Comet Labs WRM54 Operation & User’s Manual

Text of Comet Labs WRM54 User Guide:

• 79 6. The TCP/IP protocol shall be listed in the Network window. Click OK to complete the install procedure and restart your PC to enable the TCP/IP protocol. A.2 Set TCP/IP Protocol for Working with NAT Router 1. Click Start button and choose Settings, then click Control Panel. 2. Double click Network icon. Select the TCP/IP line that has been associated to y

• Comet Labs WRM54, 57 Routing Tables allow you to determine which physical interface address to use for outgoing IP data grams. If you have more than one routers and subnets, you will need to enable routing table to allow packets to find proper routing path and allow different subnets to communicate with each other.Routing Table settings are settings used to setup the functions of static and dynamic routing. Dynamic Routing Routing Information Protocol (RIP) will exchange information about destinations for computing routes throughout the network. Please select RIPv2 only if you have d

• Comet Labs WRM54, 53 To fill some SMTP server's authentication requirement, you may need to input Username and Password that offered by your ISP. Log type Please select the activities that should be shown on log. 4.7.3 Dynamic DNS To host your server on a changing IP address, you have to use dynamic domain name service (DDNS). So that anyone wishing to reach your host only needs to know the name of it. Dynamic DNS will map the name of your host to your current IP address, which changes each time you connect your Internet service provider. Before you enable Dynamic DNS, you need to register an account on one of these Dynamic DNS

• Comet Labs WRM54, 9 performance. Figure 2-3 Setup of LAN and WAN connections for this product. 3. Setup ADSL connection Prepare an Ethernet cable for connecting this product to your cable/xDSL modem or Ethernet backbone. Figure 2-3 illustrates the WAN connection. 4. Connecting this product with your printer (optional) Use the printer cable to connect your printer to the printer port of this product. (Optional) 5. Power on Connecting the power cord to power inlet and turning the power switch on, this product will automatically enter the self-test phase. When it is in the self-test phase, the in

• Comet Labs WRM54, 119 A A A p p p p p p e e e n n n d d d i i i x x x C C C 8 8 8 0 0 0 2 2 2 . . . 1 1 1 x x x S S S e e e t t t t t t i i i n n n g g g Figure 1: Testing Environment (Use Windows 2000 Radius Server) 1 Equipment Details PC1: Microsoft Windows XP Professional without Service Pack 1. D-Link DWL-650+ wireless LAN adapter Driver version: 3.0.5.0 (Driver date: 03.05.2003) PC2: Microsoft Windows XP Professional with Service Pack 1a. Z-Com XI-725 wireless LAN USB adapter Driver version: 1.7.29.0 (Driver date: 10.20.2001) Authentication Server: Windows 2000 RADIUS server with Service Pack 3 and Hot Fix Q31366

• Comet Labs WRM54, 18 This page is primary to enable this product to work properly. The setting items and the web appearance depend on the WAN type. Choose correct WAN type before you start. 1. LAN IP Address: the local IP address of this device. The computers on your network must use the LAN IP address of your product as their Default Gateway. You can change it if necessary. 2. WAN Type: WAN connection type of your ISP. You can click Change button to choose a correct one from the following five options: A. Ethernet Over ATM (RFC 1483 Bridged) without NAT B. Ethernet Over ATM (RFC 1483 Bridged) with NAT C.

• Comet Labs WRM54, 56 Example: 1. This device will response to SNMP client which’s get community is set as “public” 2. This device will response to SNMP client which’s set community is set as “private” 3. This device will response request from both LAN and WAN 4. This device will send SNMP Trap message to 192.168.0.33 (Use SNMP Version V2c) 4.7.5 Routing Table

• Comet Labs WRM54, 4 C C C h h h a a a p p p t t t e e e r r r 1 1 1 I I I n n n t t t r r r o o o d d d u u u c c c t t t i i i o o o n n n Congratulations on your purchase of this outstanding ADSL Wireless Broadband Router. This product is specifically designed for Small Office and Home Office needs. It provides a complete SOHO solution for Internet surfing, and is easy to configure and operate even for non-technical users. Instructions for installing and configuring this product can be found in this manual. Before you install and use this product, please read this manual carefully for fully exploiting

• Comet Labs WRM54, 81 B. Configure IP manually a. Select Specify an IP address in the IP Address tab. The default IP address of this product is 192.168.0.254. So please use 192.168.0.xxx (xxx is between 1 and 253) for IP Address field and 255.255.255.0 for Subnet Mask field. b. In the Gateway tab, add the IP address of this product (default IP is 192.168.0.254) in the New gateway field and click Add button.

• Comet Labs WRM54, 86 Right-click [IP Security Policies on Local Computer], and click [Create IP Security Policy]. Click the [Next] button, enter your policy’s name (Here it is to_vpn_router). Then, click [Next]. Introduction Deselect the [Activate the default response rule] check box, and click [Next] button. Click [Finish] button, make sure [Edit] check box is checked.

• Comet Labs WRM54, 5 correctly. z Statistics of WAN Supported Enables you to monitor inbound and outbound packets Wireless functions z High speed for wireless LAN connection Up to 54Mbps data rate by incorporating Orthogonal Frequency Division Multiplexing (OFDM). z Roaming provides seamless roaming within the IEEE 802.11b(11M) and IEEE 802.11g(54M) WLAN infrastructure. z IEEE 802.11b compatible (11M) Allowing inter-operation among multiple vendors. z IEEE 802.11g compatible (54M) Allowing inter-operation among multiple vendors. z Auto fallback 54M, 48M, 36M, 24M, 22M, 18M, 12M, 11M, 6M, 5.5M, 2M, 1Mbps data rate with auto fallback in 802.11g m

• Comet Labs WRM54, 35 Example 1: (1.2.3.100-1.2.3.149) They are allow to send mail (port 25), receive mail (port 110), and browse the Internet (port 80) (1.2.3.10-1.2.3.20) They can do everything (block nothing) Others are all blocked. Example 2:

• 66 2. Click the Details item: 3. Choose the “PRTmate: (All-in-1)” from the list attached at the Print To item. Be sure that the Printer Driver item is configured to the correct driver of your server printer. 4. Click on the button of Port Settings:

• Comet Labs WRM54, 115 VPN Settings - Tunnel 1 – IKE Tunnel:1 Local Subnet:192.168.0.0 Local Netmask:255.255.255.0 Remote Subnet:192.168.1.1 Remote Netmask:255.255.255.255 Remote Gateway:192.168.1.1 Pre-shared Key: my-preshare-key

• 13 C C C h h h a a a p p p t t t e e e r r r 4 4 4 C C C o o o n n n f f f i i i g g g u u u r r r i i i n n n g g g A A A D D D S S S L L L W W W i i i r r r e e e l l l e e e s s s s s s B B B r r r o o o a a a d d d b b b a a a n n n d d d R R R o o o u u u t t t e e e r r r This product provides Web based

• Comet Labs WRM54, 63 4.8.4 Reset to default You can also reset this product to factory default by clicking the Reset to default button. 4.8.5 Reboot You can also reboot this product by clicking the Reboot button. 4.8.6 Miscellaneous Items

• Comet Labs WRM54, 37 (192.168.0.100-192.168.0.149) They are allowed to send mail (port 25), receive mail (port 110), and browse Internet (port 80); port 53 (DNS) is necessary to resolve the domain name. (192.168.0.10-192.168.0.20) They can do everything (block nothing) Others are all blocked. Example 2:

• Comet Labs WRM54, 55 In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to give a user the capability to remotely manage a computer network by polling and setting terminal values and monitoring network events. Enable SNMP You must check either Local or Remote or both to enable SNMP function. If Local is checked, this device will response request from LAN. If Remote is checked, this device will response request from WAN. Get Community Setting the community of GetRequest your device will response. Se

Related Products and Documents (Wireless Router):

Comparable Devices:

Similar Resources:

• D-Link DAP-1325 (103 pages) QUICK INSTALLATION GUIDEDAP-1325Quick Installation GuideInstallationsanleitung Guide d’installation rapide Guía de instalación rápida Guida di installazione di QuickSnelinstallatiegids Skrócony podręcznik instalacji Stručná instalační příručka Gyors telepítési útmutató HurtiginstalleringsguideHurtig installationsvejledning Pika-asennusopas …

• Zte MF91D (131 pages) 1ZTE MF91DQuick GuideZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057Tel: +86-755-26779999 URL: http://www.zte.com.cn E-mail: [email protected] …

• NETGEAR WNA3100 - Wireless-N 300 USB Adapter (2 pages) )NSTALLATION'UIDEWireless-N 300 USB Adapter WNA3100This guide explains Express installation with the NETGEAR Smart Wizard. Note: For help with custom installation, see the User Manual on the Resource CD.Estimated completion time: 10 minutes. Package ContentsWireless-N 300 USB AdapterUSB cable with adapter cradleResource CDStart HereFirst, install the …

• Edimax BR-6504n (2 pages) www.edimax.comEDIMAX TECHNOLOGY CO., LTD.IEEE802.11n Draft 2.0Wireless Broadband RouterBR-6504nU.K.Edimax Technology (UK) Ltd.TEL: +44-845-1238307FAX: +44-845-1238306 [email protected] Technology EuropeB.V. SP. Z O.O.Tel: +48-22-6079-480Fax: [email protected] Computer CompanyTEL: +1-408-496-1105FAX: +1-408-980-1530 sales@ …

• ViewSonic PJD5123 (2 pages) VERSATILE PRESENTATIONS ANYWHEREPJD5123LIGHT, BRIGHT AND PORTABLE PROJECTOR120HZ AND 3D-READYThe ViewSonic® PJD5123 is a high-performance SVGA 800x600 DLP® projector with 2700 ANSI lumens and 3000:1 contrast ratio. With new slim design at only 3.2 inches high, makes it ideal to move from room to room on the campus or throughout the office. This projector …

• Comnet NWK7 (9 pages) INS_NW7_NW7E_QS_REV– 07/7/15 PAGE 1QUICK START GUIDE INDUSTRIAL OUTDOOR HIGH THROUGHPUT 802.11A/N WIRELESS ETHERNET KITThank you for purchasing NetWave® from ComNet. This quick start guide is designed to walk you through installation. This guide applies to the following models:NWK7: Industrial Multipoint, FCC Version (Includes NWK7_AP and NWK7_CL)NWK …

Comments, Questions and Opinions: