Manualios.com

Audiovox PRO-9342FT3WOS2 Owner's Manual

Audiovox PRO-9342FT3WOS2 Manual Online:

3.85, 2919 votes
Audiovox PRO-9342FT3WOS2 User Manual
Audiovox PRO-9342FT3WOS2 User Guide
Audiovox PRO-9342FT3WOS2 Online Manual

Text of Audiovox PRO-9342FT3WOS2 User Guide:

  • Audiovox PRO-9342FT3WOS2, Model PRO-9342FT3WOS2 Owner's Manual FEATURES: w 2 Three Button Programmable RF Transmitters w Three Channel Receiver (capable of accepting 4 transmitters) w Anti-scan Technology w Remote Panic in all modes w Protected Valet w 7 Function LED - Arm / Disarm / Zone 1 / Zone 2 / Zone 3 / Valet / Arming w Intrusion Alert with Memory w Audible Arm / Disarm / Defective Zone / Tamper Confirmation w Instant Siren Activation (Optional) w Low Current Horn Output w True Last Door Arming (hardwire only) w Defective Zone By-Pass w Starter Disable w Hardwire or Voltage Sense Selectable w Active or Passive Arming Selectable w Programmable Auto Lock On /

  • Audiovox PRO-9342FT3WOS2, ARMING THE SYSTEM - ACTIVE 1. Turn off the engine, exit the vehicle and close all doors, hood lid, and trunk lid. 2. Press and release the Arm / Lock button on the keychain transmitter. þ Red dash mounted LED begins to flash slowly. þ Parking Lights flash one time. þ Siren and / or Horn sounds one chirp. If the siren sounds 3 chirps, then you have left a door, trunk, or the hood lid ajar. Simply close the opened entry point to provide full protection. If the Horn/Siren did not sound when arming, then the chirps have been turned off and you should refer to the sect

  • Page 3 sound. The alarm will continue to sound for 30 seconds, then stop and continue to monitor all protected entry points. If the thief left a door opened, the alarm will sound for six 30 second cycles, remain armed and ignore that triggered zone. þ Whenever the system is armed, the red dash mounted LED indicator will slowly flash. This serves as a visual deterrent to th

  • Audiovox PRO-9342FT3WOS2, Page 4 Open any door to suspend the automatic arming. þ Parking Lights flash two times. If the parking lights flashed three times, then the alarm was triggered in your absence. Before turning the key on, examine the LED to identify which zone was triggered. þ Horn/Siren does not sound. If the siren and or horn sounds 4 chirps, then the alarm was triggered in your absence. Before turning the key on, examine the LED and refer to the INTRUSION WARNING SIGNALS section of this manual to identify which zone was triggered. o Doors Unlock - Optional WHILE THE SYSTEM IS SOUNDING If during a triggered state, you wish to shut off the horn

  • Page 5 3. To return to normal operation, press and release the pushbutton switch any time the ignition is on. NOTE : Always remember to return the system to the NON VALET mode after servicing to ensure that the vehicle remains protected at all times. MANUALLY OVERRIDING YOUR SYSTEM: USING THE VALET SWITCH MANUAL OVERRIDE Your Security System can be disarmed without the use o

  • Audiovox PRO-9342FT3WOS2, Page 6 NOTE: If 15 seconds of inactivity expire or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last successfully stored code. Custom Code Programming Example: To Change the code from the factory pre-assigned code of 11 to “52” you would do the following: 1. Disarm the system by use of the transmitter, or by use of the emergency override sequence. 2. Turn the ignition switch to the on position. 3. Within 10 seconds, press and release the valet/override switch, 3 times. 4. Within 10 seconds turn the ignition switch off, on, off, o

  • Audiovox PRO-9342FT3WOS2, ELIMINATING THE NORMAL ARM / DISARM CHIRPS As explained earlier in the manual, you can eliminate the chirps selectively any time you arm or disarm the system simply by holding the ARM / DISARM button for two seconds. If you find the normal arming and disarming chirps annoying, they can be turned off permanently, eliminating the need to hold the ARM / DISARM button for two seconds. To do this, 1. With the valet switch in the off position, turn the ignition key on then off. 2. Within 10 seconds, press and release the valet pushbutton switch three times. 3. If the chirps were on before you started, then you will hear 2 chirps

  • Audiovox PRO-9342FT3WOS2, DASH LED INDICATORS RAPID FLASHING = PASSIVE ARMING SLOW FLASHING = ARMED OFF = DISARMED ON SOLID = VALET MODE 3 FLASH...PAUSE = INTRUSION ZONE 3 2 FLASH...PAUSE = INTRUSION ZONE 2 1 FLASH...PAUSE = INTRUSION ZONE 1 SIREN CHIRP INDICATORS 1 CHIRP * = ARM 2 CHIRPS * = DISARM 3 CHIRPS = ARM / DOOR OPENED 4 CHIRPS = DISARM / INTRUSION * These chirps are optional, and can be de - activated. PARKING LAMPS 1 FLASH = ARM 2 FLASHES = DISARM 3 FLASHES = DISARM / INTRUSION Your System Has These Features Activated o Single Stage Shock Sensor o Du

Related Products and Documents (Security System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 RCF ES 3080 Operation & user’s manual rcf/es-3080-YNG.pdf 05 Aug 2022 32
2 GE NX-148E - Security NetworX LCD Keypad Operation & user’s manual ge/nx-148e-security-networx-lcd-keypad-677.pdf 03 Jan 2023 32 0.97 Mb
3 NETGEAR DGN1000 - Wireless-N Router With Built-in DSL Modem Datasheet netgear/dgn1000-wireless-n-router-with-built-in-dsl-modem-17X.pdf 02 Dec 2022 2
4 Sim2 mico50 User and installation manual sim2/mico50-LKY.pdf 09 Jun 2023 277
5 Tripp Lite DB25-ALL Specifications tripp-lite/db25-all-415.pdf 06 Apr 2023 2 0.49 Mb
6 SIIG Smart Controller for HDMI over IP Series Operation & user’s manual siig/smart-controller-for-hdmi-over-ip-series-Y28.pdf 10 Jun 2023 18

Similar Resources:

  • HP

    TippingPoint Series

    (40 pages)
    *5998-2868* 5998-2868HP TippingPointTippingPoint 10/110/330 Hardware Installation and Safety GuideAbstractThis document describes safety guidelines and procedures for hardware installation for the TippingPoint 10, TippingPoint 110, and TippingPoint 330. Part number: 5998-2868Edition: October 2013 …
  • Mighty Module

    MM1520

    (2 pages)
    MM1520, 1521 and 1524STRAIN GAUGE INPUTDUAL LIMIT ALARMSDESCRIPTIONThe MM1520 Series Strain Gauge input alarmsmonitor a DC input signal from a strain gaugeor bridge and provide dual setpoint alarmoutputs when the input exceeds the alarmvalues. Each unit can be supplied as a HI/HI,HI/LO or LO/LO alarm. The output relays arenormally de-energized, and e …
  • Paradox

    NVX80

    (4 pages)
    NVX80 V1.07 Installation Quick StartImportant: Keep a 20 mm/0.80 in clearance from the top of the unit’s plastic casing to the ceiling or object placed above the unit. LegendL – LevelW1 – Wall installationW2 – Wall Tamper InstallationC1 – Corner-Mount InstallationC2 – Corner-Mount Tamper Installation Installation Steps1. Loosen the tamper screw …
  • Winnebago

    SunCruiser

    (141 pages)
    TABLE OF CONTENTS5 - DASH / AUTORev. 0715090608 June 2009 Part No. 132000-15-007Copyright 2006 Winnebago Industries, Inc. All rights reserved.INTRODUCTION 1About this Manual ............................................................................................................................ 1-1Safety Messages Used in this Manual ..................... …
  • System Sensor

    L Series

    (4 pages)
    1 I56-6649-000 2/24/2020GENERAL DESCRIPTIONThe L-Series low frequency series of notification appliances offers a range of low frequency sounder and low frequency sounder/strobe products for wall and ceiling applications. Studies have shown that low frequency audible devices that operate around 520Hz are more effective in waking individuals in sleeping …
  • Pima

    Captain 6

    (16 pages)
    CAPTAIN 6 6 Zones Intruder Alarm System USER GUIDE System ver. 6.0 PIMA Electronic Systems Ltd. www.pima-alarms.com P/N 4410049, G2 XX en, Jan. 2010 …

Comments, Questions and Opinions: