Manualios.com

Brady BP-PR PLUS Series Quick Operator's Manual

Brady BP-PR PLUS Series Manual Online:

3.05, 1656 votes
Brady BP-PR PLUS Series User Manual
Brady BP-PR PLUS Series User Guide
Brady BP-PR PLUS Series Online Manual

Text of Brady BP-PR PLUS Series User Guide:

  • Brady BP-PR PLUS Series, 2 Quick Operator’s Guide Edition 7/06 BP-PR PLUS series Information on the scope of delivery, appearance, performance, dimensions and weight reflect our knowledge at the time of printing. We reserve the right to make modifications. All rights, including those regarding the translation, are reserved. Approval The transfer printers comply with the following safety guidelines: CE EC Low-Voltage Directive (73/23/EEC) EC Machine Directive (98/37/EC) EC Electromagnetic Compatibility Directive (89/336/EEC) FCC Conditions from Part 15 of the FCC Regulations for Class A computing devices. Operation of this device may cause radio or tel

  • Brady BP-PR PLUS Series, BP-PR PLUS series Notes on the documentation Edition 7/06 Quick Operator’s Guide 3 1 Notes on the documentation The documentation for the BP-PR PLUS series transfer printers is comprised of the following parts: • Operating Instructions • Configuration Instructions • Service Instructions Additional documentation • Spare parts lists • Programming manual 2 Safety and the environment Read these operating instructions carefully before using the transfer printer for the first time. The oper- ating instructions describe all of the functions of the transfer printer during operation. The available func- tions depend on

  • Brady BP-PR PLUS Series, 4 Quick Operator’s Guide Edition 7/06 Safety and the environment BP-PR PLUS series 2.2 Safety notes • The transfer printer is designed for power supply systems from 100 V AC to 240 V AC. Connect the transfer printer only to electrical outlets with a ground contact. • Couple the transfer printer to devices using extra low voltage only. • Before making or undoing connections, switch off all devices involved (computer, printer, accesso- ries etc.). • Operate the transfer printer in a dry environment only and do not get it wet (sprayed water, mist etc.). • If the transfer printer is operated with the cover open, ensure that clothing, hair, jewelry and similar personal

  • Brady BP-PR PLUS Series, BP-PR PLUS series Installation Edition 7/06 Quick Operator’s Guide 5 3 Installation 3.1 Unpacking the transfer printer ⇒ Lift the transfer printer out of the box via the straps. ⇒ Check transfer printer for damage which may have occurred during transport. ⇒ Check delivery for completeness. Scope of delivery 3.2 Setting up the transfer printer • Transfer printer • Empty cardboard core, mounted on ribbon take-up hub • Tear-off plate (basic devices only) • Dispense plate (peel-off device ver- sion only) • Power cable • Documentation Retain the original packaging for subsequent transport. CAUTION! The device and the print media can be damaged by moisture and water. �

  • Brady BP-PR PLUS Series, 6 Quick Operator’s Guide Edition 7/06 Installation BP-PR PLUS series 3.3 Connecting the transfer printer 3.3.1 Connecting to the power supply The printer is equipped with a versatile power supply unit. The device may be operated with a mains voltage of 230 V AC/ 50 Hz or 115 V AC/60 Hz without any adjustments or modifications. 1. Insert power cable into power connection jack (2). 2. Insert plug of the power cable into a grounded electrical outlet. 3.3.2 Connecting to a computer or computer network ⇒ Connect transfer printer to computer or network with a suitable cable. Details on the configuration of the individual interfaces are fou

  • BP-PR PLUS series Operating panel Edition 7/06 Quick Operator’s Guide 7 4 Operating panel 4.1 Layout of the operating panel 4.2 Functions of the operating panel during printing 4.2.1 Symbol indicators The symbol indicators shown in the following table can appear on the status line of the screen, depend- ing on the configuration of the printer. They inform you of the current status of

  • Brady BP-PR PLUS Series, 8 Quick Operator’s Guide Edition 7/06 Operating panel BP-PR PLUS series 4.2.2 Power-Save mode If the printer is not used for some time, it switches to Power-Save mode automatically. The display shows the graphic and button illumination is switched off. To exit Power-Save mode: ⇒ Press any button on the navigator pad. 4.2.3 Button functions Tab. 2: Button functions Button State Function menu Ready Go to offline menu (see “Configuration Instructions“) feed Ready Advances an empty label pause Ready Repeat printing of last label Pr

  • Brady BP-PR PLUS Series, BP-PR PLUS series Device types Edition 7/06 Quick Operator’s Guide 9 5 Device types 5.1 Standard device The standard device is used for printing labels or continuous media on rolls or fanfolded media. In Tear-Off mode, labels are removed by hand. The labels can be cut off automatically with the 'cutter' accessory. For details, see the Operating Instruc- tions for the 'cutter' accessory. The labels can be wound up with the 'external rewinder' accessory. For details, see the Operating Inst

  • Brady BP-PR PLUS Series, 10 Quick Operator’s Guide Edition 7/06 Loading media BP-PR PLUS series 6 Loading media 6.1 Loading labels from a roll 6.1.1 Removing and installing the core adapter A core adapter is mounted for better guidance of the label roll on the roll retainer when using label rolls with a core diameter ≥ 75 mm. Remove core adapter for smaller label rolls as follows. For adjustments and simple installation work, use the accompanying hexagonal wrench located in the bottom section of the print unit. See Fig. 5, Item 8. No other tools are required for the work described here. Fig. 4: Installing the core adapter

  • Brady BP-PR PLUS Series, BP-PR PLUS series Loading media Edition 7/06 Quick Operator’s Guide 11 6.1.2 Positioning the label roll on the roll retainer Fig. 5: Loading labels from a roll 1. Open cover (10). 2. Loosen knurled screw (1) and swivel guide (2) upward and push it all the way out. 3. Remove core adapter (4) for label rolls with a core diameter ≤ 75 mm (see ”6.1.1” on page 10). 4. Load label roll on the roll retainer in such a way that the labels can be inserted into the printhead in the right position. The printing side of the labels must be visible from above. 5. Supplying longer label strips: For

  • 12 Quick Operator’s Guide Edition 7/06 Loading media BP-PR PLUS series 6.1.4 Setting the label sensor Fig. 6: Setting the label sensor The label sensor (2) can be shifted perpendicular to the direction of paper flow for adaptation to the label medium. The sensor unit (1) of the label sensor is visible from the front through the print unit and is marked with a indentation in th

  • Brady BP-PR PLUS Series, BP-PR PLUS series Loading media Edition 7/06 Quick Operator’s Guide 13 6.1.5 Winding up the label strip in Rewind mode Fig. 7: Guiding the label strip in Rewind mode In Rewind mode, the labels are wound up internally after printing for later use. 1. Remove the locking system for Rewind mode if necessary (see ”6.5” on page 18) and install rewind guide plate (see ”6.4” on page 17). 2. Guide label strip around the rewind guide plate (4) to the internal rewinder (2). 3. Hold rewinder (2) firmly and turn knob (3) clockwise until it stops. 4. Push label strip under a bracket (1) of the rewinder and turn knob (3) counterclockwise until it stops.

  • Brady BP-PR PLUS Series, 14 Quick Operator’s Guide Edition 7/06 Loading media BP-PR PLUS series 6.1.6 Winding up the liner in Peel-Off mode Fig. 8: Guidance of the liner in Peel-Off mode In Peel-Off mode, the labels are removed after printing, and only the liner is wound up internally. 1. Lift the pinch roller (4) off the rewind assist roller (5). 2. Remove labels from the first 100 mm of the liner. 3. Guide liner to the rewinder (2) around the dispense plate (6) and the rewind assist roller (5). 4. Hold rewinder (2) firmly and turn knob (3) clock

  • Brady BP-PR PLUS Series, BP-PR PLUS series Loading media Edition 7/06 Quick Operator’s Guide 15 6.1.7 Setting the head locking system The printhead is pushed on via two plungers. The location of the outer plunger must be set to the width of the label medium used so as to • achieve even print quality across the entire label width • prevent wrinkles in the feed path of the transfer ribbon • prevent premature wearing of the print roller and printhead. Fig. 9: Setting the head locking system 1. Turn lever (3) clockwise to lock the printhead. 2. Loosen threaded pin (1) at outer plunger (2)

  • Brady BP-PR PLUS Series, 16 Quick Operator’s Guide Edition 7/06 Loading media BP-PR PLUS series 6.2 Loading transfer ribbon With direct thermal printing, do not load a transfer ribbon; if one has already been loaded, remove it. Fig. 10: Feed path of the transfer ribbon 1. Clean printhead before loading the transfer ribbon (see ”8.3” on page 20). 2. Turn lever (4) counterclockwise to lift the printhead. 3. Slide transfer ribbon roll (2) onto the ribbon supply hub (3) until it stops and so that the color coating of the ribbon faces downward when being unwound. No rotation direction is specified for th

  • Brady BP-PR PLUS Series, BP-PR PLUS series Loading media Edition 7/06 Quick Operator’s Guide 17 6.3 Setting the feed path of the transfer ribbon Transfer ribbon wrinkling can lead to print image errors. Transfer ribbon deflection can be adjusted so as to prevent wrinkles. See also “Setting the head locking system” on page 15. 6.4 Removing and installing the rewind guide plate, dispense plate or tear-off plate To convert the printer for use in another operating mode, a rewind guide plate, a dispense plate or a tear- off plate may need to be installed. The adjustment is best carried out during printing. Fig. 11: Setting the feed

  • Brady BP-PR PLUS Series, 18 Quick Operator’s Guide Edition 7/06 Loading media BP-PR PLUS series 6.5 Removing and installing the locking system Fig. 13: Removing the locking system Removing the locking system 1. Position printer at edge of table so that the oblong hole is accessible from below. 2. Screw out screws (1) (2) and remove them. 3. Remove the pinch roller (4) and bottom plate (3). Installing the locking system 1. Position printer at edge of table so that the oblong hole is accessible from below. 2. Place the pinch roller (4) into oblong hole and lightly t

  • Brady BP-PR PLUS Series, BP-PR PLUS series Printing Edition 7/06 Quick Operator’s Guide 19 7Printing 7.1 Synchronization The printer is ready for operation when all connections have been made, the labels and, if necessary the transfer ribbon, have been loaded and the printhead is locked. For details on printer configuration, see the “Configuration Instructions“. After loading the label medium, synchronization is necessary. During synchronization, the printer auto- matically determines the length of the loaded labels and sets label advancement accordingly. 1. Press the feed button to start synchronization. 2. Remove empty labels after synchron

  • Brady BP-PR PLUS Series, 20 Quick Operator’s Guide Edition 7/06 Cleaning and basic maintenance BP-PR PLUS series 8 Cleaning and basic maintenance 8.1 General cleaning When: as necessary. ⇒ Remove dust and paper fuzz in the printing area with a soft brush or vacuum cleaner. ⇒ Clean outer surfaces with an all-purpose cleaner. 8.2 Cleaning the print roller When: each time the label roll is changed or when the print image and label transport are adversely affected. 1. Turn lever (4, Fig. 10) counterclockwise to lift the

  • BP-PR PLUS series Cleaning and basic maintenance Edition 7/06 Quick Operator’s Guide 21 8.4 Cleaning the label sensor When: when the label roll is changed The label sensor can become dirtied with paper dust. This can adversely affect label detection. CAUTION! Label sensor can be damaged! ⇒ Do not use sharp or hard objects or solvents to clean the label sensor. Fig. 14: Cleaning the l

  • Brady BP-PR PLUS Series, 22 Quick Operator’s Guide Edition 7/06 EC Declaration of Conformity BP-PR PLUS series 9 EC Declaration of Conformity EU Conformity Declaration We declare herewith that as a result of the manner in which the machine designated below was designed, the type of construction and the machines which, as a result have been brought on to the general market comply with the relevant fundamental regulations of the EU Rules for Safety and Health. In the event of any alteration which has not been approved by us being made to any machine as designated

Related Products and Documents (Printer):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Kenwood KDC-Z737 Instruction manual kenwood/kdc-z737-L3D.pdf 30 Apr 2023 40
2 Zanussi ZWA 5110 Instruction manual zanussi/zwa-5110-7DJ.pdf 02 Mar 2024 25 1.22 Mb
3 Hunter 23902 Parts manual hunter/23902-ZFN.pdf 27 Apr 2023 2
4 Grizzly H8246 Instructions grizzly/h8246-12Y.pdf 09 Aug 2022 2 0.27 Mb
5 Cuisinart Buona Tazza Quick reference manual cuisinart/buona-tazza-U6N.pdf 10 Feb 2023 2 0.46 Mb
6 Martin Audio AM604 - SCHEMATICS Manual  martin-audio/am604-schematics-CN3.pdf 08 Nov 2023 1

Similar Resources:

  • Epson

    Stylus COLOR 460

    (10 pages)
    A STYLUS COLOR 460 Page 1 REF PART NO DESCRIPTION SPEC QTY 100 1039820 HOUSING;B 1 101 1039821 COVER,PRINTER;B 1 102 1040615 PAPER SUPPORT;B 1 103 1039828 STACKER ASSY.;B 1 104 1039829 PANEL ASSY.,RIGHT;B 1 105 1030603 SHIELD PLATE,PANEL 1 106 1039827 HOUSING,PANEL,LEFT;B 1 107 1037312 BUTTON,P/S;B 1 108 1030669 …
  • Zebra

    RW 420

    (12 pages)
    RW SeriesQuick Start Guide 1IntroductionGetting StartedUsing the PrinterTroubleshootingAccessoriesContact Us© ZIH Corp 2007 QSG-RWS-003 Rev. AIntroductionThank you for choosing one of our Zebra RW Series™ Mobile Printers. These rugged printers will become productive and efficient additions to your workplace thanks to their innovative de-sign. Because the …
  • Xerox

    WorkCentre3325

    (3 pages)
    © 2016 Xerox Corporation. All rights reserved. XEROX® and XEROX and Design®, ColorQube®, and WorkCentre® are trademarks of Xerox Corporation in the United States and/or other countries. Technical Support Operations Page 1 of 3 Purpose This Bulletin is intended ONLY for the specific security problems identified below. The problems identifie …
  • Epson

    LQ-580

    (10 pages)
    EPSON Stylus Color 5808/00 EPSON Stylus Color 580 - 1AccessoriesInk CartridgesMediaThe Media Type setting for your paper may not be the same name as your paper.The availability of paper types varies by location.Printer SpecificationsPrintingPrinting method On-demand ink jetNozzle configurationBlack 48 nozzlesColor 45 nozzles (15 each: cyan, magenta, yellow)R …
  • HP

    DesignJet Z2600

    (36 pages)
    HP cares about the environmentHP DesignJet Z2600 PostScript® PrinterHP DesignJet Z5600 PostScript® PrinterIntroductory InformationHP DesignJet Z2600 PostScript®プリンタHP DesignJet Z5600 PostScript®プリンタ基本情報HP DesignJet Z2600 PostScript® 打印机HP DesignJet Z5600 PostScript® 打印机介绍性信息HP DesignJet Z2600 PostScript® � …
  • HP

    Laserjet,Color Laserjet 4550

    (48 pages)
    Network Installation GuideGuide d’installation sur réseauHandbuch für die NetzwerkinstallationGuida di installazione in reteGuía de instalación de redNetwerkinstallatiehandleidingGuia de instalação de rede …

Comments, Questions and Opinions: