Manualios.com

Cisco Catalyst 4124 Product Overview

Cisco Catalyst 4124 Manual Online:

4.2, 1760 votes
Cisco Catalyst 4124 User Manual
Cisco Catalyst 4124 User Guide
Cisco Catalyst 4124 Online Manual

Text of Cisco Catalyst 4124 User Guide:

  • CHAPTER 1-1 Catalyst 4000 Series Switch Installation Guide 78-6120-10 1 Product Overview This chapter provides an overview of the features and components of the Catalyst 4000 series switches and contains these sections: • Switch Features, page 1-1 • Switch Components, page 1-12 Switch Features The following sections describe the features of the Catalyst 4000 series switche

  • Chapter 1 Product Overview Switch Features 1-2 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Figure 1-1 Catalyst 4003 Switch (Front View) The Catalyst 4003 switch has a Gigabit Ethernet port and a 12-Gbps nonblocking, full-duplex switching fabric that provides connections between the supervisor engine and the switching modules. The Catalyst 4003 switch supports the

  • Cisco Catalyst 4124, 1-3 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Chapter 1 Product Overview Switch Features Table 1-1 Features of the Catalyst 4003 Switch Feature Description Ethernet speeds • Ethernet (10BASE-T) interface to workstations and repeaters • Fast Ethernet (100BASE-T) interface to workstations, servers, switches, and routers Note Autonegotiation of link speed on each 10/100 port allows migration to 100BASE-T from a 10BASE-T installed base. Standard equipment • Three-slot modular chassis with one slot reserved for a supervisor engine and two slots for switching modules �

  • Cisco Catalyst 4124, Chapter 1 Product Overview Switch Features 1-4 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Embedded management • Full SNMP implementation, including entity-MIB, all relevant standard MIBs, and all relevant Cisco MIBs • The first four RMON groups (Ethernet statistics, Alarms, Events, and History supported) on a per-port basis without an optional RMON processing module • SPAN, allowing redirection of traffic from any port or VLAN to a SPAN destination port • Performance management inf

  • Cisco Catalyst 4124, 1-5 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Chapter 1 Product Overview Switch Features Supported switching modules • 24-port Fast Ethernet switching module (WS-X4124-RJ45) • 24-port 100BASE-FX Fast Ethernet switching module (WS-X4124-FX-MT) • 48-port 100BASE-FX Fast Ethernet switching module (WS-X4148-FX-MT) • 48-port 10/100-Mbps Fast Ethernet switching module (WS-X4148-RJ) • 48-port 100BASE-BX10-D Fast Ethernet switching module (WS-X4148-FE-BD-LC) • 48-port 100BASE-LX10 Fast Ethernet switching module (WS-X4148-FE-LX-MT ) • 48-port 10/100-Mbps Fast Ethernet switching module (WS-X4148-RJ21) �

  • Cisco Catalyst 4124, Chapter 1 Product Overview Switch Features 1-6 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Supported switching modules (continued) • 2-port Gigabit Ethernet switching module (WS-X4302-GB) • 6-port 1000BASE-X Gigabit Ethernet switching module (WS-X4306-GB) • 12-port 1000BASE-TX plus 2-port 1000BASE-X Gigabit Ethernet switching module (WS-X4412-2GB-T) • 18-port Gigabit Ethernet switching module (WS-X4418-GB) • 24-port 10/100/1000BASE-T Gigabit Ethernet switching module (WS-X4424-GB-RJ45) • 48-port Gigabit Ethernet switching module (WS-X4448-GB-LX) • 48-port

  • Cisco Catalyst 4124, 1-7 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Chapter 1 Product Overview Switch Features Catalyst 4006 Switch Features The Catalyst 4006 switch (see Figure 1-2) is a six-slot switch designed for high-performance, high-density wiring closet applications. Figure 1-2 Catalyst 4006 Switch (Front View) The Catalyst 4006 switch has two Gigabit Ethernet ports and a 32-Gbps, nonblocking, full-duplex switching fabric that provides connections between the supervisor engine and the switching modules. The Gigabit Ethernet ports can be configured with any combination of shortwave SX, LX/LH, and ZX GBICs. For a description

  • Cisco Catalyst 4124, Chapter 1 Product Overview Switch Features 1-8 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Table 1-2 describes the features of the Catalyst 4006 switch. Table 1-2 Features of the Catalyst 4006 Switch Feature Description Ethernet speeds • Ethernet (10BASE-T) interface to workstations and repeaters • Fast Ethernet (100BASE-T) interface to workstations, servers, switches, and routers Note Autonegotiation of link speed on each 10/100 port allows migration to 100BASE-T fr

  • Cisco Catalyst 4124, 1-9 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Chapter 1 Product Overview Switch Features Embedded management • Full SNMP implementation, including entity-MIB, all relevant standard MIBs, and all relevant Cisco MIBs • The first four RMON groups (Ethernet statistics, Alarms, Events, and History) on a per-port basis without an optional RMON processing module • SPAN, allowing you to redirect traffic from any port or VLAN to a SPAN destination port • Performance management information Power supplies • Three 400 W, 12 V output, hot-swappable, load-sharing

  • Cisco Catalyst 4124, Chapter 1 Product Overview Switch Features 1-10 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Supported switching modules • Backplane channel module (WS-X4019) • 24-port Fast Ethernet switching module (WS-X4124-RJ45) • 24-port 100BASE-FX Fast Ethernet switching module (WS-X4124-FX-MT) • 48-port 100BASE-FX Fast Ethernet switching module (WS-X4148-FX-MT) • 48-port 10/100-Mbps Fast Ethernet switching module (WS-X4148-RJ) • 48-port 100BASE-BX10-D Fast Ethernet switching module (WS-X4148-FE-BD-LC) • 48-port 100BASE-LX10 Fast Ethernet switching module (WS-X4148-FE-LX-MT

  • Cisco Catalyst 4124, 1-11 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Chapter 1 Product Overview Switch Features Supported switching modules (continued) • 2-port Gigabit Ethernet switching module (WS-X4302-GB) • 6-port 1000BASE-X Gigabit Ethernet switching module (WS-X4306-GB) • 12-port 1000BASE-TX plus 2-port 1000BASE-X Gigabit Ethernet switching module (WS-X4412-2GB-T) • 18-port Gigabit Ethernet switching module (WS-X4418-GB) • 24-port 10/100/1000BASE-T Gigabit Ethernet switching module (WS-X4424-GB-RJ45) • 48-port Gigabit Ethernet switching module (WS-X4448-GB-LX) • 48-port 10/100/1000BASE-TX Gigabit Ethe

  • Cisco Catalyst 4124, Chapter 1 Product Overview Switch Components 1-12 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Switch Components The following components are standard on the Catalyst 4003 switch: • Fan assembly: fan tray and two fans • One Supervisor Engine I • One AC-input power supply The following components are available as options for the Catalyst 4003 switch: • One additional AC-input power supply for redundancy • Up to two switching modules • One or more DC-input power supplies for redundancy The following components are standard on the Catalyst 4006 switch

  • 1-13 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Chapter 1 Product Overview Switch Components Caution You must install module filler plates on unused switching module slots to ensure proper airflow. Figure 1-3 Catalyst 4003 Airflow 16668 T H IS A S S E M B L Y C O N T A IN S E L E C T R O S T A T IC - S E N S I T I V E D E V IC E S C A U

  • Chapter 1 Product Overview Switch Components 1-14 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Figure 1-4 Catalyst 4006 Airflow If one fan on the tray fails, the other fans continue to run. A sensor on the supervisor engine monitors internal air temperature. If the air temperature exceeds a specified threshold, the environmental monito

  • Cisco Catalyst 4124, 1-15 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Chapter 1 Product Overview Switch Components Power Supplies The Catalyst 4000 series switches can use a 400 W AC-input power supply (see Figure 1-5), a 400 W DC-input power supply (see Figure 1-6), or a 650 W DC-input power supply (see Figure 1-7). The AC-input power supply has a power cord that connects each power supply to the site power source. The DC-input power supplies are equipped with a compression-style input terminal block that is directly connected to the site power wiring. The power supply does not have a power s

  • Cisco Catalyst 4124, Chapter 1 Product Overview Switch Components 1-16 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Figure 1-6 400 W DC-Input Power Supply Figure 1-7 650 W DC-Input Power Supply Catalyst 4000 series switches support redundant power supplies. Each power supply has an individual power cord and status LEDs. The Catalyst 4003 switch has one standard power supply and an optional redundant power supply. The 38133 DC power connection Captive screws 48-60V~ 11A + FASTNERS MUST BE FULLY ENGAGED PRIOR TO OPERATING POWER SUPPLY + + + 68609 DC power connection Captive screws -48 -60V 18A

  • Cisco Catalyst 4124, 1-17 Catalyst 4000 Series Switch Installation Guide 78-6120-10 Chapter 1 Product Overview Switch Components Catalyst 4006 switch has two standard power supplies and one optional redundant power supply. Two standard power supplies are required to operate a Catalyst 4006 switch. Systems with three power supplies will share the load with each unit providing approximately one-third of the total load. When power is removed from one power supply on a Catalyst 4003 switch that has two power supplies, the redundant power feature causes the second power supply to produce full power. When power is removed from one powe

  • Cisco Catalyst 4124, Chapter 1 Product Overview Switch Components 1-18 Catalyst 4000 Series Switch Installation Guide 78-6120-10 When you install a redundant power supply, load sharing and fault tolerance are enabled automatically; no additional software configuration is required. Environmental Monitoring Feature With the environmental monitoring and reporting feature, you can keep your system running by resolving adverse environmental conditions before loss of operation. The power supply monitors its own internal temperature and voltages. In the event of excessive internal temperature, th

Related Products and Documents (Switch):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 LG LSXS26466 Service manual lg/lsxs26466-L7F.pdf 19 Oct 2023 78
2 The box Achat 108 Sub Operation & user’s manual the-box/achat-108-sub-4DO.pdf 15 Jul 2022 20
3 Robe CitySkape Xtreme Operation & user’s manual robe/cityskape-xtreme-3QG.pdf 02 Mar 2024 24
4 Speco HT-INTD10 Specification sheet speco/ht-intd10-3PI.pdf 03 Dec 2023 1 0.27 Mb
5 Sanitaire SC9050 Owner's manual sanitaire/sc9050-7QA.pdf 12 Jan 2023 8 1.66 Mb
6 Walker Bay 10 Performance Sail Kit Assembly instructions walker-bay/10-performance-sail-kit-3PZ.pdf 11 Oct 2023 2

Similar Resources:

  • Cypress

    CLUX-C41C

    (7 pages)
    CLUX-C41CCLUX-C41C4x1 HDMIv1.3 SwitcherOperation Manual1. IntroductionThis is a high performance HDMI switcher with 4 separate digital audio inputs and 1 output. It provides for various HDMI sources to share one HDTV display with CEC control fonctions. Simply press one button to select your desired HDMI source for display on the HDTV.2. Features HDMI 1.3 …
  • OEM

    IW-101

    (2 pages)
    IW-101A / B SwitchSource 1 or Source 2orSpeaker Pair A or Pair BSee Reverse Side forIMPORTANT PrecautionaryandInstallation InformationOUTPUTR INPUTL INPUTR– R+ L+ L–B+ B– A– A+A+ A– B– B+CABProduct available inWhite, Ivory & Almond finishesCopyright © 1997 OEM Systems Company, Inc., Sparks, Nevada, 702 355-0405 All …
  • 3Com

    3CRUS2475 24

    (1 pages)
    EC DECLARATION OF CONFORMITY DBU 06009.01 3Com Europe Ltd. Peoplebuilding 2, Peoplebuilding Estate Maylands Avenue Hemel Hempstead Herts, HP2 4NW U.K. We declare under our sole responsibility that the Product: Part Number(s): 3Com Unified Gigabit Wireless PoE Switch 24 3CRUS2475 to which this declaration relates, is in conformity with the following st …
  • Team Young

    EZCon RX02-1

    (2 pages)
    󾋷󾋹Power Switch/RX02-1User Guide/WarrantyThank you for choosing EZCon® Power Switch RX02-1.This Quick Instruction Manual explains the basic installation and using procedures. For the introduction of detailed product installa-tion and troubleshooting, please visit the official website at www.teamyoung.com.tw for downloading.● The product complies w …
  • Middle Atlantic Products

    RackLink

    (2 pages)
    I-00470 Rev -RackLinkIn-Line ModelsMOUNTING INSTRUCTIONS1) Loosen the thumb-screw until it becomes disengaged from the RackLink unit (1). DO NOT fully remove the thumb-screw. The retainer washer will hold the thumb-screw in place. Remove the RackLink unit from the mounting bracket (2). (FIGURE A)2) Install a screw into an oval nut as sho …
  • ZyXEL Communications

    PLA5456

    (2 pages)
    1/2Copyright © 2015 ZyXEL Communications Corp. All Rights ReservedSee the User's Guide at www.zyxel.com for more information.EU Importer: ZyXEL Communication A/S, Gladsaxevej 378, 2. th. 2860 Søborg, Denmark. http://www.zyxel.dk US Importer: ZyXEL Communications, Inc∣1130 North Miller Street Anaheim, CA 92806-2001∣http://www.us.zyxel.comQuick St …

Comments, Questions and Opinions: