Manualios.com

Bang & Olufsen BeoLink Wireless 1 Operation & User’s Manual

  • BeoLink Wireless 1 Wireless Router
  • ma.BSC/jAvKro
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 16

Bang & Olufsen BeoLink Wireless 1 Manual Online:

3.1, 1604 votes
Bang & Olufsen BeoLink Wireless 1 User Manual
Bang & Olufsen BeoLink Wireless 1 User Guide
Bang & Olufsen BeoLink Wireless 1 Online Manual

Text of Bang & Olufsen BeoLink Wireless 1 User Guide:

  • Bang & Olufsen BeoLink Wireless 1, WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equip- ment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. To completely disconnect this equipment from the AC Mains, disconnect the power supply cord plug from the AC receptacle. The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un- insulated “dangero

  • Bang & Olufsen BeoLink Wireless 1, The main room is the room in which you have placed the audio and/or video system – complete with their various sources (the main system). Connected to the main system, you will need a BeoLink Wireless 1 set up as transmitter. The link room is where you have set up another BeoLink Wireless 1 as receiver. To complete the link room setup, you will need a pair of active speakers, and an ‘IR-eye’. The ‘IR- eye’ is necessary in order to be able to operate the system – either by close-up operation, or with a Bang & Olufsen remote cont

  • Close-up operation The small circular ‘IR-eye’ has buttons for close-up operation. You can use the buttons to listen-in on a source currently playing on the main system. You can also use the buttons to adjust the sound volume. The buttons can also be used to include or exclude the link room speakers in a Timer Play programmed on the main audio or vid

  • Bang & Olufsen BeoLink Wireless 1, Beo4 remote control With the Beo4 remote control you can switch on the sources from your main audio or video system you wish to listen to, and you can control functions for those sources – just as if you were operating your main system directly. Functions mentioned here are only available via BeoLink Wireless 1 if the source in question is present in your Bang & Olufsen system and the source supports the function. To switch on an Audio source … > Press RADIO to listen to a radio programme. > Press CD to listen to a CD. > Press A MEM (A TAPE) to listen to an audio recording. To switch on a

  • Bang & Olufsen BeoLink Wireless 1, With the Beo4 remote control you can adjust the sound coming out of the link room speakers. All sound levels are reset to their original values when you switch off the link room – unless you store them permanently. All the current sound levels, including volume level, are stored simultaneously. The sound is adjusted independently from the main audio or video system. To adjust sound volume or mute the sound … > Press or to adjust the sound volume up or down. > Press the middle of the button to mute the sound, and press or to restore the sound. To adjust speaker balance … > Press LIST repeatedly until SPEAKER* is shown in the display. >

  • Bang & Olufsen BeoLink Wireless 1, Set up BeoLink Wireless 1 On the next pages is explained how to install a set of BeoLink Wireless 1 – both in the main room and in a link room. We recommend that you follow this procedure: – Set up connection between the Wireless 1 units as explained on p. 8. – Make the cable connections as explained on pp. 9 and 11. – Check the wireless connection between the main room and link room setups. – If necessary, fasten the units to the wall as explained on pp. 10 and 12. – Set the link room setup to the correct Option as explained on p. 13. – Make sure that Wireless 1 is set up in accordance with the instructions in t

  • Bang & Olufsen BeoLink Wireless 1, Wireless 1 – Transmitter/ receiver … Wireless 1 must be set up as either transmitter or receiver. Before fastening the trans mitter and receiver to the wall, you must establish connection between them. This must be done while the units are located in the same room. The connection procedure described here must be performed for each receiver in a setup – one at a time. If more than one transmitter is necessary, connection must be established between each trans- mitter and each receiver – one by one. Only one transmitter at a time must be switched on, while y

  • Cable connections In the main room: Connect the transmitter to the Master Link socket on the main system. Then connect both the main system and transmitter to the mains supply. In the link room: Connect the loud speakers to the Power Link sockets on the receiver. Connect the ‘IR-eye’ to the socket marked IR (for information about the ‘IR- eye’ and its cab

  • Bang & Olufsen BeoLink Wireless 1, >> Set up BeoLink Wireless 1 Wireless 1 – wall mount Wireless 1 can be fastened to a wall (or ceiling) with one of the two enclosed brackets – in either a horisontal or a vertical position. It can be placed on the bracket so that the cables may be run either to the left or to the right. However, if you place Wireless 1 vertically on a wall, the cables must be run down wards – otherwise the bracket will not hold Wireless 1 safely! Use two screws and wall anchors, each wit

  • ‘IR-eye’ – cable connections The small circular ‘IR-eye’ is available from a Bang & Olufsen retailer. An ‘IR-eye’ must be used in each link room setup. Use the cable supplied with the ‘IR-eye’ and connect it as explained here: > Cut the cable to the required length (from the receiver to the ‘IR-eye’) and strip it as shown. > Insert the cable

  • Bang & Olufsen BeoLink Wireless 1, ‘IR-eye’ – wall mount If the ‘IR-eye’ is placed next to a door and at a suitable height, you can easily switch on or off by close- up operation when entering or leaving the room. Likewise, if it is placed near your telephone, you can switch off the speakers while you are on the phone. > Use the wall plate as a template to mark up the holes on the wall. Insert the screws and wall anchors, but let the two screw heads protrude from the wall as shown (C/D). > Place the wall plate onto

  • Bang & Olufsen BeoLink Wireless 1, Option settings When you have made all the connections as described on the previous pages, you may start to use the system. However, in order for your setup to function properly, you must set the link room setup to one of the following Options: Option 0: Used if you want to disable remote con trol operation in the link room. Option 4: Used if you install a link room setup in the same room as your main system (for example in a large L-shaped room with two separate listen ing positions). Option 5: Used if you set up a Bang & Olufsen television in the link room. Option 6: Used in a setup with the main system in one room, and the link room setup in another – as

  • Bang & Olufsen BeoLink Wireless 1, Waste Electrical and Electronic Equipment (WEEE) – Environmental protection The European Parliament and the Council of the European Union have issued the Waste Electrical and Electronic Equip ment Directive. The purpose of the Directive is the prevention of waste of electrical and electronic equipment, and to promote the reuse and recycling and other forms of recovery of such waste. As such the Directive concerns producers, distributors and consumers. The WEEE directive requires that both manufacturers and end- consumers dispose of electrical and electronic equip

  • Bang & Olufsen BeoLink Wireless 1, This product fulfils the conditions stated in the EEU directives 89/336, 73/23 and the safety standard EN60065, 2002 – CE 2005. This product may be used in member states of the EEU and EFTA. Technical specifications, features and the use thereof are subject to change without notice!

More Instructions:

DOWNLOAD

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 VDO PN 2050 - Quick start manual vdo/pn-2050-Q2G.pdf 15 Nov 2023 26 3.5 Mb
2 PowerMaster H Installation and owner's manual powermaster/h-1L3.pdf 05 Feb 2023 23
3 Rimage Producer IIIN+ 7100N Specifications rimage/producer-iiin-7100n-5UM.pdf 26 Jul 2023 1 0.04 Mb
4 Friedrich WallMaster WE10C33 Installation and operation manual friedrich/wallmaster-we10c33-1TI.pdf 25 Feb 2023 56 3.1 Mb
5 Vulcan-Hart MHB24E Service manual vulcan-hart/mhb24e-5UP.pdf 11 Apr 2023 48 10.22 Mb
6 Phonic Sound Ambassador 35 Deluxe Operation & user’s manual phonic/sound-ambassador-35-deluxe-5QZ.pdf 02 Nov 2023 19

Similar Resources:

  • TP-Link

    TD-W8968

    (2 pages)
    Quick Installation GuideConnecting the Hardware If you don’t need the phone service, just skip step 1 and directly connect the modem router to the phone jack with a phone cable, then follow steps 3 and 4 to complete the hardware connection.300Mbps Wireless N USB ADSL2+ Modem RouterTD-W89687106506038 REV4.0.0 Wi-FiOnPowerOnADSLOn4 Verify that th …
  • D-Link

    DIR-600

    (2 pages)
    Enhanced wireless reception and coverage Connect a notebook or desktop PC to a wireless network Better wireless technology - up to 4X faster than standard 802.11g¹ UPGRADE YOUR WIRELESS NETWORKD-Link® introduces the Wireless 150 Router (DIR-600), which delivers high performance end-to-end wireless connectivity based on draft 802.11n technology. The DIR-600 …
  • TP-Link

    ARCHER MR200

    (63 pages)
    Quick InstallationGuide• Deutsch • English • Español • Eλληνικά • Français • Italiano • Português • Suomi • Nederlands • Svenska • Norsk • Dansk • TürkçeWireless Dual Band 4G LTE RouterTP-LINK TECHNOLOGIES CO., LTD. South Building(floors 1,3,4,5) and 28(flo …
  • NETGEAR

    DGN2200v1

    (2 pages)
    Resource CDInternetADSLPhoneLinePhoneADSLPhoneLineN300 Wireless ADSL2+ Modem RouterDGN2200Installation GuidePackage Contents:Power AdapterTelephone Cable1234Ethernet CableLaptop or DesktopComputerModem Router Poweron/offN300 Wireless ADSL2+ Modem RouterDGN2200Filter Splitter (plug varies by country)Filter/splitterResource CDTip: Use an ADSL microfilterfor ev …
  • Jabra

    REVO

    (9 pages)
    ASIA PACIFICAustralia 1-800-738-521China 800-858-0789Japan 03-3242-8722New Zealand +64 92806301Singapore 800 1012329EMAIL ADDRESSESAustralia [email protected] [email protected] [email protected] Zealand [email protected] [email protected] B jabra.com/revoJABRA REVONEED MORE HELP?Why wait? Go to our suppo …
  • Siemens

    HiPath 500

    (9 pages)
    Communication for the open mindedSiemens Enterprise Communicationswww.siemens.com/openDocumentationHiPath 500, HiPath 2000, HiPath 3000, HiPath 5000 HiPath 4000, HiPath OpenOffice MEOpenStage 40OpenStage 40 TQuick Reference Guideoi.book Seite 1 Dienstag, 12. Februar 2008 4:53 16 …

Comments, Questions and Opinions: