C (-31 °F to +131 °F) Storage Temperature Range -35 °C to +80 °C (-31 °F to +176 °F) Enclosure IP30 Table 8 Environmental Parameters Mechanical Parameters Mechanical Parameter

More Instructions:

DOWNLOAD

Related Products and Documents (Inverter):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Planet GSD-1603 Operation & user’s manual planet/gsd-1603-GYL.pdf 03 Oct 2023 2
2 Nextar N3-510 Instruction manual nextar/n3-510-1UH.pdf 27 Nov 2023 12
3 Philips HD 4432 Operating instructions manual philips/hd-4432-829.pdf 30 Jun 2023 68 0.95 Mb
4 GE PROGRAMMABLE THERMOSTAT Operating instructions manual ge/programmable-thermostat-3X2.pdf 10 Mar 2023 24
5 Premier Mounts RTM Series Installation instructions manual premier-mounts/rtm-series-D4I.pdf 17 Feb 2024 7
6 Netis WF2501 Operation & user’s manual netis/wf2501-8B4.pdf 19 Sep 2023 62

Similar Resources:

  • Renogy

    100W

    (10 pages)
    1 Solar Suitcase Renogy 100W Solar Suitcase Manual w/o CC Manual 2775 E. Philadelphia St., Ontario, CA 91761 1-800-330-8678 …
  • Tripp Lite

    APS1524

    (4 pages)
    Tripp Lite1111 West 35th StreetChicago, IL 60609 USATelephone: +(773) 869 1234E-mail: [email protected] Number: APS1524PowerVerter APS Inverter/Charger - Reliable Power Source for Uninterruptible Emergency Backup Applications Highlights24V DC input; 120V AC outputHardwired1500 watts continuous output3000 watts peak output for an extended periodAd …
  • Invertek Drives

    Eco Optidrive Series

    (52 pages)
    AC Variable Speed Drives 0.75 - 250kW / 1HP - 350HP 200-600V 1 / 3 Phase InputInstallation and Operating Instructions User Guide Microlectra bv. www.microlectra.nl [email protected]
  • Sharp

    SRS Mounting System

    (42 pages)
    Solar Power SystemInstallation ManualSHARP ELECTRONICS CORPORATIONSOLAR ENERGY SOLUTIONS GROUP • 5901 BOLSA AVENUE • HUNTINGTON BEACH, CALIFORNIA 92647SRS Mounting SystemRectangular Modules …
  • Danfoss

    VLT Micro Drive FC 51 Series

    (83 pages)
    Contents1. Safety3Safety Instructions 3Approvals 3General Warning 3Avoid unintended Start 4Before Commencing Repair Work 52. Introduction7Type Code 73. Programming9How to Programme 9Programming with MCT-10 9Programming with LCP 11 or LCP 12 9Status Menu 11Quick Menu 11Main Menu 124. Parameter Descriptions13Parameter group 0: Operation/Display 13Parameter Gro …
  • Immergas

    ARES PRO 150

    (48 pages)
    ARES PRO 150ARES PRO 230ARES PRO 300ARES PRO 348ARES PRO 400ARES PRO 500 ARES PRO 600High condensate water storage generatorIEInstructions and recommendationsInstallerMaintenance technician*1.042023ENG*STD.005480/000STD.005480/000 …

Comments, Questions and Opinions: