BENDIX BIW 1202 Operating & Installation Instructions Manual

Text of BENDIX BIW 1202 User Guide:

• BENDIX BIW 1202, 12 And in which form? Not only are there different types of detergent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer. Do not sprinkle powder onto clothes in the machine drum. TRADITIONAL LIQUIDS Liquid can be placed in the main wash compartment of the detergent drawer marked with the symbol , start the machine immediately upon placing the detergent in the dispenser drawer. Alter

• BENDIX BIW 1202, 1 Programme guide 2 MAINS-ON Light This light illuminates when the machine starts working and goes out when the ON/OFF button is released. 3 On/Off Button (MAINS ON) By depressing this button the machine starts operating. When depressed again, the machine stops. 4 HALF LOAD Button Select this button to reduce water consumption on the rinse cycle when washing a smaller load of cottons or linens (maximum load size = 2.25 kg). 6 The Control Panel 1 2 3 54 6 95 95 60 40 COTTONS - LINENS Pre-wash & Whites Whites Fast Coloureds Non Fast Coloureds Long spin Mixed Fabrics Quick & Cool Wash Rinses Conditioner Rinse Sho

• BENDIX BIW 1202, 5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 On/Off Button 4 “MAINS-ON” Light 5 “Option” Buttons 6 Programme Selector Dial 7 Door opening handle 8 Filter 9 Adjustable feet Detergent dispenser drawer Prewash Main wash Fabric softener 9 8 2 4 1 7 5 3 6 95 95 60 40 COTTONS - LINENS Pre-wash & Whites Whites Fast Coloureds Non Fast Coloureds Long spin Mixed Fabrics Quick & Cool Wash Rinses Conditioner Rinse Short spin 1 2 3 4 5 BIW 1202 IMPORTANT: PLEASE READ THE INSTRUCTION BOOK BEFORE USE. SELECTOR 40 40 WOOL - DELICATE

• BENDIX BIW 1202, 8 6. Start the machine Before starting up the machine check that: ■ the appliance is plugged in ■ the water supply taps are turned on ■ the drain hose is correctly and securely positioned ■ the door and the detergent dispenser drawer are closed. Depress the ON/OFF button: the mains-on light will illuminate and the machine starts operating. 7. At the end of the programme The machine stops automatically. If you have depressed the RINSE HOLD button, the machine will stop with the water left in the tub, to prevent the fabric from creasing. To drain the water

• BENDIX BIW 1202, 7 Operating Sequence Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment of the dispenser drawer and start the machine. WASHING 4.5 KG OF WHITE COTTON AT 95°C Suppose you have 4.5 kg of normally soiled laundry to wash. It is white cotton and is suitable for high temperature washing. 1. Load the laundry Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time,

• BENDIX BIW 1202, 19 Symptom The door will not open Possible causes ■ The programme is still running. ■ The door lock has not yet released. ■ Water in the tub: the door cannot be opened if water is present in the tub. Spinning starts late or the machine does not spin ■ The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 20 m

• 24 Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not squashed. Remove the polystyrene block from the bottom

• BENDIX BIW 1202, 18 Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Electrolux Service Force Centre, please carry out the checks listed below. IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. Symptom The machine does not start Possible causes ■ The door has not been closed. ■ The plug is not properly inserted in the power socket. ■ There is no supply at the socket ■ The main fuse or the fuse in the plug has blown. ■

• BENDIX BIW 1202, 17 Unscrew and remove the filter. Clean carefully under a fast running tap. Warning When the appliance is in use and depending on the programme selected there can be hot water in the filter. Never remove the filter during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the filter, ensure it is securely retightened so as to stop leaks and young children being able to remove it. The water inlet filters If your water is very hard or contains traces of lime deposit, the water inlet filters may become clogged. It is therefore a good idea to clean them from time to time. Turn off the water taps. Unscrew the

• BENDIX BIW 1202, 25 If only a cold water supply is available, connect the two hoses to a cold water outlet by means of a «Y» connection piece. Installation should comply with local water authority and building regulations’ requirements. The appliance must be given a separate cold water supply and not be connected to a mixer tap, a single outlet water heater or a booster pump. A minimum water pressure of 0.48 bar is required for safe operation of the appliance. If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system. There should be a minimum distance of 5.02m (16.5 ft)

• BENDIX BIW 1202, 26 Levelling Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable. Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and displacement of the machine during operation. Some vibration is inevitable, especially if mounted on a wooden floor. Sprung wooden floors are particularly susceptible to vibration. For advice, consult a builder. If possible, always place the machine on a solid floor. Special conditions If the floor is carpeted or covered with crumbly or soft material, insert a rigid suppo

• BENDIX BIW 1202, 27 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance’s rating plate. The rating plate is located at the top of the rim of the open door. The appliance is supplied with a 13amp plug fitted. In the eve

• BENDIX BIW 1202, 3 Contents For the User Important Safety Information 2 Your New Washing Machine 4 Description of the Appliance 5 Detergent dispenser drawer 5 The Control Panel 6 Operating sequence 7-10 Washing 4.5 kg of white cotton at 95°C 7 Load the laundry 7 Measure out the detergent 7 Measure out the fabric softener 7 Select the required option 7 Select the required programme 7 Start the machine 8 At the end of the programme 8 Washing 2 kg of mixed fabrics at 50°C 9 Load the laundry 9 Measure out the detergent 9 Measure out the fabric softener 9

• BENDIX BIW 1202, Electrolux, 55-77High Street, Slough, Berkshire SL1 1DZ Consumer care telephone number 08705 950950 © Electrolux Household Appliances Limited 2001 132996110.qxd 16/05/01 15.35 Pagina 28 (Nero/Process Black pellicola)

• BENDIX BIW 1202, 2 Installation ■ This appliance is heavy. Care should be taken when moving it. ■ It is dangerous to alter the specifications or attempt to modify this product in any way. ■ All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions. ■ Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. ■ Any electrical work required to install this appliance should be carried out by

• BENDIX BIW 1202, 23 Installation Instructions Technical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Should the appliance power supply cable need to be replaced, this should be carri

Related Products and Documents (Washer):

Comparable Devices:

Similar Resources:

• Bush F841QB (25 pages) Important – Please read these instructions fully before installing or using Installation & User Instructions – Please keep for future reference These instructions contain important information which will help you get the best from your appliance and ensure safe and correct installation, use and maintenance. If you need h …

• Miele H 5740 B (64 pages) Operating instructionsfor Washing machineW 5740To avoid the risk of accidents ordamage to the machine it isessential to read these instructionsbefore it is installed and used for thefirst time.M.-Nr. 07 483 960en-GB …

• LG F1480RD6 (44 pages) OWNER’S MANUALWASHING MACHINE F1480RD(1~9)P/No. : MFL62644916www.lg.comBefore beginning installation, read these instructions carefully. This will simplify installation and ensure that the washer is installed correctly and safely. Leave these instructions near the washer after installation for future reference. …

• Indesit WIE 107 (72 pages) 1GBEnglish,1ContentsInstallation, 2-3Unpacking and levelling, 2Electric and water connections, 2-3The first wash cycle, 3Technical details, 3Washing machine description, 4-5Control panel, 4Display, 5MEMO Programme, 5Starting and Programmes, 6Briefly: how to start a programme, 6Programme table, 6Personalisations, 7Setting the spin cycle, 7Setting the De …

• AEG Electrolux EWF 1210 (22 pages) GBPLCZSKHINSTRUCTION BOOKLETINSTRUKCJA OBSLUGINÁVOD K OBSLUZENÁVOD NA OBSLUHUHASZNÁLATI ÚTMUTATÓEWF 1210WASHING MACHINEPRALKA AUTOMATYCZNAAUTOMATICKÁ PRACKAAUTOMATICKÁ PRÁCKAAUTOMATA MOSÓGÉP132 990040132991140 copertina 20-08-2003 15:45 Pagina 1 …

• Morgan MWM-Vagor 13 FA (10 pages) E-mail: [email protected] ExpansionServices bywww.dksh.com.myfacebook.com/morganappliancesUSER MANUALMWM-Vagor 13 FAAutomaticWashingMachineMWM-Vagor 13 FA(IM)141215_Layout 1 12/18/15 10:39 AM Page 1 …

Comments, Questions and Opinions: