Breezaire EXV Series Installation And Operating Manual

Text of Breezaire EXV Series User Guide:

• Breezaire EXV Series, Installation and Operating ManualInstallation and Operating Manual N A T U R A L L Y C O O L E R N A T U R A L L Y C O O L E R EXV Series Evaporative Air Coolers EXV Series Evaporative Air Coolers

• Breezaire EXV Series, 11 Index INDEX SAFETY.........................................................................................................1 OPERATING INSTRUCTIONS Thermostat Range.........................................................................................2 Using the SENSORTOUCH Remote Control...................................................3 Using the SENSORTOUCH Wall Control.........................................................7 Maintenance.................................................................................................. 9 Pre-Assembly Inspection...............................................................................

• Breezaire EXV Series, SAFETY INSTRUCTIONS Important Safety Instructions and Warnings WARNING: The warnings and safety instructions in this manual must be followed to reduce the risk of fire, electric shock or injury, and to provide reasonable safety and efficiency in using this Evaporative Air Cooler. The operator is responsible for following the warnings and instructions in this manual and on the cooler. Read this entire manual before proceeding to install the cooler. Restrict the use of this cooler to persons who read, understand and can follow the warnings and instructions in this manual and on the cooler. NEVER ALLOW CHILDREN TO OPERATE THE COOLER. Failure to o

• 11 22 Thermostat Range 2 Wall Mounted Thermostat Control (wall control) Remote Thermostat Control (remote control) AUTO COOL PM FAN SPEED ECONOMY REMOTE CONTROL ILL239-D ILL1140-A ® thermostat range SENSORTOUCH SENSORTOUCH

• Breezaire EXV Series, 11 33 Using the SENSORTOUCH Remote Control SETTING THE CLOCK Set the clock on the remote control before proceeding with any other programming. The clock can only be set with the remote control switched OFF. Hold the button down for over 2 seconds, until the hour flashes. The clock can be set to either 12 or 24 hours (see page 6). If the clock is set to 12 hours make sure that the AM/PM displayed on the screen is correct. AM/PM will change with adjustment of the hour. Use the and buttons to change the hour. T

• AUTO TIMER OFF ILL1115-A 44 AUTO TIMER MODE Programming the timer must be performed before AUTO TIMER can be activated. This can be done while in any mode, even when it is OFF. There are 7 steps involved in setting the AUTO TIMER. NOTE: After pressing the button the display will revert back to the previous setting if no buttons are pressed within 4 seco

• Breezaire EXV Series, 55 ECONOMY MODE Selecting the ECONOMY mode limits the maximum available cooling or ventilation and reduces the power used by up to 20%. The ECONOMY function can be used in either AUTO or MANUAL modes. To select this mode press the button so that ECONOMY appears on the display. DRAIN MODE Pressing the button opens the drain valve in the cooler and empties the water in the tank. This will leave the tank clean and dry and turn the cooler off. If the cooler has not been used for 3 days or 3 ho

• Breezaire EXV Series, 66 The high salinity setting is designed to operate the cooler at a maximum safe salinity level to maintain a normal working life. It also results in a minimum usage of water. NOTE: High salinity outlet water should not be used on salt sensitive grass or plants. It has a high salt content. The current WaterManager setting is displayed by holding down the button and pressing the button. The setting can be changed by holding down the button and pressing either the

• Breezaire EXV Series, 77 STARTING YOUR COOLER AUTOMATIC MODE MANUAL MODE button until MAN is shown on the display. The button turns the air cooler on and off. There are two modes of operation to choose from, Automatic mode or Manual mode. When the air cooler is turned on, it will start in the mode of operation it was in when last turned off. If your air cooler has been off for more than (about) 10 minutes, when you start it, “Preparing to Start” may flash on the display as shown. This shows that the water pump will operate to saturate the cooling pads for a few minutes, before the fan is turned on. This ensures that when the fan

• Breezaire EXV Series, 88 TIMED AUTOMATIC STOP USING THE COOLER AIR TOO COLD AIR NOT COLD ENOUGH You can also set the air cooler so that it will turn off after a set number of hours. 1.To set a delayed stop time, press with the cooler RUNNING. ”Stopping in” will display. 2.Press or to adjust the number of hours before the air cooler will stop. The maximum delay setting is 24 hours. 3. Press again to begin the timed stop. Now that you have read these instructions, press the button to turn your air cooler on. If the air cooler has not operated for a while “Preparing to Start” will flash on the display (see page

• Breezaire EXV Series, 99 Press or to select your desired delay time. 4. Press to set your selection. DRAIN MODE At any time when the wall control is OFF, you can manually drain the cooler by pressing and holding and for 1 second. The display will show “dr” to confirm the operation has activated. WARNING! Maintenance must be carried out by an authorized service agent. Power to the cooler must be disconnected before pad frames are removed or you may risk personal injury. WARNING! If the supply cord is damaged, it mus

• Breezaire EXV Series, 11 1010 Pre-Assembly Inspection PRE-ASSEMBLY INSPECTION ! Check that the correct cooler has been supplied. The cooler should have the following parts:- (Check the parts are inside the cooler by removing a cooling pad frame.)

• Breezaire EXV Series, SLIDE UNIT ON ITS LID TO AVOID DAMAGE TO CUTOFF PLATE ILL939-A 11 1111 Installation Details UNPACKING THE COOLER Cut and remove the shrink wrap from around the cooler. Using 2 people, carefully lift the cooler up and away from it’s skid (Fig 1). REMOVING PAD FRAMES Firstly remove the corner clips, which are located above the top louvre and third louvre from the bottom on all corner joins. The clips will require a screw driver to aid removal. Each frame is clipped into the cooler and is removed by use of a medium sized screwdriver. Insert the screwdriver into the small slots at the

• Breezaire EXV Series, 1212 Installation Details SECURING LEG SUPPORTS After levelling and securing the cooler onto the roof jack you are ready to fix the four leg supports. The telescopic leg supports (with feet attached) slide up and down inside the four cooler corner posts. By removing the screw from the lower end of the corner post you enable the leg support to slide down to roof level. Refer figs 9, 10 & 11 for the procedure for adjusting and securing the leg supports. 9 10 12 Install a manual water shut-off valve near the point of entry of the water supply to the cooler, in the permanent water supply. In areas subject to win

• Breezaire EXV Series, SENSORTOUCH 1313 Installation Details INSTALLING THE DRAIN KIT The drain adaptor allows the attachment of a ¾" drain hose to run water to a waste point. Attach it to the drain valve fitting underneath the pan by using the drain nut. (Fig. 16) It is a requirement of Seeley International - Never drain the water directly on to the roof (This applies to all types of control/drain systems). Assemble drain valve as shown (Fig 15). Make sure that the o-ring is fitted before placing the drain valve into the hole. S

• Breezaire EXV Series, 1414 22 CONNECTOR ORIENTATION (side view) NOTE: SPLASH COVER NOT SHOWN FOR CLARITY. Nota: Para mayor claridadno se muestra la tapa protectora.. WATER PROBE Sonda del agua MINIMUM SPEED ADJUST Ajuste de la velocidad PUMP DRAIN Valvula de drenaje INLET Entrada del agua RECEIVER Receptor DIAGNOSTIC LED’S LED’s de diagnóstico Bomba ILL1392-A Orientación del conectador (vista lateral) MOTOR POWER (AMPS) Important: Install all the pad frames except the one on the motor side. Ensure that all intended doors, windows or other means of exhaust are open in the building, and that all outlet grilles are open fully. WARNING: Beware of rotating fan, belt and pulleys whilst making

• Breezaire EXV Series, 1515 SENSORTOUCH Remote Control 26 Remote Thermostat Control (remote control) AUTO COOL PM FAN SPEED ECONOMY REMOTE CONTROL ILL239-D SENSORTOUCH LOCATING THE REMOTE CONTROL The remote control should be placed approximately 5 feet (1.5 meters) above the floor, in the most used room in the home. This will give the optimum temperature sensing and operating position for the user. Placement is critical for correct functioning of the thermostat (incorporated in the remote control). The following points mu

• 11 1616 Testing the Cooler LOCATION AND TESTING Important! One of the most critical parts of the installation is the location of the remote control and receiver. If this combination of components are not set up / located correctly, it can result in chargeable service calls. After the cooler has been installed, place the remote control in the selected wall posi

• Breezaire EXV Series, 11 1717 Testing the Cooler TESTING THE COOLER Once you are satisfied that the cooler is installed and commissioned correctly, it is important to run the cooler and ensure that everything is working as it should. Try turning the cooler on and off with the remote control in all of the rooms in the house. This will make sure that the receiver is located correctly. Check that the cooler runs quietly and with a balanced distribution of air to all outlets. Make sure there are no water leaks. Initiate a drain of the

• Breezaire EXV Series, REMOTE CONTROL DIP SWITCHES Record the dip switch settings for this cooler below (if applicable) WARNING: Do not alter DIP switches 1 to 8 on top row and 7 & 8 on bottom row as the cooler will cease to work. Definition of DIP switch positions (first 6 in bottom row only) are as follows: (1) Reserved for later use. (2) OFF, 24 hour clock. ON, 12 hour clock. (3) OFF, 1.0, 3/4HP Motor. ON, Not Used (4) OFF, no pre-cool. ON, pre-cool. (5) OFF, drains 3 days after power off. ON, drains 3 hours after power off. (6) OFF, drains every 65 minutes of operation. ON, activa

• 11 1919 Installation Troubleshooting PROBLEM PROBABLE CAUSE SUGGESTED REMEDY Under-sized cooler. Replace with larger cooler. Replace with larger ducts.Under-sized ducts. Clean or replace pads. Clogged or dirty cooling pads. Check water distribution system for possible obstruction in hoses. Check pump. Tighten belt by re-adjusting the motor position. Replace belt if worn. Dry pads or lack of

• Breezaire EXV Series, 11 2020 PROBLEM PROBABLE CAUSE SUGGESTED REMEDY Float valve adjustment not correct. Adjust float valve. Continuous overflow of water. Insufficient water in pan. Adjust float level. Pump runs but no water circulation. Pump runs but pads lack water. Water hoses blocked. Check and clean out blockage. Pump strainer blocked. Clean pump strainer. Auto Drain Valve malfunctioning Check and remedy function. Installation Troubleshooting Heavy pad deposits. Clean or replace pads. Pads not fitted correctly into pad fr

• US 0710847078-A Evaporative Air Cooling Manual. Seeley International Pty Ltd, Adelaide, South Australia. ACN 054 687 035. As the policy of the company is one of continuous product improvement, all specifications are subject to change without notice. Seeley International (Americas) Phone: 602-353-8066 Fax: 602-353-8070 Toll Free: 1-800-926-6824 www.convairco

Related Products and Documents (Air Conditioner):

Comparable Devices:

Similar Resources:

• Mitsubishi Electric PLA-RP·AA (22 pages) Air-ConditionersIndoor unitOPERATION MANUALFor safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit.BEDIENUNGSHANDBUCHZum sicheren und einwandfreien Gebrauch der Klimaanlage dieses Bedienungshandbuch vor Inbetriebnahmegründlich durchlesen.MANUEL D’UTILISATIONPour une utilisation correcte sans risques …

• EWT SNOWAIR9HE (52 pages) FR ENThe product complies with all the required European product safety, Electromagnetic compatibility and environmental standards. It is fully compliant with the LVD, EMC, RoHS and Eco design directives.©Glen Dimplex. All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing o …

• LG AS-W0964GG1, AS-W1264GG1 (8 pages) Room Air ConditionerSVC MANUAL(Exploded View)MODEL : AS-W0964GG1(S09AM) AS-W1264GG1(S12AM)Internal Use Onlyhttp://biz.lgservice.comCAUTIONBefore Servicing the unit, read the safety precautions in General SVC manual.Only for authorized service personnel. …

• Mitsubishi Mr.Slim PLA-A-AA (18 pages) Air-ConditionersPLA-A·AADeutschNederlandsEspañolItalianoÏÏËÓÈοPortuguêsDanskSvenskaEnglishEspañolINSTALLATION MANUALFor safe and correct use, read this manual and the outdoor unit installation manual thoroughly before installingthe air-conditioner unit.MANUAL DE INSTALACIÓNPara un uso correcto y seguro, lea detalladamente este manual y el manual …

• GE ASV08FK (2 pages) Note: When installing slide-out chassis units in through-the-wall applications, keep louvers free. Do not restrict air flow areas. Fixed chassis units are not suitable for through-the-wall applications.Wall Outlets: All wiring including installation of receptacle must be made in accordance with local electrical codes and regulations. Electrical outlet shoul …

• Kenmore 253 Series (54 pages) RefrigeratorTop MountUse & Care GuideRefrigeradorCongelador SuperiorGuía para su uso y cuidadoRéfrigérateurCompartiments SuperposésGuide d’utilisation et d’entretienSears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8ENGLISHESPAÑOLFRANÇAISwww.sears.com 241864402 (Sept 2007) …

Comments, Questions and Opinions: