Manualios.com

CLASSÉ AUDIO CDP-300 Owner's Manual

CLASSÉ AUDIO CDP-300 Manual Online:

3.8, 1526 votes
CLASSÉ AUDIO CDP-300 User Manual
CLASSÉ AUDIO CDP-300 User Guide
CLASSÉ AUDIO CDP-300 Online Manual

Text of CLASSÉ AUDIO CDP-300 User Guide:

  • 39 5. The screen shows an error message and the Eject button does not eject the disc (or the player shows some other anomalous behavior). ✓ Press the Standby button so the screen dims and the blue light goes on. ✓ Using the rear panel power switch, turn off the unit for at least thirty seconds. Then turn the power back on and press Standby to restart the unit. 6.

  • CLASSÉ AUDIO CDP-300, 5 The Menu System ..........................................................................................26 main menu system ................................................................................. 26 system setup .................................................................................... 26 teach IR ........................................................................................... 26 display setup .................................................................................... 27 trigger

  • CLASSÉ AUDIO CDP-300, 8 serial number The serial number for your DVD player is found on the rear of the unit. Please note and record this number on the page entitled Important Safety Instructions for your future reference. register your purchase! Having found the serial number, now would be a good time to fill out the registration card. Please register your purchase so we can advise you of updates and other items of interest. It will take only a minute or so. Please complete the card now, before you forget. operating voltage The CDP-300 DVD player is set at the factory (internally

  • Classé Audio 5070 François Cusson Lachine, Quebec Canada H8T 1B3 +1 (514) 636-6384 +1 (514) 636-1428 (fax) http://www.classeaudio.com email: [email protected] Copyright © 2006 Classé Audio, Inc. Printed in Canada. V 2.0 040506

  • CLASSÉ AUDIO CDP-300, 34 distance The distance setting adjusts the speaker distance settings manually as you might have done with a surround processor. Simply measure the distance with a tape measure or equivalent, and enter the distance into the menu. The CDP-300 will automatically convert this distance to the appropriate delay, to ensure that you hear the sound from each speaker when you are supposed to hear it, despite the varying distances usually involved. (These delays are applied to the multichannel analog output only. Your surround processor will handle the signals sent

  • 15 For this reason, you are advised to use component video connections whenever possible. This advice holds especially true for the CDP-300, since it incorporates sophisticated video processing circuitry that can convert the standard definition DVDs you play to high definition rates that are most compatible with today’s best video displays. The Component video out

  • CLASSÉ AUDIO CDP-300, 33 digital output The digital outputs of the CDP-300 can be configured in any of three ways, based on how you plan to use the player: • off — for example, if you plan to use only the multichannel analog outputs, and not send a digital signal along to a separate processor. • raw — which passes along the native signal of whatever disc is playing, whether that is PCM, Dolby Digital, DTS, or anything else. This setting assumes that your external processor can handle anything you might send its way. • PCM stereo — if the soundtrack you are playing contains multichannel information, it will be “downmixed” to a two-channel PCM signal that would be compatible with

  • 21 • Disc Menu presents the menu of available chapters, within whatever title you are watching at the moment. (See explanation of DVD menus in this section.) • Title gives you a list of available “titles” on the disc you are watching. (See explanation of DVD menus in this section.) • Up/Down/Left/Right keys allow you to move within a particular menu screen, changing the highli

  • CLASSÉ AUDIO CDP-300, 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. If a liquid does enter your component, immediately disconnect it from the AC mains and take it to your Classé dealer for a thorough checkup 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. NEVER expose this

  • CLASSÉ AUDIO CDP-300, 16 4 Digital Outputs The CDP-300 has three digital outputs, all of which carry the same information. You may use whichever connection you prefer, consistent with the available connections on your A/V preamplifier/processor. Only one of the three connections is needed. coaxial digital output The coaxial digital output provides a digital audio signal via a 75Ω coaxial cable equipped with RCA-type connectors. Connect this output to a corresponding coaxial digital input on your preamplifier/processor. AES/EBU digital output The AES/EBU output provides

  • CLASSÉ AUDIO CDP-300, 28 For example, if you use the shuffle mode frequently, you may want to consider programming one of the Fkeys to toggle that function on and off. Doing so will save you having to access the control menu, followed by pressing the shuffle button (which might be hard to see from across the room, even though you could do so from the remote control with an Fkey assignment) . The remote Fkey menu has four buttons, one each for the four Fkeys on your remote control. Pressing any of these buttons on the LCD touchscreen takes you to a subordinate, scrolling list of possible functions for that particular Fkey. Selecting the one you want is as simple a

  • CLASSÉ AUDIO CDP-300, 4 Contents Welcome to the Classé family ..........................................................................6 a word about installation .......................................................................... 6 Unpacking and Placement ...............................................................................7 unpacking your player .............................................................................. 7 placement ................................................................................................ 7 ventilation ..................................................................

  • CLASSÉ AUDIO CDP-300, 2 NOTICE All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all Classé components have been officially approved for the European Community (CE) mark. This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world. The CE mark certifies that your purchase meets or exceeds all European Community requirements for unit-to-unit consistency and consumer safety. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

  • CLASSÉ AUDIO CDP-300, 24 controls menu The controls button on the operational display brings up a menu of controls, including repeat mode, shuffle, time display, and program. repeat mode Pressing the repeat mode button on the controls menu displays a screen on which you may select any of the three repeat modes available: no repeat, repeat track, and repeat disc. (If you have created a program, repeat disc will repeat the program.) shuffle Pressing shuffle on the controls menu will engage the shuffle mode , which shuffles the playback order of the tracks on the current CD. time disp

  • CLASSÉ AUDIO CDP-300, 20 • Time cycles through the four time display modes: time elapsed on track time elapsed on disc time remaining on track time remaining on disc • Prog (for Program) allows you to quickly and easily create a programmed sequence of tracks (or chapters) to be played on the current disc. Pressing Prog will take you directly to the program page of the menu system, regardless of where you might be. Once on the program page, you can change the highlighted track using the Up and Down buttons, and can use th

  • CLASSÉ AUDIO CDP-300, 6 Welcome to the Classé family Congratulations on your purchase of a Classé product. It is the result of many years of continuous refinement, and we are sure that you will enjoy it for many years to come. We value our relationship with our customers. Please allow us to stay in touch with you by returning your warranty card now, before you pack up the shipping carton of your new product and forget all about it. Doing so will enable us to let you know about any possible future upgrades or updates that might become available for your Classé component. Sending in your warranty ca

  • CLASSÉ AUDIO CDP-300, 40 Care & Maintenance To remove dust from the cabinet of your DVD player, use a feather duster or a lint-free soft cloth. To remove dirt and fingerprints, we recommend isopropyl alcohol and a soft cloth. Dampen the cloth with alcohol first and then lightly clean the surface of the player with the cloth. Do not use excessive amounts of alcohol that might drip off the cloth and into the player. Caution! At no time should liquid cleaners be applied directly to the player, as direct application of liquid

  • CLASSÉ AUDIO CDP-300, 7 Unpacking and Placement unpacking your player Carefully unpack your DVD player according to the supplied instructions, and remove all accessories from the carton. Important! Keep all packing materials for future transport of your Classé product. Shipping your new component in anything other than its purpose-designed packing material may result in damage that is not covered by the warranty. placement The CDP-300 has been designed to operate optimally on any stable and level surface. Incorporating vibration damping within the CDP-300’s feet and CD/ DVD Drive Assembly, a high level of isolation from externa

  • 19 The Remote Control Your new DVD player comes with a versatile remote control which can control both the CDP-300 itself and several aspects of the rest of a Classé-based system. The keys are arranged in logical groups according to their functions. 1 Basic Functions This section along the top of the remote control includes two groups of four functions that c

  • CLASSÉ AUDIO CDP-300, 22 5 System Controls The CDP-300 remote control also can control user-defined functions as well as the volume and mute functions on a Classé system. • F1/F2/F3/F4 keys are available for controlling aspects of the CDP-300 not covered by the other buttons on the remote control. You are able to choose what the CDP-300 should do in response to receiving the infrared signal that a particular “Fkey” has been pressed. The list of possible functions is quite extensive, and is found in the menu system (see The Menu System section, of this manual).

  • CLASSÉ AUDIO CDP-300, 9 warm up/break-in period Your new Classé DVD player will deliver outstanding performance immediately. However, you should expect to hear it improve somewhat as it reaches its normal operating temperatures and its various components “break-in.” It has been our experience that the greatest changes occur within the first 300 hours, as the player reaches thermal equilibrium and the capacitors fully form. After this initial break-in period, the performance of your new product should remain quite consistent for years to come. The only exception to this

  • CLASSÉ AUDIO CDP-300, 18 8 RS-232 Control Port This port has two purposes: • downloading new operating software into your player (should new features ever be added, for example) • external control of your preamplifier by systems such as i-Command ™ , AMX ® and Crestron ™ For more information, please contact your dealer and ask about home automation systems. 9 AC Mains Power Switch The main power switch for the CDP-300 is located at the right side of the rear panel. The player should be in standby mode before being switched off. Switching the unit on puts it in standby mode. Danger! Potentially dangerous voltage

Related Products and Documents (DVD Player):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Thermador VCI 230 Use and care manual thermador/vci-230-134.pdf 08 Dec 2022 28 1.81 Mb
2 Zebra KR203 Programming manual zebra/kr203-FE6.pdf 27 Jul 2023 58
3 Icom IC-F5120D Series Instruction manual icom/ic-f5120d-series-LB6.pdf 18 Nov 2022 24
4 IEI Technology KINO-QM670 Operation & user’s manual iei-technology/kino-qm670-A66.pdf 06 Mar 2024 186
5 1life air Operation & user’s manual 1life/air-97H.pdf 02 Dec 2023 4
6 Velleman PROMIX02 Operation & user’s manual velleman/promix02-9B1.pdf 17 Jan 2024 12

Similar Resources:

  • Philips

    DVP3150V

    (2 pages)
    PhilipsDVD/VCR PlayerDVP3150VAll in one, playback and recording on VHSThe all-in-one player that plays your movie collections in DVD discs & VHS tapes. This combination is the only player that maximizes convenience & enhances your movie experience. One player plays all!Plays all your movies and music• Plays CD, (S)VCD, DVD, DVD+R/RW, DVD-R/RW, DVD …
  • Philips

    DVD724AT

    (2 pages)
    Philips DVD-Video Player With Progressive ScanPICTURE QUALITY• 3:2 Pull down progressive scan• Parallel component, S-Video & composite video outputs• Digital Zoom with Perfect StillSOUND QUALITY• Digital coaxial and optical outputs: highest quality audio connection• 96kHz/24bits audio DAC for high quality audio output• 3D sound: sur …
  • Coby

    DVD-524

    (1 pages)
    COBY DVD524 IMPORTANT PLEASE READ! COMMON TROUBLESHOOTING ISSUES ISSUE #1 NO PICTURE Make sure your TV is turned to the correct Video line (AV Input/Video Input 1,2,3.etc). Consult the TV manufacture if you need help setting the TV to the correct Video line. If you are going through a cable box, contact your cable provider or the cable manufacture. Once yo …
  • Numark

    DVD01

    (32 pages)
    Professional Dual DVD Player Quick Start Owner’s Manual Manual de inicio rápido del usuario (ESPAŃOL) Kurzbedienungsanleitung (DEUTSCH) Guide d’utilisation simplifié (FRANÇAIS) Manuale rapido di utilizzazione (ITALIANO) CONTENUTI DELLA CONFEZIONE • Unità principale DVD • Controller • 2 cavi di controllo • Cavo di alimen …
  • FUNAI

    CDV225FX4

    (24 pages)
    PRECAUTIONSSETUPVCR FUNCTIONSDVD FUNCTIONSINFORMATIONDIGITALAUDIO OUTCOAXIALAUDIOOUTDVD VCRDVD/VCRS-VIDEOOUTCOMPONENTVIDEO OUTAUDIO INVIDEO INAUDIO OUTVIDEO OUTLLYRLRRCB/PBCR/PRDVD/VCRAUDIO OUTVIDEO OUTLRVCRAUDIO INVIDEO INLRIf your TV only has an Antenna input(no A/V inputs), you will need an RF modulator (NOT INCLUDED) to connect this Unit to your TV.RF mo …
  • Denon

    DVD-700

    (60 pages)
    DVD VIDEO PLAYERDVD-700OPERATING INSTRUCTIONSBEDIENUNGSANLEITUNGISTRUZIONI PER L’USOMODE D’EMPLOIGEBRUIKSAANWIJZINGINSTRUCCIONES DE FUNCIONAMIENTOBRUKSANVISNINGE57E2/E5/E7_UK.QX33 03.5.21 13:24 Page 1 …

Comments, Questions and Opinions: