Buhler 2595 Operator And Parts Manual
|
Buhler 2595, bühler Allied Front-End Loader - 3 - P4094 Specification Chart NOTE: Specifications are subject to change without notice or obligation. Item Description 2595/2596 REG 2595/2596 TSL 2595S/2596S REG 2595S/2596S TSL A Maximum lift height to pivot pin [in/cm] 145/368 145/368 142/361 142/361 B Maximum lift height under level bucket [in/cm] 135/343 135/343 132/335 132/335 C Clearance with bucket dumped [in/cm] 112/285 112/285 108/274 108/274 D Reach at maximum lift height [in/cm] 29/74 28/71 32/81 32/81 E Maximum dump angle [deg] 48 49 46 48 G Maximum rollback angle [deg] 38 38 38 38 H Digging depth [in/cm] 7.0/18 7.0/18 5.5/14
Buhler 2595, bühler Allied Front-End Loader - 26 - P4094 A yearly inspection of the valve is recommended. However the maintenance intervals on the valve depends on the surrounding environment or if valve spools become stiff. Where temperatures fluctuate from one extreme to another or exposed to high salt the intervals for maintenance should be increased to protect from corrosion. On non-cab tractors mounted with the joystick valve, slip back the boot and clean away any debris. Spray a corrosion resistant lubricant and remount the boot. Replace a torn or cracked boot.
Buhler 2595, bühler Allied Front-End Loader - 17 - P4094 Grapple: The grapple is designed to safely prevent loads (bales, silage) from falling out of the bucket. (Refer to pictorial below for options listed) WARNING Travel at low speeds. Carry loads as low as possible. Avoid sharp turns and uneven terrain. Manure tine kits available. Pre punched tine holes standard on buckets 72" and larger. Grapple for Hay or Silage Standard 2000 series Quick attach brackets (2495-2895) Standard 495-995 Quick attach Optional 95-395 Quick attach Optional factory pre punched grapple
Buhler 2595, bühler Allied Front-End Loader - 35 - P4094 2595 – 2595 S – 2596 – 2596 S Hydraulic Plumbing Assembly Item Part No. Description 2595 2595 S 2596 2596 S 1 Ref. Bucket Cylinder (See cylinder assembly for breakdown) 2 2 2 2 2 Ref. Lift Cylinder (See cylinder assembly for breakdown) 2 2 2 2 3 811434 Hose 3/8 x 30 3/4 - 16 MORB x 3/4 - 16 SWFJIC 2 2 2 2 4 812696 Hose 3/8 x 18 3/4 - 16 SWFJIC x 3/4 - 16 SWFJIC 2 2 2 2 5 811754 Hose 3/8 x 18 3/4 - 16 MO
bühler Allied Front-End Loader - 43 - P4094 Cartridge: Notes: 1. A2 & B2 service ports must be used for bucket cylinders only. 2. Remove plugs from a2 & b2 and replace with item 1(cartridge). Parts List X2264 Item Part No. Qty. 1 813353 Relie
Buhler 2595, bühler Allied Front-End Loader - 14 - P4094 For back grading, either load the bucket and position the heel on the ground or position the bucket at 40° or less below level as shown. Place the valve in the float position and back up slowly. IMPORTANT: Float position must be used to reduce down pressure, otherwise cylinder rod(s) and/or bucket damage could occur. A – Frame: Standard and Heavy Duty A – Frames can be fitted with either spears or pallet forks. - Standard Duty The st
bühler Allied Front-End Loader - 30 - P4094 Trouble Shooting Continued Problem Insufficient lift capacity. Slow leak down. Excessive wear on bottom oil bucket and wear pads. Hydraulic cylinders inoperative. Pump operating continually on
Buhler 2595, bühler Allied Front-End Loader - 20 - P4094 2. Lower attachment level to the ground while engaging float position. Ensure attachment rests firmly on ground with minimal downward pressure. If required extend bucket cylinders to rotate upright rearward. At this stage the pin should have no pressure. Set tractor park brake and remove loader lock pins. Check hydraulic hoses such that they will not get pinched or stretched during removal. WARNING Operate hydraulic controls slowly. Loader will disengage from the mounting kit and may shift if not o
Buhler 2595, bühler Allied Front-End Loader - 13 - P4094 Minimize turning angle and length of run between pile and trailer to increase loading efficiency. Also, place load evenly or centered in the attachment. WARNING Carry the load no higher than necessary to clear the terrain. Turn and brake slowly. Always be sure that loading area is level and on solid ground. Do not raise loader higher then required while dumping. Immediately lower the loader to ground if the tractor becomes unstable. Leave material, which drifts ove
Buhler 2595, bühler Allied Front-End Loader - 12 - P4094 All Buhler-Allied hydraulic valves are self-centering and return to neutral from all positions except float. The float or detent spool is only to be used on the boom circuit. This position allows the oil to freely flow through the valve so the lift cylinders can extend or retract. It can be engaged by slightly pushing control beyond full lower. Float will allow for the loader to lower and rise as the attachment follows the ground contours
Buhler 2595, Buhler Manufacturing “ a partnership” 1201 Regent Ave. W. Winnipeg, MB. R2C 3B2 Ph.: (204) 661-8711 Fax: (204) 654-2503 www.buhler.com Printed in Canada Allied Division 1201 Regent Ave. W. Box 1003 Winnipeg, MB R2C 3B2 Ph.: (204) 661-8711 Fax: (204) 654-2503 Farm King Division 301 Mountain Street S. Morden, MB R6M 1X7 Ph.: (204) 822-4467 Fax: (204) 822-6348 Inland Division 675 Washington Ave. Winnipeg, MB R2K 1M4 Ph: (204) 667-7854 Fax: (204) 669-2599 B.I.I. Division 1330 43 rd Street N.W. Fargo, ND 58102 Ph: (701) 282-7014 Fax: (701) 282-5865 B.C., Abbo
bühler Allied Front-End Loader - 39 - P4094 2595 TSL – 2595 S TSL – 2596 TSL – 2596 S TSL Hydraulic Plumbing Assembly Item Part No. Description 2595 2595 S 2596 2596 S 1 Ref. Bucket Cylinder (See cylinder assembly for breakdown) 2 2 2 2 2 Ref. Lift Cylinder (See cylinder assembly for breakdown) 2 2 2 2 3 114605 Hose 3/8 x 24 3/4 -
Buhler 2595, bühler Allied Front-End Loader - 9 - P4094 The following pictorials indicate important precautions to be used during the operation of the loader. WARNING WARNING WARNING FALLING HAZARD To prevent serious injury or death: Do not lift, carry or allow anyone to ride on or work from any portion of loader. HIGH PRESSURE FLUID To prevent serious injury or death: Relieve pressure on system before repairing or adjusting or disconnecting. Wear proper hand and eye protection when searching for leaks. Use wood or cardboard instead of hands. Keep all components in g
Buhler 2595, bühler Allied Front-End Loader - 42 - P4094 True Self Leveling Manifold (2595): Notes: 1. Additional hardware supplied to suit 2795 installation. 2. Torque all fittings and hoses prior to operating loader. Ensure hoses do not rub or pinch during loader operation. Ty-rap (item 13) supplied; use as required. Parts list for X2265 Item Part No. Description Qty 1 115196 3/8 x 56 Hose 3/4 Swfjic x Swfjic 1 2 811706 3/8 x 48 Hose 3/4 Swfj
Buhler 2595, bühler Allied Front-End Loader - 44 - P4094 Hydraulic Fitting Torques: (ft-lbs) (NM) (ft-lbs) (NM) -04 7/16-20 14-16 20-22 10-11 13-15 -05 1/2-20 18-20 24-27 13-15 18-20 -06 9/16-18 24-26 33-35 17-19 23-26 -08 3/4-16 50-60 68-78 34-38 47-52 -10 7/8-14 72-80 98-110 50-56 69-76 -12 1-1/16-12 125-135 170-183 70-78 96-106 -14 1-3/16-12 160-180 215-245 80-90 110-122 -16 1-5/16-12 200-220 270-300 94-104 127-141 -20 1-5/8-12 210-280 285-380 124-138 169-188 -24 1-7/8-12 270-360 370-490 156-173 212-235 Dash Siz
Buhler 2595, PRINTED IN CANADA WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications. Buhler Manufacturing’s obligations under this warranty shall be limited to the repair or exchange, at Buhler Manufacturing’s option, of any Buhler Manufacturing product or part which proves to be defective as provided. Buhler Manufacturing reserves the right to either inspect the product at the buyer’s location or have it retu
Zanussi FJ 1214 Washer Instruction booklet
FJ 1214 |
Alliance Laundry Systems 39239R4 Washer Installation manual
39239R4 |
Indesit IWD 5145 Washer User manual manual
IWD 5145 |
THOMSON WTT6130I Washer User manual manual
WTT6130I |
Buhler 595 Washer Assembly, operator's and parts manual
595 |
Haier HWM90-7288 Washer Operation & user’s manual
HWM90-7288 |
Whirlpool MHW7000XR1 Washer Use & care manual
MHW7000XR1 |
GE GTWP2000FWW Washer Energy manual
GTWP2000FWW |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | LG | US730 | Guía del usuario | lg/us730-828.pdf | 16 Sep 2023 | 222 | |
2 | SuddenLink | connectedhome | Operation & user’s manual | suddenlink/connectedhome-368.pdf | 25 May 2023 | 29 | |
3 | Burnham | Series 2B | Installation & service instructions manual | burnham/series-2b-426.pdf | 25 Oct 2022 | 52 | 6.4 Mb |
4 | Estate Slide | E-SL 450 Series | Instruction manual | estate-slide/e-sl-450-series-918.pdf | 31 Oct 2023 | 19 | |
5 | QNO | QVF7411 | Operation & user’s manual | qno/qvf7411-619.pdf | 10 Apr 2023 | 268 | |
6 | Moffat | Turbofan E35 | Specifications | moffat/turbofan-e35-D78.pdf | 08 Sep 2022 | 2 |
Indesit
1GBEnglish, 1GBWASHING MACHINEContentsInstallation, 2-3Unpacking and levellingConnecting the electricity and water suppliesThe first wash cycleTechnical dataDescription of the washing machine, 4-5Control panelDisplayRunning a wash cycle, 6Wash cycles and options, 7Table of programmes and wash cyclesWash optionsDetergents and laundry, 8Detergent dispenser dra …
PWE 7127 W(72 pages) |
GE
ge.com175D1807P476 49-90207 05-05 JRWashersSafety Instructions . . . . . . . . . . . . 2, 3Operating InstructionsControl Panels . . . . . . . . . . . . . . . . 4–5Control Settings . . . . . . . . . . . . . . . . . .6Fabric Care Labels . . . . . . . . . . . . . . .11Features . . . . . . . . . . . . . . . . . . . . . .7, 8Loading and Using the Washer . …
GBVH6260(24 pages) |
Maytag
Maytag® Performance Series Front Load Washer MHWE200XW DIMENSIONS Depth 30 1/2 Inches Height 36 Inches Width 27 Inches . SPECIFICATIONS Drum Material Stainless Steel wash basket Washer Top Finish Powercoat-on-steel Spillsaver™ top 3-tray dispenser drawer ( Detergent, bleach and fabric softener) Temperature Control …
Performance MHWE200X(2 pages) |
Miele
Operating instructionsWasher-disinfectorPG 8591To prevent accidents and machine damage,read these instructions before installation oruse.en - CAM.-Nr. 10 607 932
…
PG 8591(152 pages) |
Maytag
TOP AND CABINET PARTS110−09 Printed in U.S.A. (drd) (psw)Part No. W10140756 Rev. AAUTOMATICWASHERFor Models: MHWZ600TW00, MHWZ600TB00, MHWZ600TK00(White/Chrome) (Black/Chrome) (Pacific Blue)
…
MHWZ600TB00(9 pages) |
Gibson
9. Push in the cycle selector knob and turn itclockwise to the desired wash cycle.10. Start the washer by closing the door andpulling out the cycle selector knob. Thewasher will not operate with the door open.As a safety measure, the door willautomatically lock during the entire washcycle.• To stop the washer, push in the cycleselector knob.• To change …
GTF1040CS0(4 pages) |
iStarUSA Chassis D-300-PFS#6993FF: D-300-PFS Chassis Manual D-300-PFS, 3 |
Thermaltronics Soldering Gun TMT-5000SThermaltronics Soldering Gun TMT-5000S Operation & user’s manual TMT-5000S, 7 |
Epson Desktop Equity 386SX/20 PLUSDesktop Operation & user’s manual (Epson Equity 386SX/20 PLUS) Equity 386SX/20 PLUS, 130 |
Roland Monitor CS-10CS-10 Owner's manual - 9W2125 CS-10, 6 |
Powermate Portable Generator PM0675700.04Manual: Powermate PM0675700.04 (4V5CF1, Upd.25.01.2024) PM0675700.04, 12 |
M-Audio Control Units MacManM-Audio MacMan User Guide (Manual ), @FZ53R3 MacMan, 3 |
Philips TV 27PT643R#GD6BEK 27PT643R: Philips TV Owner Documentation 27PT643R, 44 |
BETCO Floor Machine PREDATOR SERIESEBETCO PREDATOR SERIESE Guide (Operator and parts manual), @V9G325 PREDATOR SERIESE, 32 |
Globalsat GPS TR-150TR-150 Operation & user’s manual - 7X1Q72 TR-150, 37 |
ID Lock Door locks 101 seriesID Lock 101 series Door locks Operational manual 101 series, 9 |
ID Tech Card Reader ViVOpay 4800Card Reader PDF Operation & user’s manual ViVOpay 4800, 18 |
Chicago Electric Planer 9106291062 (Planer ePDF Manual, #1M4J7B) 91062, 17 |