Manualios.com

Clifford 900-IQ Owner's Manual

Clifford 900-IQ Manual Online:

4.5, 1049 votes
Clifford 900-IQ User Manual
Clifford 900-IQ User Guide
Clifford 900-IQ Online Manual

Text of Clifford 900-IQ User Guide:

  • Clifford 900-IQ, Smart AutoTesting™ Each time you remotely arm the system, it tests all triggers and sensors. If the hood or trunk is open when you remotely arm, the system will immediately alert you of the problem by sounding 4 chirps and 4 parking light flashes instead of the usual 2 and 2. If a door is ajar, you will receive the usual 2 chirps and flashes, then, 5 seconds later, there will be 4 chirps and 4 flashes. (This door ajar warning will not work on vehicles that have factory-delayed courtesy lights). If a sensor is malfunctioning, you will receive the usual 2 chirps and 2 flashes, then, 10 seconds later, there will be 4 chirps and 4 flashes. NOTE: Since this is a warning indication,

  • Clifford 900-IQ, Smart prior intrusion attempt alert If you hear three chirps when you remotely disarm, it means that a trigger or sensor was activated in your absence. When you enter the vehicle and turn on the ignition (or start the engine), the LED will blink 1-5 times, pause, then repeat the blink cycle 4 more times. Count the number of blinks in one cycle and refer to the chart on page 19. High-output MultiSound Medallion™ Siren All the siren electronics are in the system control unit rather than the siren itself. This protects them from heat, dirt and exposure to the ele

  • Clifford 900-IQ, Standard Features of the IntelliGuard 9OO-IQ (cont.) ✔ Dual-Mode “Chirp” Silencing—Whenever you remotely arm or disarm, the siren “chirps” and the parking lights flash to confirm system status. Whenever you wish, you may silence the chirps with either of these two methods: Remote Controlled Chirp Muting —Just a press of remote control button 3 will arm and disarm the system silently. It’s perfect when parking at night in a quiet residential area. Long-Term Chirp Silencing — Silence the chirps until you choose to reactivate them. ✔ Remote Door Locking/Unlocking with Built-in Relays — No more fumbling with keys in the dark or bad weather! A press of a button on

  • Clifford 900-IQ, To transmit either channel 1, 2, 3 or 4: Just press either button 1, 2, 3 or 4. For instance, to transmit channel 3, press button 3. While you transmit, the LED indicator will blink once every second: this indicates level 1. To transmit either channel 5, 6, 7 or 8: Press the LevelShift button once. This shifts buttons 1-4 to level 2 (channels 5-8). Then press the desired button within the next 7 seconds. For instance, to transmit channel 5, press the LevelShift button once, then press button 1. While you transmit, you’ll notice that the LED indicator blinks twice, pau

  • Clifford 900-IQ, Table of Contents Standard Features of the IntelliGuard 9OO-IQ . . . . . . . . . . . . . . . . 3 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Built-in vehicle recovery/anti-carjacking circuitry . . . . . . . . . . . . . 9 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Your secret disarming code . . . . . . . . . . . . . . . . . . . . . . . . 9 IMPORTANT: What you MUST do to drive

  • User-selectable features Your IntelliGuard 900-IQ allows you to set many of its features to your own personal preferences. Although the system’s programming capabilities are very extensive, we have made the programming procedures very simple: to make a change, you just flick the PlainView switch a few times. Once you’ve changed a few settings, you’ll find tha

  • Clifford 900-IQ, Standard Features of the IntelliGuard 9OO-IQ (cont.) ✔ User-Programmable MultiSound Medallion™ Siren — The IntelliGuard 900-IQ’s innovative MultiSound Medallion siren integrates creative form and engineering triumphs. Designed entirely by Clifford engineers, there’s no other siren like it. The remarkable Clifford MultiSound Medallion Siren is far superior in its performance, features, reliability and even aesthetics to all other manufacturer’s look-alike, sound-alike generic sirens. User-Selectable SilentNight™ — You can set the system to sound its usual arm and disarm chirps during daylight hours, but automatically silen

  • Clifford 900-IQ, Standard Features of the IntelliGuard 9OO-IQ ✔ Lifetime Warranty —For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge. ✔ FACT™—False Alarm Control and Test — One of many patented Clifford innovations, FACT absolutely, positively puts an end to recurring false alarms. ✔ A Pair of 4-Button/12-Channel Remote Controls —Fingertip command from a range of 100 feet. One remote has a gun-metal gray finish, the other has a gorgeous laminated burlwood case. ✔ AntiScan™ — Some car t

  • Clifford 900-IQ, EXAMPLE 1: Turn off siren sound number 2: You can turn each of the siren’s six different sound patterns on and off as you wish to create you own custom sound (see the Personalized Siren Sounds section on page 20 for more information) To turn off “Sound 2” you’ll note that “Sound 2” is in column 1, row 2 of the Table (on pages 24-25). The “ on” in bold type indicates the factory setting. The following example will turn that one sound off: 1. To enter program mode, turn on the ignition, ent

  • Clifford 900-IQ, Table of user-selectable features: 1 chirp = OFF, two chirps = ON. Feature Select Column 1 1st latched Column 2 2nd latched Column 3 3rd latched Column 4 4th latched Column 5 5th latched Row 1 1st momentary Sound 1: on /off info on page 20 Add new remote to channel 1 info on page 12 NOTE 1 AutoLock on /off info on page 16 Enhanced AutoArming: on /off info on page 15 NightVision on /off info on page 18 Row 2 2nd momentary Sound 2: on/off info on page 20 Add new remote to channel 2 info on page 12 NOTE 2 RPM-activated AutoLock on/off info on page 16 AutoArm & Lock: on/off info on page 15 Post-p

  • Clifford 900-IQ, TO ARM THE SYSTEM . . . . . . . Press button 1 (channel 1) once. You will hear two chirp s and the parking lights will flash twice. The dashboard LED will flash repeatedly and the car doors will automatically lock. TO DISARM THE SYSTEM . . . . . . . Press button 1 (channel 1) again. One chirp and one parking light flash confirms disarming. In addition, the doors will automatically unlock and the interior lights will turn on and stay on for 30 seconds or until you start the engine, whichever occurs first.

  • Clifford 900-IQ, Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your IntelliGuard 900-IQ vehicle security/convenience system. Clifford Electronics has long been recognized as the world’s leading manufacturer of high-technology vehicle security systems and accessories. In fact, Clifford Electronics holds more patents than all other vehicle security manufacturers combined. Buying Clifford has always meant buying the best, and nowhere is our commitment to technological innovation, reliability and quality more evident than in the astounding IntelliGuard 900-IQ — our top-of-the-line model.

  • Clifford 900-IQ, Optional starter interrupt With the addition of an optional relay, while the system is armed, the vehicle’s starter circuit is electronically disconnected. Our Fault-Proof design ensures that you’ll be able to start the engine even in the unlikely event of a system malfunction. Enhanced AutoArming™ If this feature is enabled and you forget to remotely arm, the system will automatically arm itself 30 seconds after the vehicle doors are closed. For your convenience, if you re-open any door(s) within the

  • Clifford 900-IQ, Table of Contents Remote controlled override of optional sensor #2 . . . . . . . . . . . . . . 17 Smart trunk release option . . . . . . . . . . . . . . . . . . . . . . . . . . 17 NightVision™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 How to interpret the LED status indicator . . . . . . . . . . . . . . . . . . . 18 Automatic Battery-Saving Mode . . . . . . . . . . . . . . . . . . . . . . 18 Smart AutoTesting™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Specific malfunction identificati

  • To enable valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Enter your secret disarming code (as noted on page 9) on the PlainView switch, then return the switch to its center position. 3. You now have 5 seconds to press latched position to enter valet mode. The system’s LED will glow continually for on-going visual confirmation of valet m

  • Clifford 900-IQ, IMPORTANT: What you MUST do to drive your car If you have the anti-carjacking feature turned on, until you set your own disarming code, you will use the factory-set code: the single digit “2.” To drive your car, do the following: 1. Start the engine, then press the brake pedal, then enter the factory-set code via the rocker switch mounted on the dashboard or console (you may do this while driving): a. To enter the factory-set disarming code of “2,” tap the momentary (spring-loaded) side of the PlainView switch twice. b. Press the PlainView switch to its other side (latched side), then return the switch to its center position. You may continue driving.

  • Clifford 900-IQ, Remote controlled sensor adjustments Due to ever-changing conditions, all alarms require periodic fine-tuning of their sensors. With other alarms, this requires repeated trips back to the dealer. Not so with IntelliGuard 900-IQ. You can adjust sensitivity electronically without tools and without even knowing where the sensor is mounted! If the setting(s) of the OmniSensor is either too sensitive or not sensitive enough, you may individually test and adjust the settings of each zone. To adjust the OmniSensor, just use the following procedure: 1. Disarm the system with the remote control. 2. If you wish to adjust the primary zone, transmit channel 11 (LevelShift twice, then button 3). If

  • Clifford 900-IQ, Standard Features of the IntelliGuard 9OO-IQ (cont.) ✔ NightVision™ Headlight Automation — You’ll never need to turn the headlights on or off ever again! IntelliGuard 900-IQ’s built-in NightVision circuitry takes care of illumination control in every lighting and weather condition, whether driving at dusk, dawn or in the rain. Safety Above All™ — You’ll never again accidentally drive in the dark with the headlights off nor forget to turn the head- lights off after parking. For your safety and that of other motorists, when driving at twilight, your car’s headlights auto- matically turn on just before dusk and switch off after dawn. Pre

  • How to interpret the chirps and parking light flashes When you use the remote control, the system responds with chirps (unless the chirp muting feature is turned on) and parking light flashes. These chirp/flash acknowledgments mean: Chirps and flashes Meaning 1 Your system is disarmed or you have remotely exited valet mode (see page 16) 2 Your system is armed or

  • Clifford 900-IQ, Enable/disable anti-carjacking You may enable or disable the anti-carjacking feature (see User-selectable features on pages 21-25) or temporarily override it via UltraSecure Coded Valet Mode (see page 15). What to do in a carjacking situation In a carjacking situation, the sooner you are out of the car the better. Don’t resist or take anything with you, just get out and get away. The instant the car door is opened, your IntelliGuard 900-IQ takes charge. First it lets the carjacker drive a short distance, ensuring your safety. Then it flashes the brake lights and sounds the siren to caution drivers near your vehicle. It then waits for the carjacker to slow for a

  • Clifford 900-IQ, NightVision™ All of the following NightVision Headlight Automation features are built into your IntelliGuard 900-IQ: User-selectable: You may turn the NightVision features on or off whenever you wish (see pages 21-25). When driving at dusk: The system automatically turns on the headlights. When driving at dawn: The system automatically turns off the headlights. Precision activation: NightVision automatically and unerringly turns the headlights on or off only when necessary. For instance, if it is dark when the car’s engine is started, NightVision instantly turns on the headlights, yet when the vehicle is driven under an overpass in daylight, the headlight

  • Clifford 900-IQ, 5. To exit the program mode, turn the ignition off. You’ll hear 3 chirps to confirm program mode exit. You just made three programming changes in only five steps. Easy, isn’t it? Notice again that in step 3 on the previous page you did not have to re-select column 1. If you don’t touch the switch, the system stays in the column for 10 seconds to allow you to select any other feature(s) in the same column without having to re-enter the column number. Of course, you can select a new column at any time. If you wait more than 10 seconds, the system automatically jumps back to the “Feature Select” position. This is the “stand-by�

Related Products and Documents (Car Alarm):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Briggs & Stratton MS-1055 Repair manual briggs-stratton/ms-1055-2Q2.pdf 27 Sep 2022 128
2 Brother CE-8080PRW Manual del instrucción brother/ce-8080prw-5G6.pdf 20 Feb 2024 104 7.9 Mb
3 Dedicated Micros MSUA1T25 Setup and maintenance manual dedicated-micros/msua1t25-N8F.pdf 04 Aug 2022 12
4 Baum 714XA A-2-P-1 Instruction manual baum/714xa-a-2-p-1-M48.pdf 23 Jul 2023 49
5 Auerswald COMpact 3000 analog Installation, operation and configuration instructions auerswald/compact-3000-analog-4CU.pdf 03 Jan 2024 608
6 Thane Fitness AB DOER TWIST Quick start manual thane-fitness/ab-doer-twist-IGZ.pdf 17 Oct 2022 24

Similar Resources:

  • Directed

    DS3+

    (22 pages)
    Designed by Installers for InstallersINSTALLATION GUIDEDS3+ / DS4+2020 Hyundai Santa Fe. 933.HK18 1.13.195.3© 2021 Directed, Vista CAThis product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s electrical system and co …
  • Autostart

    AS-2360i TW-FM

    (4 pages)
    Ì É Ñ ó É ß Ç Ô Û Ü Ó ß Ò Ë ß Ô Ì Î ß Ò Í Ó × Í Í × Ñ Ò Î Û Ó Ñ Ì Û Í Ì ß Î Ì Û ÎÒ±¬·½» ̸» ³¿²«º¿½¬«®»® ©·´´ ¿½½»°¬ ²± ®»°±²·¾·´·¬§ º±® ¿²§ »´»½¬®·½¿´ ¼¿³¿¹» ®»«´¬·²¹ º®±³ ·³°®±°»® ·²¬¿´´¿¬·±² ±º � …
  • Viper

    771XV

    (58 pages)
    © 2005 Directed Electronics, Vista, CAN567V 07-05NOTE: This product is intended for installation by a professional installer only!Any attempt to install this product by any person other than a trained professionalmay result in severe damage to a vehicle’s electrical system and components.MMooddeell 777711XXVVIInnssttaallllaattiioonn GGuuiiddee …
  • Phobos

    Mistral Max 2

    (24 pages)
    MODULÁRNY AUTOALARM ● Montážny manuál MODULÁRNÍ AUTOALARM ● Montážní manuál VEHICLE SECURITY SYSTEM ● Installer’s manual SK CZ EN …
  • Clifford

    Proximity Sensor 4

    (2 pages)
    Digital Dual-Zone Proximity Sensor IVOwner’s ManualThe Digital Dual-Zone Proximity Sensor IV defines the newstate of the art in radar sensing technology. It is the onlyradar sensor that can clearly determine the difference between alurking thief and other conditions that cause other manufacturer’sradar sensors to false alarm. And the Digital Dual-Zone Pr …
  • Viper

    5601

    (64 pages)
    Security and Remote Start Model 5601Installation Guide This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s electrical system and components.© 2008 Directed Electronics, Vista, CA N5102V 2008-06 …

Comments, Questions and Opinions: