Manualios.com

Avixe G400 Operation & User’s Manual

Avixe G400 Manual Online:

3.75, 1713 votes
Avixe G400 User Manual
Avixe G400 User Guide
Avixe G400 Online Manual

Text of Avixe G400 User Guide:

  • Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. 1. WARNING AND CAUTION…………………………………………….………1 2. IMPORTANT SAFETY INSTRUCTION………….……...3 3. FCC STATEMENT………………………………………….……..7 4. CE (EUROPE) ST

  • Avixe G400, 1.WARNING AND CAUTION WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS MONITOR TO RAIN OR MOISTURE. HIGH VOLTAGE EXISTS ON THIS MONITOR. DO NOT REMOVE THE MONITOR’S COVER CAUTION: 1. Keep Monitor away from excessive dust, high temperature, moisture or direct sunlight. 2. Use well-ventilated area and do not cover ventilation openings. 3. Unauthorized modification to this equipment, substitution or the use of an unshielded connecting cable may cause excessive interference. 4. When the monitor is not in use disconnect it from the mains power supply. 5. If the picture display is in any way abnormal, disconnect from mains

  • Avixe G400, 2.IMPORTANT SAFETY INSTRUCTION Prior to using this product, please ensure that you have carefully read and understood all the procedures outlined in this user’s manual. 1. Read all of these instructions. 2. Save these instructions for later use. 3. Follow all warnings and instructions marked on the product. 4. Disconnect from the mains supply before cleaning. Do not use liquid or aerosol cleaners. Use only a slightly damp cloth for cleaning. 5. Do not use this product near water. 6. Do not press hard and scratch the polarizer film on the LCD panel surface. For handling,

  • Avixe G400, 8. Slots and openings in the cabinet located at the back and underneath are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked as when placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in an enclosed installation unless proper ventilation i

  • Avixe G400, technician to restore the product to normal operation. E If the product has been dropped or the cabinet has been damaged. F If the product exhibits a distinct change in performance, indicating a need for service. 15. To prevent reflection of the light, set the LCD panel perpendicular with the light source.

  • Avixe G400, 3.FCC STATEMENT The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in strict accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer

  • 4.CE (EUROPE)STATEMENT 1 Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2 Heben Sie diese Anleitung für den späteren Gebrauch auf. 3 Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4 Umeine Beschädigung des Gerätes zu vermeiden sollten

  • Avixe G400, 17 Wenden Sie sich mit allen Fragen die Service und Reparatur betreffen an Ihren Servicepartner. Somit stellen Sie die Betriebssicherheit des Gerätes sicher. 5.General Information This monitor is a high-performance intelligent multi-scan TFT LCD color monitor. It is designed to be compatible with all display modes for 15”, 17” LCD monitors. User friendly interface---the easy and precise OSD control of 5 keys button. Brief appearance---multimedia featured in an elegant and compact housing. Analog input-plug and play facilities to

  • Model B: PLM Series 1. POWER Press POWER to turn monitor ON/OFF. 2.MENU Show OSD menu. 3. LEFT Press left button to adjust the brightness directly. 4. RIGHT Press right button to adjust the contrast directly. 5. AUTO Auto config or exit OSD menu.

  • Avixe G400, LED Indicates the status of monitor operation. BLUE: Normal Amber: power saving mode. D/C Input: 12V DC Input Terminal RGB IN: Analog signal connector (15-pin D-sub) for use with IBM and other compatible PC AUDIO IN: 3.5mm Stereo Input Jack to receive audio signal from PC. 7.Installation procedure: 1. Ensure the power of PC and LCD monitor are off. 2. Connect the video and audio signal of PC to their respective input terminals on monitor. 3. Connect the power cord to the power supply ad

  • Avixe G400, 8.OPERATION METHOD OF FRONT PANEL CONTROL The Monitor function settings are set using the on-screen display. To access function settings, simply press the MENU keys on the front control panel to display MENU. To make any adjustment: 1. Press (MENU / ENTER) key to show the OSD menu. 2. Select the item in the menu that you wish to adjust by pressing left & right button. 3. Press (MENU/ENTER) key to make this item adjustable. Adjust the item that you selected by pressing left & right button. Press (Menu off/Auto) you could off the OSD me

  • Avixe G400, Adjusts the brightness control. Adjusts the contrast control. Adjusts vertical noise and correct horizontal size. Adjusts horizontal position. Adjusts vertical position. Factory preset 9300/6500 color. Adjusts gain of red color. Adjusts gain of green color. Adjusts gain of blue color. Volume Control. Disable Speaker Output. Reset to original factory Geometry setting. Select the language want to show (English, French, German, Spanish, Italian, Chinese) Important Note on Built-in Speakers The two built-in speakers in the LCD monitor connect directly to

  • Avixe G400, 9.TROUBLE SHOOTING Before calling for service, check the information in this section to see if you can remedy any problems by yourself. If you need assistance, please call the dealer where you purchased the LCD monitor. There is no SCREEN image Please check these items:  The power cord is securely connected the monitor, the adaptor, and wall outlet.  Check the signal cable connection between the monitor and the computer.  Adjust the brightness and contrast controls.  Monitor is in power saving mode, display image is too large or small.  Use the OSD controls to adjust auto setup. The colors are distorted

  • Avixe G400, 10.LCD WALL MOUNT ASSEMBLY GUIDE (LCD MONITOR ARM SHOULD BE PURCHASED) ASSEMBLY GUIDE 1. Remove screws, lids, and foot base, Do not discard any of the parts keep these for future use. (Figure1)

  • Avixe G400, LCD WALL MOUNT ASSEMBLY GUIDE 2. LCD Monitor arm assembly procedure.( see figure 2 ) a. a. using 6mm screwdriver, fix torque at 11 lbt-ft. Fasten (M4*10L) 4 PCS screws to assemble arm and monitor. b. b. Secure two side of LCD monitor arm to fasten properly. Caution: 1. Purchase 75mm*75mm VESA standard interface 2. LCD monitor arm is only for LCD monitor use. Do not hang any other things on the arm. 3. If you are missing any of the parts, Contact the store where you purchase the goods. (Figure 2)

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Adesso NuScan 3000 Programming manual adesso/nuscan-3000-GS2.pdf 29 Oct 2023 34 0.69 Mb
2 Gigabyte Q2440 Operation & user’s manual gigabyte/q2440-8R7.pdf 25 Aug 2023 9 1.67 Mb
3 Xerox DOCUCOLOR 12 Materials usage manual xerox/docucolor-12-591.pdf 13 Dec 2022 58 6.48 Mb
4 ADEMCO Vista-50 Operation & user’s manual ademco/vista-50-411.pdf 25 Nov 2023 66
5 Toshiba C655-S5118 Specifications toshiba/c655-s5118-Y85.pdf 17 Jul 2022 4
6 Sony Dream Machine ICF-C218 Operating instructions sony/dream-machine-icf-c218-FLJ.pdf 31 Jul 2023 2 0.15 Mb

Similar Resources:

  • Mitsubishi Electric

    XD470U

    (5 pages)
    11) InterfaceControlling the projector using a personal computerThis projector can be controlled by connecting a personal computer with RS-232C terminal.PC-controllable functions :•Turning the power ON or OFF• Changing input signals• Inputting commands by pressing the buttons on the control panel and remote control• Menu settingConnectionImportant:� …
  • Omron

    H8PS

    (2 pages)
    Example : ON at 125° and OFF at 180° for Cam 2, step 3Manual ModeSet the mode switch to PRGM modeand MAN mode.Press the ON/OFF key to flushON indication.Select Cam 2 with the CAM keys.Select Step 3 with the STEP keys.Set 125° with the ANGLE keys.Press the WRITE key.Press the ON/OFF key to make theOFF indicator flash.Set 180° with ANGLE keys.Press the …
  • Acnodes

    APM 5084

    (25 pages)
    661 Brea Canyon Rd., Suite 3Walnut, CA 91789tel: 909.598.7388, fax: 909.598.0218© Copyright 2011 Acnodes, Inc.All rights reserved. Product description and product specificationsare subject to change without notice. For latest product information,please visit Acnodes’ web site at www.acnodes.com.APM50848.4” industrial panel mount LCD monitorUser ManualAP …
  • Wacom

    DTK-2400

    (117 pages)
    Installation Guide & Hardware Manual⇎⼂ ಪ⠞ᖆ Ჹ 㘂ᖆ➒♞ ⇎ᬯ⇆ᅝ㺱ᣛफঞ⹀储᠟ݞᅝ㺙ᣛफϢ⹀ӊ᠟ݠDTK-24001URTG[AVKVNGEQNQTKPFF  …
  • Philips

    109F72

    (3 pages)
    PhilipsCRT monitor48 cm (19")real flat SXGA109F72digitalized CRT display for superb computainmentwith lead-free designWith a Digital Deflection CPU, High Bright hot key for brightness control, high resolution SXGA performance, a big screen that displays more and lead-free design, this 109F7 CRT monitor delivers an exciting computainment experience.Out …
  • Philips

    Rear-Projection HDTV Monitor

    (8 pages)
    This section shows you how to make a basic TV connectionusing a cable TV or antenna signal.If you have cable TV service, you’ll simply connect the coaxialcable lead-in from the cable TV company to your TV. If you intendto connect a VHF/UHF antenna, you may need a 300- to 75-ohmadapter, which is not supplied with your TV. NOTE: You should be able to buy opt …

Comments, Questions and Opinions: