Manualios.com

BenQ DV3750 Operation & User’s Manual

BenQ DV3750 Manual Online:

4.4, 2049 votes
BenQ DV3750 User Manual
BenQ DV3750 User Guide
BenQ DV3750 Online Manual

Text of BenQ DV3750 User Guide:

  • BenQ DV3750, English 9. Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on or bitten by small animals. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product. 10. Attachments - Do not use attachments not recommended by the manufacturer. Use of improper attachments can result in accidents. 11. Accessories - When the product is used on a trolley, care should be taken to avoid quick stops, excessive force, and uneven surfaces that may cause the product and trolley to overturn, damaging equipment or causing possible injury to the operator. Do not place this product on

  • BenQ DV3750, On-Screen Display (OSD) Menu14 English 5. Press the  or  button to select Save Settings, and press the OK button to enter the submenu. 6. Press the  or  button to save your settings in To Personal 1 or To Personal 2 and then press the OK button to confirm. Selecting a Picture Mode 1. Press the MENU button on your remote control or the MENU button on the display to bring up the OSD menu. 2. Press the  or  button to select Picture and press the OK button to enter the submenu. 3. Press the  or  button to select Advanced Picture Settings, and press the OK button to enter the submenu. 4. Press the  or  button to select Picture Mode, and p

  • Setting up Your Display 9 English Connecting Audio Output Signals Connecting the Power Cord 1. Connect the female end of the AC power cord to the AC input on the display. 2. As shown in the diagram, connect the male end to a wall power outlet. • The figure above shows the power cord connection. The shape of the physical power cord plug and socket will differ depending on the loc

  • On-Screen Display (OSD) Menu 15 English Freeze Freeze motion of screen image (however, broad- cast continues). Use the  and  buttons on the remote control or the VOL and VOL buttons on the display to change selection. • No • Yes Backlight Adjust backlight inten- sity. Use the  and  buttons on the remote control or the VOL and VOL  buttons on the disp

  • On-Screen Display (OSD) Menu16 English PIP/PBP Functions are available with 480P, 576P, 720P and 1080i signal formats. PC Menu Options in this menu are available only if you have connected PC or DVI signals to the display. Graphics Input Select graphics signal input source for PIP/ PBP function. Use the  and  buttons on the remote control or the VOL�

  • BenQ DV3750, Introduction 1 English Introduction Thank you for purchasing the BenQ DV3750 LCD Display. Your DV3750 will bring you years of high-quality viewing enjoyment. It is also extremely easy to operate, and provides exceptionally high image quality. The DV3750 is also extremely versatile. You can install it on the wall (optional wall-mounting kit is required) or set it on a table, and it can be used under any type of illumination. This manual will explain the operation of the DV3750, including its functions and features and other important information. Before installing or operating your

  • BenQ DV3750, Supported Modes 19 English Supported Modes Optimal settings for this product are as listed above. It is suggested that you select appropriate settings from this table to obtain optimal performance. Dimensional Drawings Resolution Horizontal Freq. (khz) Vertical Freq. (Hz) Bandwidth (Mhz) Notes 720 × 400 31.47 70.08 28.32 DOS mode 640 × 480 31.47 60.00 25.18 DOS mode 640 × 480 37.50 75.00 31.50 VESA 640 × 480 37.86 72.80 31.50 VESA 800 × 600 37.88 60.32 40.00 VESA 800 × 600 46.86 75.00 49.50 VESA 1024 × 768 48.36 60.00 65.00 VESA Unit: mm DV3750-En.book Page 19 Thursday, August 18, 2005 11:44 AM

  • BenQ DV3750, Getting Started with Your Display4 English Term i na l Pa ne l 2INPUT • This button allows you to switch among different input signal sources. • When the OSD (On-Screen Display) menu is on, press this button to enter the submenu. 3 Selection / button When the OSD menu is on, press these buttons to move the selection focus up or down or change settings. 4 Vo lu m e/ button • Press Vol u me to increase the volume, or Vo lu m e to decrease it. • When the OSD menu is on, press these buttons to move the selection focus left and right or change settings. 5

  • BenQ DV3750, Setting up Your Display6 English Setting up Your Display Connecting Audio and Video Signal Sources • Before connecting any component, please familiarise yourself with the location and type of each input. • If incorrect connections are made, picture or color quality may be adversely affected. Please ensure that all connectors are firmly seated. • Before connecting external devices, turn off the power to the display for safety. Connecting Composite (AV) Video Signals 8DVI • DVI (Digital Video Input): For connecting to PC's digital video output. • DVI AUDIO (Audio input, L/R): For connecting to DVI's digital audio output. 9 AC INLET Connect the power cord to this

  • BenQ DV3750, English Copyright Copyright BenQ Corporation. All rights reserved. No part of this User's Manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. Disclaimer BenQ Corporation makes no repre

  • Troubleshooting 17 English Troubleshooting Before calling a service center, attempt the following steps to diagnose the problem. Symptoms Possible Causes Power does not turn ON Ensure the power plug is securely inserted into the receptacle and wall socket. There is no picture or sound • Ensure the display power is ON (Indicated by the green Power indicator on the front of the display) • Try

  • BenQ DV3750, On-Screen Display (OSD) Menu 11 English Navigating the OSD Menu You can use the OSD menu screen to adjust all the settings on your display. Follow the steps outlined below to select the function you desire, and refer to the pages indicated for more information. Press the MENU button on your remote control, or the MENU button on your display to bring up the following main menu on your screen: • Press the,, or button on the remote control, or the Selection , Selection , VOL or VOLbutton on the display to select items on the main menu, choos

  • BenQ DV3750, Setting up Your Display8 English Connecting RGB Signals (Mini D-SUB) Connecting DVI Signals 1. Connect the analog video output of your PC to the PC D-SUB terminal on the display using a Mini D-SUB 15-pin cable. 2. Connect the audio output of your PC to the display's PC AUDIO input terminal using an appropriate cable. 1. If the input signal resolution is higher than the default display resolution, the screen may be unable to display image details clearly. 2. You will need a converter to connect a Macintosh computer video to the display us

  • BenQ DV3750, Getting Started with Your Display 5 English Main Unit (Rear View) No. Name Description 1 AUDIO OUT (L/R) Connect the audio input of an amplifier or here. 2 RS232 This terminal is for service purpose only. 3AV2 • VIDEO (Composite (AV) signal input, RCA connector): Connect the Composite video output of your AV device here. • AUDIO (Audio input, L/R): Connect the audio output of your AV device here. This input is used common to both AV and S-VIDEO input. • S-VIDEO (S-VIDEO input): Connect the S-VIDEO output of your AV device here. 4AV1 • VIDEO (Composite

  • BenQ DV3750, English 22. Pixel defect - The LCD panel is a high technology product, giving you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product. 23. Installation of an external antenna - If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it f

  • BenQ DV3750, Getting Started with Your Display 3 English Getting Started with Your Display Main Unit (Front View) Control Panel No. Name Description 1 Power indicator • Lights up green when the display is powered on. • Lights up red when the display is in standby mode. • Flashes red when the display is connected to a PC and the PC enters standby mode. 2 Remote control sensor window Receives the signal from the remote control. Do not put any objects in front of the window in order not to hinder the reception of signals. No. Name Description 1Power • Press this button to turn the display on when it is in

  • BenQ DV3750, Package Contents2 English Package Contents Please ensure that the following items are included with your DV3750 LCD Display. If any item is missing or damaged, contact an authorized dealer immediately. Actual number and type of cables may vary with the location of purchase. User's manual (x1) R e m o t e c o n t r o l ( x 1 ) Power cord (x1) AAA batteries (x2) Composite (AV) cable (x1) DV3750 LCD Display (x1) DV3750-En.book Page 2 Thursday, August 18, 2005 11:44 AM

  • BenQ DV3750, Specifications18 English Specifications Design and specifications are subject to change without notice. Picture is not clear. • Make sure the antenna cable is properly connected. • If PC is selected as the input signal source, use the Auto function in the PC Menu to let the display adjust picture automatically. No sound. • Check whether you have selected the Mute function. • Make sure the volume is not set to minimum. • Check the AV cables for disconnection. Model DV3750 Size 94 cm (37 inches) Aspect ratio 16:9 Resolution 1920 x 1080 Pitch 0.42675 x 0.42675 (mm) Brightness 550 nits Contrast ratio 80

  • BenQ DV3750, On-Screen Display (OSD) Menu12 English Picture Menu Sound Type Select the sound type for video inputs. Use the  and  buttons on the remote control or the VOL and VOL buttons on the display to change selection. • Stereo • Sound 1 • Sound 2 MTS Select broadcasting audio type. Use the  and  buttons on the remote control or the VOL and VOL buttons on the display to change selection. • Stereo • SAP • Mono Steady Sound Automatically adjusts the sound level to be constant when viewing programs. This option will become unavailable if Audio Out is set to On. Use the  and  buttons on the remote cont

  • BenQ DV3750, Setting up Your Display 7 English Connecting S-Video Signals Connecting Component Video Signals 1. Connect the S-Video output of your AV equipment to the display's S-VIDEO terminal using an S-Video cable. Pay attention to the direction of the connector on the S-Video cable when inserting. 2. Connect the audio output of your AV equipment to the display's S-VIDEO AUDIO L/R input terminals using the AV cable or equivalent. An S-video signal provides a higher quality image to that of Composite video. It is recommended to use this input whenever possible. If your AV equipment provides a component video output (YP BPR or YCBCR), this should be used

  • BenQ DV3750, On-Screen Display (OSD) Menu 13 English Picture Mode Settings 1. Press the MENU button on your remote control or the MENU button on the display to bring up the OSD menu. 2. Press the  or  button to select Picture and press the OK button to enter the submenu. 3. Select an option (Contrast, Brightness, Color, Tint...) from the Picture menu to adjust your favorite image quality. 4. Press the  or  button to select Advanced Picture Settings, and press the OK button to enter the submenu. Color Adjust color saturation.  for higher saturation, for lower saturation. 0 to 64 Tint Adjust color tint.  for redder tones,  for gr

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Vitek VT-IRBD1 Specifications vitek/vt-irbd1-R8L.pdf 16 Nov 2023 2 0.07 Mb
2 Sonic Blue HT2030 Operation & user’s manual dolby-laboratories/ht2030-672.pdf 17 Jul 2023 45 1.59 Mb
3 Vaterra TWIN HAMMERS VTR03085 Owner's manual vaterra/twin-hammers-vtr03085-217.pdf 12 Mar 2023 3
4 Yumpi Midline 91Ti General assembly yumpi/midline-91ti-911.pdf 01 Mar 2023 18
5 SMSC USB2250 Datasheet smsc/usb2250-JZU.pdf 25 Jul 2023 35 0.65 Mb
6 YMGI VRFI-07EL-D2B(55)5 Manual  ymgi/vrfi-07el-d2b555-42L.pdf 07 Dec 2022 36

Similar Resources:

  • YORKVILLE

    ELITE LS720P

    (12 pages)
    U.S.A. Yorkville Sound Inc. 4625 Witmer Industrial Estate Niagara Falls, New York 14305 USA Voice: (716) 297-2920 Fax: (716) 297-3689 WORLD HEADQUARTERS WEB ACCESS: http://www.yorkville.com CANADA Yorkville Sound 550 Granite Court Pickering, Ontario L1W-3Y8 CANADA Voice: (905) 837-8481 Fax: (905) 837-8746 Quality and Innovation Since 1963Printed in Canada SE …
  • American Dynamics

    ADLCD10PPS1WM

    (55 pages)
    User Guide MODEL A PVM 10” ADLCD10PPS1WM 8200-11220-01-A0 The Tyco/American Dynamics has two models with different operation for each. This User Guide is for Model A. The Model A can be identified by the operation of the onboard DVR. When accessing the onboard DVR, the Model A version will prompt for a password. The Model A version …
  • I-Tech

    iNAP-2700W

    (28 pages)
    Dedicated LCD display solutions User Manual 27” FHD 1920 x 1080 LCD fr ^ JAP-2700W Aluminum front bezel JNAP-2700W ^ Front NEMA4/IP65 JOP-2700W Universal Mounting Open Frame F© C€ St RoHS REACH JJ |-T~E^j|""I i-Tech Company LLC C^DN^RA.N^r' TOLL FREE: (888) 483-2418 • EMAIL: [email protected] • WEB: www.iTechLCD.com …
  • Sanyo

    VMC-8614F - 14" Super High Resolution Color Monitor

    (2 pages)
    VMC-8614F• 14”Full-Square (FS) CRT with 90˚Deflection• More than 800 Lines of HorizontalResolution• Dual TV Standard, NTSC and PAL• Composite Video A/B Inputs• Audio A/B Inputs• S-Video Input14” Super High Resolution Color Monitor …
  • HP

    LaserJet Pro P1100 series

    (8 pages)
    重要信息:执行打印机硬件设置海报上的步骤 1 - 3,然后执行下一页上的步骤 4。ZHCN4. 在控制面板上进行初始设置 ..............................25. 选择一种连接方式并准备安装软件 ..................26. 找到或下载软件安装文件 .................................27. 安装软件 .................... …
  • PYLE Audio

    PLVWR740

    (2 pages)
    7'' 16:9 Roofmount TFT LCD Colour MonitorMANUALPlease read this manual before operatingV Trouble ShootingPhenomenonReasonNo picture and soundAC adapter or automobile adapter is improperly connected. Power switchis off.Audio volume is off or in "mute" cond-ition. Press VOL+No soundRemote Controlnot workingNotice to CustomersPress hard obje …

Comments, Questions and Opinions: