Manualios.com

Buffalo WLI-TX4-G54HP Operation & User’s Manual

Buffalo WLI-TX4-G54HP Manual Online:

4.65, 2474 votes
Buffalo WLI-TX4-G54HP User Manual
Buffalo WLI-TX4-G54HP User Guide
Buffalo WLI-TX4-G54HP Online Manual

Text of Buffalo WLI-TX4-G54HP User Guide:

  • Buffalo WLI-TX4-G54HP, 17 ◗ Multiple Client Support - allows the built-in 4 port switch to be connected to multiple clients. Disabling this limits the Ethernet Converter to use with only one client device at a time. ◗ SSID - The SSID is the name of the wireless network the Ethernet Converter is to connect to. Use the same SSID as your router/access point. It can be typed in manually or it can be searched for by pressing the 'Search' button. ◗ Wireless Network Type - Choose between Infrastructure (Access Point Based) or Ad-hoc (Client to Client). ◗ Wireless Channel - The channe

  • 24 FCC Compliance Statement - This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. R&TTE Compliance Statement - This equipment complies with all the

  • 11 Once your computer has a Static IP Address of 1.1.1.2, open your web browser and access the web page http://1.1.1.1 by typing it into the 'Address' fi eld and pressing enter (as shown to the right). You will be prompted for a username and password. By default, the username is root and there is no password. After entering the user name, press the OK button.

  • Buffalo WLI-TX4-G54HP, 2 Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 AOSS Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Manual Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Ethernet Converter Manager . . . . . . . . . . . . . . . . . . . . . . . . 6 Confi guration without Software . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Web-based Confi guration . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Advanced Confi guration . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Wireless Settings. . .

  • Buffalo WLI-TX4-G54HP, 3 Congratulations on your purchase! Your new High Power Wireless Ethernet Converter allows you to connect any device with an Ethernet port to a wireless network. AOSS makes for effortless setup and our Turbo G High Power technology gives superb range and speed. Contents • Wireless Ethernet Converter • Ethernet Converter Utility CD-ROM • 7ft. Ethernet Cable • AC Adapter • Quick Setup Guide • Warranty Statement If any items are missing, please contact the reseller from whom you purchased this product. System Requirements • Desktop or Notebook computer

  • 18 ◗ Wireless Mode - The wireless mode only applies to Ad-hoc connections. If the Ethernet Converter is making an Ad-hoc connection with an 802.11b client, then select '802.11b' from the drop down menu. If an 802.11g client is connecting to the Ethernet Converter then select the 'Auto - 802.11g / 802.11b' option. ◗ Basic Rates - The

  • 22 Firmware Update - This page contains settings that up- date the Ethernet Converter's Firmware. ◗ Updating the Ethernet Converter's fi rmware is a pro- cedure where a user downloads a newer fi rmware from the Buffalo Technology Web Site and applies it to the Ethernet Converter. New fi rmware fi les contain new software code that adds bug fi xes, additional fe

  • Buffalo WLI-TX4-G54HP, 4 If your Wireless Router/Access Point supports AOSS, then you may let AOSS confi gure your wireless network for you. • Plug the Ethernet Converter's AC Adapter into the power connector and to a wall outlet. It will take about 30 seconds to power up. Make sure that the wireless router/ access point is powered on as well. • Hold in the AOSS button on the wireless router/access point for 3 seconds. • Hold in the AOSS button on the Ethernet adaptor for 3 seconds. AOSS will take about a minute to confi gure your wireless network. When fi nished, the AOSS

  • Buffalo WLI-TX4-G54HP, 15 The Ethernet Converter confi guration is complete. To continue confi guring advanced set- tings, please skip to the next page. Disconnect the Ethernet Converter from the network connection and power adapter, and move it to the desired location. Plug the Ethernet Converter's LAN port into the wired device that requires the wireless Ethernet Converter (devices could be an XBox, PS2, Home Theater Media Adapter, switch, hub, or another computer system). Plug the AC Adapter into a nearby power outlet and connect the power connector to the Ethernet Converter. Power cycle any devices that are c

  • Buffalo WLI-TX4-G54HP, 25 Warranty    6''"-0 &$)/0-0(:  130%6$5s $0.& 8*5) " 580:&"3 -*.*5&% 8"33"/5: '30. 5)& %"5& 0' 163$)"4& 6''"-0 &$)/0-0(:  8"33"/54 50 5)& 03*(*/"- 163$)"4&3 5)& 130%6$5 (00% 01&3"5*/( $0/%*5*0/ '03 5)& 8"33"/5: 1&3*0% )*4 8

  • Buffalo WLI-TX4-G54HP, 8 The Ethernet Converter Manager will search for all Buffalo Ethernet Converters on your network. The process usually takes less than one minute. Once completed, the Search Results window will appear. Search Results will list all Buffalo Ethernet Converters on the network. If there is more than one Ethernet Converter in the list, then select the Ethernet Converter you would like to confi gure. Press the IP Settings button to continue confi guration. Check the Use DHCP checkbox and press the OK button. The Ethernet Converter will reboot; this proces

  • Buffalo WLI-TX4-G54HP, 19 ◗ Automatic IP Assignment - This setting specifi es the Ethernet Converter to obtain its IP Address from a DHCP server on the network. Consult with your network administrator regarding whether this device should obtain its IP Address from a DHCP Server. ◗ Manual Assignment - This setting specifi es the Ethernet Converter to operate on a specifi c IP Address. This is often referred to as a Static IP Address. If a manual assignment is preferred, then you will be required to enter an appropriate IP Address and Subnet Mask for the Ethernet Converter. ■ N

  • Buffalo WLI-TX4-G54HP, 6 If you have a Windows 98/ME/2000/XP machine with a CD-ROM drive available on your computer network, the Ethernet Converter Manager makes it simple to confi gure the Ethernet Converter. The following steps will guide you through confi guring the Ethernet Converter via the Ethernet Converter Manager. Connect one of the Ethernet Converter's LAN ports to an open port on your network's router, switch or hub with the included network patch cable. If there are no ports available, you can temporarily remove a computer or other connected device and plug the Ethernet Converter to that port. You can plug the Eth

  • Buffalo WLI-TX4-G54HP, 27 Buffalo Technology (Europe), Inc. 176 Buckingham Avenue, Slough, Berkshire, SL1 4RD United Kingdom GENERAL INQUIRIES Email: [email protected] TECHNICAL SUPPORT Technical Support in Europe is available between the hours of 9am-6pm (GMT) Monday to Thursday and 9am-4:30pm (GMT) Friday for this product. Customers in Europe can obtain Technical Support using the following information: E-mail: [email protected] | Web: www.buffalo-technology.com Contact Information - Europe

  • Buffalo WLI-TX4-G54HP, 10 You may also enter the Web-based Confi guration Tool without using the software. This may be necessary to confi gure the converter without the use of a Windows PC. Use this method with Linux, Macintosh, other other non-Windows PCs to access the Web-based Confi guration Tool. Refer to your operating system documentation on how to confi gure a Static IP Address. The Ethernet Converter has an IP Address of 1.1.1.1 by default. You'll need to confi gure the computer to be on the same subnet;

  • Buffalo WLI-TX4-G54HP, 26 Contact Information - North America Buffalo Technology (USA), Inc. 4030 West Braker Lane, Suite 120 Austin, TX 78759-5319 GENERAL INQUIRIES Monday through Friday 8:30am-5:30pm CST Direct: 512-794-8533 | Toll-free: 800-456-9799 | Fax: 512-794-8520 | Email: [email protected] TECHNICAL SUPPORT North American Technical Support by phone is available 24 hours a day, 7 days a week. (USA and Canada). Toll-free: (866) 752-6210 | Email: [email protected]

  • Buffalo WLI-TX4-G54HP, 20 ◗ System Information - This page contains a summary of the Ethernet Converter's settings. Settings cannot be changed from this page. If the Ethernet Converter is obtaining its IP Address from a DHCP server, then a release and renew button will be present at the bottom of the page. Releasing the IP Address will make the Ethernet Converter impossible to confi gure without re- initializing the device or using the Ethernet Converter Manager. ◗ Name and Password - This page contains settings that affect the naming and password protection of the Ethernet Converter. ◗ Ethernet Converter Name - The Ethernet Converter

  • Buffalo WLI-TX4-G54HP, 5 If your wireless router/access point doesn't support AOSS, you'll need to confi gure the access point manually. There are two ways to do this: you can use the Ethernet Converter Manager software if you have a Windows PC on the network (98/ME/2000/XP only), or you may use a web browser. Web browser confi guration may be done with any computer running a recent web browser, including Macintosh and Linux machines. Manual Confi guration

  • Buffalo WLI-TX4-G54HP, 7 Click on Ethernet Converter Manager. The Ethernet Converter Manager software will run. Please select the Search for an Ethernet Converter option from the Edit drop down menu. NOTE: Depending on Windows confi guration, the search may automatically begin, if this is the case then the last step is not required.

  • 14 The SSID in the table will be populated now. Depending on whether or not the wireless network is using WEP Encryption or not, the Encryption Key option may be set to Encrypt or No Encryption. If it is set to No Encryption then you are already connected to the wireless network, and you may skip to the last step on this page. If the Encryption Key option is set to 'Encrypt

  • Buffalo WLI-TX4-G54HP, 9 Search Results will appear. If more than one Ethernet Converter is present, select the proper Ethernet Converter from the list. Then press the Confi gure button. The Ethernet Converter Manager will connect you to the Ethernet Converter's web based confi guration tool. You will be prompted for a username and password. By default, the username is root and there is no password. After entering the user name, press the OK button. Please skip to page 12 to continue confi guration.

  • Buffalo WLI-TX4-G54HP, 23 Troubleshooting Troubleshooting - Below are some common troubleshooting tips: Re-initializing the Ethernet Converter - Re-initializing the Ethernet Converter returns it to default settings. This process is used if you cannot access confi guration anymore, have lost the password to the Ethernet Converter, or desire to return the settings to the factory settings. To re-initialize the device, simply press the black INIT button on the side of the Ethernet Converter for 5 seconds or until the DIAG light becomes red. Allow a minut

  • Buffalo WLI-TX4-G54HP, 16 To access Advanced settings, press the blue Advanced button in the bottom right corner of the Home page. This is the advanced page. On the left, you may choose from Wireless Settings, Network Settings, or Management. When the page fi rst opens, it's at Wireless Settings. Changes on advanced pages are not applied until the Apply button is pressed. Advanced Configuration

Related Products and Documents (Modem):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Welbilt ABM6200 Recipe & instruction booklet welbilt/abm6200-Z7J.pdf 02 May 2023 15 6.77 Mb
2 Palsonic CD3777BT Operating instructions palsonic/cd3777bt-LEK.pdf 19 Dec 2023 5
3 Black Horce Model YAK 55M Instruction manual black-horce-model/yak-55m-7NG.pdf 27 Nov 2023 25
4 BodyCraft BCG 446 Instruction manual bodycraft/bcg-446-3W1.pdf 11 Apr 2023 19 3.06 Mb
5 Vonage VT1005 Quick installation manual vonage/vt1005-P22.pdf 17 Nov 2023 2
6 Canon CLC5151 Copying and mail box manual canon/clc5151-I9B.pdf 20 Sep 2023 468

Similar Resources:

  • H3C

    MSR Series

    (11 pages)
    H3C MSR Router Series Comware 7 OAA Configuration Guide New H3C Technologies Co., Ltd. http://www.h3c.com Software version: MSR-CMW710-R0615 Document version: 6W202-20200321 …
  • 2Wire

    3600HGV

    (82 pages)
    iContentsContents i3800HGV-B Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Connect the Computer to the Gateway . . . . . . . . . . . …
  • Ritron

    DTXM II Series

    (20 pages)
    Rev. 07/14 RITRON DTXM SERIES II DTXM-X60 FAMILY PROGRAMMABLE WIRELESS FM MODEM TRANSCEIVERS VHF/220 MHz/340-400 MHz/UHF 6.25 kHz/12.5 kHz/25 kHz Channels Multiple Protocol …
  • NETGEAR

    DG834Gv4 - 54 Mbps Wireless ADSL Firewall Modem

    (2 pages)
    Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.54 Mbps Wireless ADSL2+ Modem Router with 4-port 10/100 Mbps Switch D …
  • Asus

    DSL-N10E

    (2 pages)
    English1. Connect your devices.2. Before starting ADSL setting procedure, ensure that the ADSL indicator on DSL-N10E top panel become solid.3. In your web browser, key in http://192.168.1.1. In the pop-up window, key in the user name and password (user name/password: admin/admin). The Quick Internet Setup (QIS) wizard appears. * If the QIS web page do …
  • Schmid

    Watson

    (134 pages)
    Watson Ethernet Operating Manual Document Identification Watson-Ethernet-Manual.doc Document Version 3.3-01 Document Revision 2010-01-20 Distribution Customer …

Comments, Questions and Opinions: