Axiohm 7156 Owner's Manual

Text of Axiohm 7156 User Guide:

• Axiohm 7156, Communication 7156 Owner’s Guide October 199566 Switch Settings The DIP switches are located on the PC board behind the front cover as shown in the illustration on page 16. They are used to set the RS-232C parameters as shown in the following illustration and table. These parameters must match those of the host system in order for the host system and the printer to communicate. Note: The switches can also be used for setting other functions and tests. Be careful when setting the switches for the RS-232C settings that you do not accidentally change the settings for the other functions and tests. See

• Axiohm 7156, Setting Up and Using the Printer 7156 Owner’s Guide October 199532 Paper Low Sensor Note: The paper low sensor is not available on 30XX models. See the model number on the machine label on the right side of the printer. The paper low sensor is set at the factory to detect when there are about 4 1/2 meters, +/- 3 meters (15 feet, +/- 10 feet), of receipt paper remaining. The sensor is adjustable to detect less or more paper remaining. It is recommended, however, that the sensor be kept at the factory setting. If the sensor has accidentally been changed, follow thes

• 7156 Owner’s Guide Setting Up and Using the Printer October 1995 13 4. Open the front cover and remove the foam restraint. 5. Remove the cardboard support from the slip table. 6. Remove the ribbon cassette and cables from the box. 7. Save all packing materials for future storing, moving, or shipping the printer. Caution: Be sure that the foam restraint and the ca

• Axiohm 7156, 7156 Functional Specification 189-9102894 new RS232 industry standard commands 02 RFC 17319 02 DR 45426 February 5, 1997 Axiohm IPB company confidential page 6 of 12 9.8.24.3 Enable/disable automatic status back. GS a n Enable/disable automatic status back. format ASCII GS a n Hex 1D 61 n Decimal 29 97 n Enables or disables Auto Status Back (ASB) and specifies the status items to include, using n as follows: Bit Off/On Hex Decimal Status for ASB 0 Off 00 0 Cash drawer status disabled. On 01 1 Cash drawer status enabled. 1 Off 00 0 RS232 Busy status disabled. On 02 2 RS232 Busy status enabled. 2 Off 00 0 Error status disabled. On 04 4 Error status enabled. 3 Off 00 0 Receipt paper ro

• Axiohm 7156, Commands 7156 Owner’s Guide October 1995102 Graphics Commands These commands are used to enter and print graphics data. Set Absolute Starting Position Sets the print starting position for graphics on the receipt station at the specified number of dots from the beginning of the line as expressed in the following formula: n = ((n1 + (256 x n2)) x 2). The resulting dot column must be less than 448. The print starting position is reset to column one after each line. This command emulates the Epson LQ-950™ dot matrix printer. This allows the 7156 to accept graphics that are normally output from word processing programs to a half-dot matrix printer. Hex Decimal

• Axiohm 7156, 7156 Owner’s Guide Commands October 1995 95 Define User-Defined Character Set (Receipt Station) Defines and enters downloaded characters (for the receipt station) into RAM. It may be used to overwrite single characters. The user-defined characters are available until power to the printer is turned off, an Initialize Printer command (1B 40) is received, or a downloaded bit image (1D 2A) is defined. User-defined character sets for both slip and receipt may be used at the same time. The command clears bit image logo data from RAM. See the illustration on the next page

• Axiohm 7156, About the 7156 Printer 7156 Owner’s Guide October 19958 Ordering Forms The 7156 prints on single or multiple forms in the slip station (up to five-part forms). Forms and slips must meet the following requirements: • Front insertion (minimum): 51 mm (2.0 in.) wide 70 mm (2.75 in.) long • Side insertion (minimum): 203 mm (8.0 in.) wide 51 mm (2.0 in.) long • Single-ply forms should be on paper that is greater than 15 pounds • Multiple-part forms (up to five parts) should be no thicker than .406 mm (.016 in) Contact your sales representative to order forms or you may order forms from AT&T Global In

• Axiohm 7156, Appendix A: Specifications 7156 Owner’s Guide October 1995136 Power Requirements The 7156 printer receives power from a separate power supply. Here are the voltage requirements for the power supply. Maximum Current Voltage Station Short Term Long Term 24.0 V +/- 10% Slip 4.6 Amps 2.0 Amps Receipt 6.5 Amps 2.0 Amps When connected with a remote 2x20 pass- through display. Environmental Conditions Operating Temperature 5°C to 45°C (40°F to 112°F), models with knife 5°C to 50°C (40°F to 120°F), models with no knife Operating Humidity 5% to 90% Condensation may occur when equipment is transferred from cold to warm areas after sh

• Axiohm 7156, Commands 7156 Owner’s Guide October 199574 Printer Status Commands These commands send printer status information to the host system and are listed in numerical order of their Hex codes. Printer Status Commands Hex Code Command Page 1B 75 0 Transmit Cash Drawer Status 107 1B 76 Transmit Printer Status 108 Real Time Commands These commands correct difficulties with the original version of the 7156 RS-232C communication interface. Real Time Commands Hex Code Command Page 1D 04 n Real Time Status Transmission, GS Sequence 111 10 04 n Real Time Status Transmission, DLE Sequence 112 1D 03 n Real Time Request t

• 7156 Owner’s Guide Commands October 1995 123 MICR Reader Commands These commands control the Magnetic Ink Character Recognition (MICR) Reader, including how it parses the character strings on checks. The remainder of this chapter explains these commands. The section that follows, “MICR Parsing,” describes how to create a parsing format and how to create and maintain an ex

• Axiohm 7156, 7156 Owner’s Guide About the 7156 Printer October 1995 5 Ordering Paper and Supplies Thermal receipt paper, ribbon cassettes, and forms can be ordered from several recommended and qualified suppliers. Ordering Thermal Receipt Paper The 7156 requires “fax grade” thermal paper with the following dimensions: • Diameter: 80 mm maximum (3.15 in.) • Length: 83 meters (273 ft.) • Width: 80 mm +/- .5 mm (3.15 +/- .008 in.) The paper must not be attached at the core. Otherwise the receipt station will be damaged when the paper is exhausted. The paper low LED will blink when there are about 4 1/2 meters (15 feet) of paper left. If the paper runs out, th

• 7156 Owner’s Guide Appendix A: Specifications October 1995 137 Reliability The numbers in the table refer to the Mean Cycle Between Failure (MCBF) for the items indicated. Thermal Receipt Printer 36 Million Print Lines Impact Slip Printer 15 Million Print Lines Impact Printhead 200 Million Characters Electronics 240,000 Ontime Hours Knife 1 Million Cuts MICR Reader 200,000 Reads Ribbon

• Axiohm 7156, 7156 Owner’s Guide Commands October 1995 87 Set Relative Starting Position Moves the print starting position the specified number of dots either right (up to the right margin) or left (up to the left margin) of the current position. The print starting position is reset to the first column after each line. Hex Decimal ASCII Value of n 1B 5C n1 n2 27 92 n1 n2 ESC \ n1 n2 See Examples Below To Move the Relative Starting Position Right of the Current Position n = Number of dots to be moved right of the current position n1 = Remainder after dividing n by 256 n2 = Integer after dividing n by 256 The values for n1 and n2 are two bytes in low byte,

• Axiohm 7156, 7156 Owner’s Guide About the 7156 Printer October 1995 7 Arjo-Wiggins Thermal Papers, Ltd. Whisby Road, North Hykeham Lincoln, Lincolnshire LN6 9AU England Voice: 44 (0) 522 681212 Fax: 44 (0) 522 690972 Paper grade: S552, S662 Nippon Paper Industry Co., Ltd. Business Communication Paper Division Shin-Yurakucho Building 1-12-1, Yurakucho, Chiyoda-ku Tokyo 100 Japan Voice: 03-3218-8049 Fax: 03-3216-1397 Paper grade: TP50 KS Ordering Ribbon Cassettes To order ribbon cassettes, contact your sales representative or order directly from AT&T Global Information Solutions at the following address or toll f

• Axiohm 7156, 7156 Owner’s Guide Commands October 1995 79 Close Form (Slip Station) Closes the feed roller and platen (forms compensation arm assembly) and retracts the forms arm stop. If the printer is reset or the Clear (10) is received, the feed roller and platen are opened. Hex Decimal ASCII 11 17 DC1 Feed n Print Lines Feeds paper n lines at the current line height without printing. Hex Decimal ASCII Value of n 14 n 20 n DC4 n 0-255 Feed n Dot Rows Feeds paper n dot rows without printing. Hex Decimal ASCII Value of n Receipt Slip 15 n 21 n NAK n 0-255 n/152 inch n/72 inch

• Axiohm 7156, 7156 Functional Specification 189-9102894 new RS232 industry standard commands 02 RFC 17319 02 DR 45426 February 5, 1997 Axiohm IPB company confidential page 3 of 12 Add new section 9.8.24. 9.8.24 New industry standard commands These are the new commands: GS I n Transmit printer ID. GS V m n Select cut mode and cut paper. GS a n Enable/disable automatic status back. GS r n Transmit status. The bar code command has been expanded to add an alternate method for printing previously implemented bar codes with 65 ≤ m ≤ 71: GS k m n d1...dn Print bar code. These commands are recognized with their parameters and are igno

• Commands 7156 Owner’s Guide October 199582 Generate Tone Activates a short tone. Hex Decimal ASCII 1B 07 27 7 ESC BEL Set Column Prints the first character of the next print line in column n. The command is not valid with Single or Double Density graphics. Hex Decimal ASCII Value of n Receipt (Pitch) Value of n Slip (Pitch) 1B 14 n 27 20 n ESC DC4 n 1-44 (Standard) 1-56 (Compressed)

• Axiohm 7156, Commands 7156 Owner’s Guide October 199580 Add n Extra Dot Rows Adds n extra dot rows to the character height to increase space between print lines or decrease number of lines per inch. Hex Decimal ASCII Value of n Receipt Slip 16 n 22 n SYN n 0-12 n/152 inch n/72 inch Default = 2 Default = 3 The following table shows the relationship between the number of lines per inch and each extra dot row added for both the receipt and slip stations: Receipt Station Slip Station Extra Rows Lines Per Inch Dot Rows Extra Rows Lines Per Inch Dot Rows 0 8.5 18 0 10.3 7 1 8.0 19 1 9

• Axiohm 7156, 7156 Owner’s Guide Commands October 1995 119 Recognizing Data from the Printer An application sending various real time and non-real time commands to which the printer responds can determine which command a response belongs to by the following table. Note that a response to GS EOT n or DLE EOT n cannot be distinguished from ASCII data coming from a MICR read. While MICR data is still outstanding, an application should use the real time GS ENQ. A response to GS ENQ can still arrive “inside” ASCII MICR data, but it can be recognized and extracted. And although ASCII MICR data cannot be distinguished from responses

• Axiohm 7156, 7156 Owner’s Guide Appendix A: Specifications October 1995 135 Appendix A: Specifications Printing Specifications Thermal Receipt Station Impact Slip Station Speed 600 Lines/Minute (44 Columns), Depends on Column Width 240, 202, 164, 142 Lines/Minute (40 Columns), Depends on Column Width Noise Level 50 dBA Sound Pressure (ISO 7779) 68 dBA Sound Pressure (ISO 7779) Printhead Direct Thermal, Fixed Head Impact, Bi-directional Columns (Maximum) 44 Columns (Standard) 56 Columns (Compressed) 66 Columns (Standard) 80 Columns (Compressed) Line Spacing 7.6 Lines/Inch 7.2, 6.0, 5.1 Lines/Inch Character Pitch 15.2 Characters/Inch (Standard)

Related Products and Documents (Printer):

Comparable Devices:

Similar Resources:

• Dell 1100 - Laser Printer B/W (74 pages) Dell Inspiron 1100, 5100, and 5150 Service ManualDell™ Inspiron™ 1100, 5100, and 5150 Service ManualBefore You BeginSystem ComponentsMemory, CD or DVD Drive, Modem, and Mini PCI CardHard DriveKeyboardDisplayEMI Shield, Video Card, and Palm RestMicroprocessor Thermal-Cooling AssemblyMicroprocessor ModuleSpeakersSystem BoardFlashing the BIOSBase PlasticsPi …

• POS-X Xi3000 (1 pages) Barcode Scanner Formatting Guide Phone 1(800) 790-8657 Fax 1(360) 738-3495 Email: [email protected] Web:Your new POS-X scanner has been pre-configured to the most common settings found amongst scanners in the US. If you are integrating this scanner into a pre-existing system, you may need to configure your scanner to replicate the same formatting us …

• Dell 924 - Photo All-In-One Inkjet (2 pages) Dell Photo All-in-One Printer 924If you’re looking for a printing solution to match the exceptional performance of your Dell computer, the Dell Photo All-in-One Printer 924 is the ideal candidate. The ability to offer colour printing, scanning,photocopying and great photos in a single, compact and high-performance device means you can produce awide variety …

• Tektronix Phaser Z480F32 (2 pages) TEKTRONIX PRINTERS & TEKTRONIX SUPPLIESMADE FOR EACH OTHER®The information in this document is subject to change without notice. Copyright © 1996 Tektronix, Inc. All rights reserved. 12W-1289-1This document was printed on-demand, on a Phaser color printer, to conserve resources. January 8, 1996Phaser® 480/480X ColorPrinter SuppliesTransfer RollsYou ha …

• HP Deskjet 460 - Mobile Printer (2 pages) Product description 250 Global AnonymousHP Deskjet 460c Mobile PrinterHP Deskjet 460cb Mobile PrinterHP Deskjet 460wbt Mobile PrinterFreedom to print on the go with wireless Bluetooth®and 802.11WLAN technologies1. Print at speeds of up to 17 ppm mono and upto 16 ppm colour, from PCs and PDAs plus direct photo printing fromPictBridge-enabled digital cameras …

• Canon imageRUNNER C475iFZ III (92 pages) CANON INC.30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, JapanCANON U.S.A., INC.One Canon Park, Melville, NY 11747, U.S.A.CANON CANADA INC.8000 Mississauga Road Brampton ON L6Y 5Z7, CanadaCANON EUROPA N.V.Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands(See http://www.canon-europe.com/ for details on your regional dealer)CANON AUSTRALIA PTY LTDBui …

Comments, Questions and Opinions: