Manualios.com

Autopage NG?100 “Night Guard” Installation And User Manual

  • NG?100 “Night Guard” Security System
  • ma1EwDwlg1FKI
  • Installation And User Manual
  • PDF / Adobe Acrobat Reader
  • 24

Autopage NG?100 “Night Guard” Manual Online:

4.4, 1692 votes
Autopage NG?100 “Night Guard” User Manual
Autopage NG?100 “Night Guard” User Guide
Autopage NG?100 “Night Guard” Online Manual

Text of Autopage NG?100 “Night Guard” User Guide:

  • Autopage NG?100 “Night Guard”, 1   NG‐100“NightGuard”ByAPInc. HomeSecurityMonitoringSystem ForMicrosoftWindows  InstallationandUsersmanual Read all instructions before proceeding with the installation              • DayandNightSecurityCamera • ThreePassiveInfraRedSensorsforTrackingMovement • Rotates210DegreesfollowingMovement • ClearPicturewith2.4GHz.DigitalTransmissionwithExtendedRange • DigitalTransmissionTechnologyusingFrequencyHoppingforSecureTran

  • Autopage NG?100 “Night Guard”, 2    Table of Contents:  A) Contentsofbox Page a. Partslist2 b. Manuals2 c. DiscContent(driversandinstallprogram)2 d. OperatingSystems2 B) Warnings a. Professionalinstallrecommended3 b. Locallawsandordinances4 c. PowerOFFconsiderations4 C) S

  • 3    AllDimensionsinMillimeters                      WARNINGS:  ThoughtheNightGuardisnohardertoinstallthananyoutdoorreplacementlamptherearesome thingsthatneedtobeconsideredbeforeattemptingtoinst

  • Autopage NG?100 “Night Guard”, 4   Local Laws:  Pleasecheckforlocallawsorordinancesinyourareathatmayrequireextrastepsorspecialpermits tobegrantedbeforeyouinstallthisproduct.Manyareashavespecificlawsorrequirementsforthe replacementoradditionofnewlightingfixtures.  Power OFF Considerations:  Thefirstandmostimportantstepissafety.Youshouldalwaysmakesure thepowertotheelectricalboxyouareworkingonisturnedOFF.Do�

  • Autopage NG?100 “Night Guard”, 5  Installation In Existing Location:  ThissectionwillcovertheinstallationoftheNightGuardwithanexistingelectricalbox.Thisshould beusedifyouarereplacingyourcurrentexteriorlightwiththeNG‐100NightGuardsystem.  • PleaserefertothepriorpagetoinsurethatthepowerhasbeenturnedOFFandtheelectrical boxissafetoworkon.  Considerations: �

  • Autopage NG?100 “Night Guard”, 6   Existing Fixture Removal:   TOOLS & MATERIALS  In the following text you will learn the basic steps to install a light fixture. For this example we will assume that you are replacing an existing light fixture. Tools you may need include the following: a ladder, Phillips screwdriver, flat or slotted screwdriver, razor knife or box cutter, electrical tape, voltage tester, and some wire nuts. The first and most important step is safety. You should

  • Autopage NG?100 “Night Guard”, 7  being careful not to touch the bare end of the wires or allowing them to touch each other. The old light fixture should be free of the outlet box and can be discarded. You are now ready to install your sensor light. Remove the fixture from its packaging and lay the contents out in an orderly fashion.    INSTALLING THE BULB   Unscrew the lamp cover of the Light and install a 150W J-type lamp included.  Use gloves or a cloth towel and DO NOT touch

  • Autopage NG?100 “Night Guard”, 8  IMPORTANT: IT IS RECOMMENDED THAT THE INSTALLATION OF THIS SYSTEM MUST BE DONE BY A QUALIFIED ELECTRICIAN.  o The sensor light must be grounded. o Do not mount the lighting head against any flammable surfaces. o The motion detector will not operate correctly if it is installed: • Near the outlet of a central heating boiler • Near air conditioning. • Pointing directly at moving vehicles • Within sight of reflection from moving water • Where other lamps could shine onto the detector NOTE: This high

  • Autopage NG?100 “Night Guard”, 9  Using new supplied wire nuts connect the black wire of the fixture to the black or wire of the electrical box, the white wire to the white wire and the green ground wire to the green ground or bare wire. Before attaching the light fixture to the electrical box inspect the wires making sure there is not any bare spots showing that could short out. If you notice one take the electrical tape mentioned earlier and apply some to the wire. Carefully tuck the wires back into the wall box and attach fixture to box/bracket. Turn the appropriate breaker back ON and hit the

  • Autopage NG?100 “Night Guard”, 10     SENSOR LIGHT OPERATION:    o In night time operation the light will switch ON for 60 seconds and off automatically when heat/ movement is detected. o The factory default mode is “Auto mode”, the light only works at night, the camera works always. o To change mode to night time only, (Auto mode), push the button at the bottom of the housing and the hidden LED indicator will turn off in this mode. The light will be on for 60 seconds when detecting any movement at night.

  • Autopage NG?100 “Night Guard”, 11  LAMP REPLACEMENT First insure the power has been turned OFF at the main breaker. Allow bulb to cool before attempting to remove it. Unscrew the lamp cover and take the old lamp out and replace with new one. Always use gloves or a cloth rag to insert the new bulb as oils from your skin will cause the bulb to burn out prematurely. Close the lamp cover and tighten the screws. See bulb replacement at the end of this manual. WARNING: This fitting will become hot when in use. Allow bulb to cool before touching. NOTE:THEINTELLIGENTMOTIONSENSORTRACKINGLIGHT�

  • Autopage NG?100 “Night Guard”, 12   InstallingNightGuardSoftwareonyourcomputer   Insert the provided Night Guard CD-ROM into your computer.  Chose the software folder  Begin the install process by clicking the EXE file. 

  • 13  Fig.4 Fig.3  Follow the instructions on the installation screen ¾ Click the EXE file to begin (fig. 1)→ Next Fig. 2)→ Next (Fig. 3)→ Install (Fig. 4)→ Next (Fig. 5)→ Install this devise driver (Fig. 6) → Click Finish (Fig. 7)→ Finish Restart windows. If your computer doesn’t run the installation program au

  • Autopage NG?100 “Night Guard”, 14                                    Once your system has restarted you will need to choose the USB slot the receiver will remain in. This will determine the USB address for the devise. This cannot be changed at a later time unless the software is reinstalled. Please use the same USB slot when running the Night Guard system.  Plug in the USB receiver and wait for the confirmation

  • Autopage NG?100 “Night Guard”, 15      Correct Installation: No exclamation point. Your installation has been completed successfully.                          Incorrect Driver Installation:                      

  • Autopage NG?100 “Night Guard”, 16    If there is an exclamation point next to the “digital Wireless camera”, please do the following. 1. Select digital Wireless Camera and right click with your mouse. 2. Select properties. 3. Reinstall Driver 4. Select Search automatically or select install from a specific location. Please select your CD drive and then select the Drivers folder. The correct driver is the mr8980.sys located in the driver’s folder of the disc. 5. Once found you may get a warnin

  • Autopage NG?100 “Night Guard”, 17  Your computer will continue the installation and the driver should install normally. If the computer does not find the driver, insure the USB receiver in the same slot that it was in when the program was installed. You can also choose to install the driver manually. If this is the case then direct windows to the location where the installation disk is inserted and choose the correct operating system and continue the installation. For technical support Monday – Saturday 8:00- 5:00 PST please call 800-945-2527 and speak with our technical support staff or visit www.nightguardhomesecurity.com Night Guard software operation: If your installat

  • Autopage NG?100 “Night Guard”, 18  Desktop with Icon Night Guard program open Setup and device setup Device set up screen

  • 19  In the device setup screen you will chose the camera you wish to program. Once this is clicked, you will have 10 seconds to synchronize the camera. You should communicate with the person by the camera light to get ready. When the camera Icon is clicked, the person at the light will depress and hold in the DIP switch programming button on th

  • Autopage NG?100 “Night Guard”, 21  A: Single file save. Manually save a file to C:\Video All files saved will be recorded in a folder called C:\video. You can move these files later to any location. Still images recorded with be in JPG format and can be viewed by any picture viewer. All video images will be stored in AVI format and can be viewed in Windows media player. An AVI driver may be necessary to view these film clips. This codec can be downloaded from Microsoft. B: Multi files save. This will record all of the files sa

  • Autopage NG?100 “Night Guard”, 22  J: Detection alert. The background of any triggered sensor will illuminate RED when the sensor is triggered. Sample of Quad View     Bulbreplacement(Halogenlamp150w,Jshorttype,length:78mm,cap:R7s) 1. Turn OFF power at the breaker box. 2. Take-off the water-proof cap and remove screws, frame and glass. 3. Remove the used bulb and set a new one (gloves should be used). 4. Reassemble, screw and cover the water-proof cap. 5. Turn ON power  SPECIFICATIONS:  Detection Method: Passive Infrared Senso

  • Autopage NG?100 “Night Guard”, 23   Please register your product at: www.nightguardhomesecurity.com For technical support Monday through Saturday 8:00-5:00 PST call 800-945-2527 ext: 461 NIGHT GUARD WARRANTY PROVISIONS (U.S.,ContinentalU.S.and CanadaOnly)  1. NightGuard:AP,Inc.WARRANTSthatthisnewunithasbeenthoroughlyinspectedandtestedatthefactorypriorto delivery.Your Night Guard system is warranted for one (1) year to the original purchaser/user of the

Related Products and Documents (Security System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 PSG MAX CADDY PF01102 Installation and operating instructions manual psg/max-caddy-pf01102-4QB.pdf 23 Feb 2023 79
2 SMA SSM-U-2410 Technical information sma/ssm-u-2410-YQ9.pdf 30 Apr 2023 26
3 American DJ Performance Scan 250 User instructions american-dj/performance-scan-250-JDQ.pdf 20 Nov 2022 10 2.04 Mb
4 NSM M 132 Use and maintenance manual nsm/m-132-E5R.pdf 22 Dec 2022 6
5 FOR-A UFH-70DAC Operating manual for-a/ufh-70dac-344.pdf 19 Sep 2023 22
6 PYLE Audio PLVIN60 Instruction manual pyle-audio/plvin60-82M.pdf 19 Nov 2022 4

Similar Resources:

  • GeoVision

    GV-3D

    (15 pages)
    Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.Quick Start GuideGV-3D People Counter V2 3DPCV2-QG-C …
  • Black Widow Security

    BW RAS 400

    (8 pages)
    REMOTE AUTO STARTFOR KEYLESS ENTRY AND ADD-ON REMOTE START MODULESBEFORE INSTALLING THIS PRODUCT PLEASE READTHIS INSTALLATION MANUAL THOROUGHLY!!INSTALLATION MANUALThis remote start product is intended forinstallation on vehicles equipped with automatictransmissions and electronic fuel injection only!DO NOT INSTALL THIS UNIT INTO A MANUALTRANSMISSION VEHICLE …
  • Bellman & Symfon

    BE1270

    (3 pages)
    In the box  BE1350 Classic alarm clock BE1270 Bed shaker Power supply User manualPower and battery Mains power 7.5 V DC / 1.5 A External power supply unit Backup batteries 4 x 1.2 V AAA NiMH rechargeable batteries (not included) Battery backup operating time ~ 24 h when fully charged Battery backup charging time ~ 10 h from f …
  • Whistler

    WIC-3509P

    (24 pages)
    The Whistler Group Corporate Headquarters3604 NW Frontage Rd. • Bentonville, AR 72712Tel 479.273.6012 • Fax 479.273.2927Customer Return Center551 N. 13th St. • Rogers, AR 72756Customer Service Tel 800.531.0004Please read this User Manual carefully before using the product!www.whistlergroup.comVersion No.: 1.0Model No.: WIC-3509PWireless Inspection Came …
  • Lorex

    SHS-4QM22

    (2 pages)
    SHS-4QM SERIES Quick Set-Up Guide R1The SHS System comes with the following components:• Quad Processor• 2 x Weatherproof Color Cameras with Stands • 2 x Weatherproof Color Day/Night IR Cameras with Stands• 4 x 60’ DIN Extension Cables• DIN Video Cable• Remote Control• Power AdapterGetting StartedQUAD SURVEILLANCE SYSTEMWITH 4 CCD INDOOR/OUTD …
  • Networker

    TS790

    (56 pages)
    TS790 / TS900Intruder Alarm Control PanelsUser Manual_~Engineers menu 2Select option :-_~OPEN_~Engineers menu 2Select option :-_~_~OPEN1ADCB2 376548 90ENTESC_~SYSTEM OPEN17:30 Wed 11 NOVSILENTZONEOMITCHIMENEWCODE 24 HrOMITWALKTESTBELLTESTPart SetPartSetPartSetRESET1ABCD2 34 5 67ENT ESC809Sett ing the SystemEnt er your pa ssc ode X XXXth en l eav e th e p ro …

Comments, Questions and Opinions: