C*Pix SDC2000 Operation & User’s Manual

Text of C*Pix SDC2000 User Guide:

• C*Pix SDC2000, Electromagnetic Compatibility Notice..........................................................................................................2 FCC Notice..................................................................................................................................................2 Welcome........................................................................................................................................................2 Getting Started..............................................................................................................................................3 Contents of package......

• C*Pix SDC2000, Electromagnetic Compatibility Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired  operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for  compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits

• C*Pix SDC2000, •  Do not scratch hard objects against the Lens, Status LCD Panel, or Viewfinder. •  If the Status LCD Panel is damaged, do not touch it. •  Condensation is a problem when bringing cold equipment into a warm room. Try to put the camera  in a plastic bag so condensation forms on the outside of the bag. Important: Do not connect camera to PC before drivers are installed. Go to page 7 for more  information. Getting Started Contents of package •  C*Pix SDC2000 Digital Camera  •  Installation CD (

• C*Pix SDC2000, Powering Up Battery Installation NOTE: In addition to inserting batteries, the camera can also be powered by connecting the  enclosed USB cable to your computer. Be aware that if you use the USB cable connection,  images taken will be deleted when the camera is disconnected from PC. 1.  On the back of your camera, slide the compartment cover to open. 2.  Install 3-AAA alkaline batteries (not included) into the battery compartment. See figure below. 3.  Make sure the battery polarities are correctly o

• C*Pix SDC2000, Powering Up Battery Installation NOTE:In addition to inserting batteries, the camera can also be powered by connecting the  enclosed USB cable to your computer.Be aware that if you use the USB cable connection,  images taken will be deleted when the camera is disconnected from PC. 1.  On the back of your camera, slide the compartment cover to open. 2.  Install 3-AAA alkaline batteries(not included) into the battery compartment. See figure below. 3.  Make sure the battery polarities are correctly orient

• C*Pix SDC2000, Taking Pictures Selecting Resolution The camera defaults to High Resolution (CIF) mode . To select low resolution (QCIF): 1.  Press Mode button repeatedly until is shown on the LCD panel. 2.  Press Shutter button to confirm your selection and "80" will appear on the LCD panel, indicating  that a maximum of 80 photos can be taken with low resolution. NOTE: After taking a few images of low resolution, if you want to switch back to high resolution: (1)  Press Mode button until appears on the LCD panel (2) Press S

• Changing Capture Modes Continuous Mode 1.  Press Mode button until is shown on the LCD panel 2.  Hold down the Shutter button to take images continuously until the frame count goes down to 00. NOTE: In Continuous mode, 6 images will be taken in one second. Self-Timer 1.  Press Mode button until appears on the LCD panel 2.  Press Shutter button. A be

• C*Pix SDC2000, 2.  Select number 1 on the setup screen to install the Arcsoft software 3.  Change Destination Folder if necessary 4.  Select components to install 5.  Change program folder name if necessary 6.  Click Finish button to complete Setup Install camera drivers: 1.  Select number 2 on the setup screen to install the camera drivers. 2.  Click Finish button to complete Setup and restart your computer 3.  After your computer is restarted, connect the camera and computer with the USB cable and the  computer will recognize the camera. Note: • The installed camera drivers may conflict other USB devices in your computer system. • N

• C*Pix SDC2000, 7.  You may edit the photo with the tools in PhotoStudio and then save it by clicking File > Save from  the pull-down menu. NOTE: If you want to know more about PhotoStudio, consult its on-line help by clicking "?" icon or "Help" on the pull-down menu or visit www.arcsoft.com. Downloading Images Taken in Continuous Mode as Videos The My DSC application program can transfer your images taken in Continuous Mode to AVI (video) format. 1.  Take some images in Continuous Mode with the digital camera. NOTE: It

• C*Pix SDC2000, 7.  Enter the filename and click Save button and an AVI file will be saved. Note: Simply disregard what is in the "Save as type" field. Tip: •  To change the video playback speed, change the AVI frame rate. The default value of frame  rate is 6. Setting it to a larger value results in faster playback, while a small value results in slower  playback. 8.  Locate the saved AVI file. Double-click to play the movie. Note: An application for playing the AVI  f

• C*Pix SDC2000, 7.  Enter the filename and click Save button and an AVI file will be saved. Note: Simply disregard what is in the "Save as type" field. Tip: •  To change the video playback speed, change the AVI frame rate. The default value of frame  rate is 6. Setting it to a larger value results in faster playback, while a small value results in slower  playback. 8.  Locate the saved AVI file. Double-click to play the movie. Note: An application for playing the AVI  file, which is not provided in this camera packag

• C*Pix SDC2000, 4.  Click File > Set Capture File from the pull-down menu 5.  Enter the filename for the video to be captured and click Open button. Make sure to enter avi as  the file extension 6.  Keep the default value of 1 MBytes in the Capture file size field and click OK button. 7.  Click Capture > Start Capture from the pull-down menu 8.  Select OK button to start video capture 9.  The time elapsed of the video capture is shown at the bottom of the screen 10. When video capture is finish

• C*Pix SDC2000, Using other Arcsoft Software PhotoPrinter NOTE: The graphics shown are based on the user interface in Windows 98SE. 1.  To open PhotoPrinter, search through Start > Programs >SDC2000 Digital Camera Suite and  ` click PhotoPrinter 2000 Pro icon 2.  To print images from your digital camera, click get photo icon on the layout window, then click  acquire photo icon on the get photo window. 3.  If you want to print a photo already on your hard disk or other storage medium, click add photo �

• C*Pix SDC2000, 3.  Click 2 Get photo icon on the main screen to select a photo. 4.  To select a photo from your digital camera, click Acquire icon on the Get Photo window. 5.  If you want to select a photo already on your hard disk or other storage medium, click Open icon  on Get Photo window. 6.  You may modify the image with the available functions: •  Click 3 Fine-Tune icon to make changes to the inserted photos. •  Click 4 Add Text icon to add text to your project. •  Click 5 Print Preview icon to view/change the print settings for optimal printing.�

• C*Pix SDC2000, Installing Arcsoft Software on Mac 1.  To install Arcsoft software, e.g. PhotoStudio, double-click the PhotoStudio 2000 folder at the root  level of the CD-ROM 2.  Inside the PhotoStudio 2000 folder, double-click on the folder of your desired language e.g. English 3.  Inside the folder of your desired language, double-click the PhotoStudio Installer icon and follow  instructions on screen 4.  Click the Accept button to accept the License Agreement 5.  Select the Install Location and click Install butt

• NOTE: If you want to find out more about PhotoStudio, consult its on-line help by clicking the "?" icon  or "Help > Index" on the pull-down menu. Using PhotoPrinter on Mac 1.  Locate the PhotoPrinter application program icon on your computer hard disk (should this be disk  or "drive"?) and double-click on it to start the program 2.  Click g

• Uninstalling Arcsoft software 1.  Search through Start > Programs > SDC2000 Digital Camera Suite and click Uninstall icon 2.  Follow any on-screen instructions. Note: For Mac users, simply drag-and-drop the folder in which the application is installed onto the Trash  icon on the desktop. Product Specifications Resolution High: 352 x 288 (CIF) Low: 176

• Uninstalling Arcsoft software 1.  Search through Start > Programs > SDC2000 Digital Camera Suite and click Uninstall icon 2.  Follow any on-screen instructions. Note: For Mac users, simply drag-and-drop the folder in which the application is installed onto the Trash  icon on the desktop. Product Specifications Resolution High: 352 x 288 (CIF) Low: 176 x 144

• C*Pix SDC2000, 4.  Why would I get fuzzy, unclear photos? There might be some movements of your body or hands when taking photos. Hold the camera  steadily with both hands. Use the first finger of your right hand to press the shutter. Stand on solid  ground. Do not move or run when pressing the shutter. Even tiny movements will result in fuzzy  photos. 5.  Why would I get some blurry areas in a photo? You may have covered part of the lens when taking the photo. Or there may be some grease on  the lens. Remove it with a dry and soft cl

Related Products and Documents (Digital Camera):

Comparable Devices:

Similar Resources:

• Sony DSC-TX30 (643 pages) DSC-TX30©2013 Sony Corporation Printed in China4-456-210-51(1)DSC-TX30Digital Still Camera / Instruction Manual GBAppareil photo numérique / Mode d’emploi FRFotocamera digitale / Istruzioni per l’uso ITCámara fotografía digital / Manual de instrucciones ESCâmara fotográfica digital / Manual de instruções PTDigitale Fotokamera / Gebrauchsan …

• Tattile Vega1 Series (38 pages) Tattile srl - Via Gaetano Donizetti, 1 - 25030 Mairano (BS) Italy - Tel. +39 030 97000 - Fax. +39 030 97001 - [email protected] VEGA1SeriesAutomaticNumberPlateReaderOriginalInstructionsforInstallationDocumentnumber:RMM_00053Rev.02 …

• Epson Stylus Color 3000 (1 pages) Epson America, Inc. October 2001 Epson and Stylus are registered trademarks of Seiko Epson Corporation. Other trademarks are the property of their respective owners. EPSON® Stylus® Color 3000 At-A-Glance The EPSON Stylus Color is the ultimate full-bleed, high-performance color comping device! Ideal for home and/or freelance graphic designers or graphic a …

• TP-Link Kasa Cam Outdoor (54 pages) Quick Installation GuideKasa Cam Outdoor7106508316 REV1.0.2www.tp-link.com Specications are subject to change without notice. TP-Link is registered trademark of TP-Link Technologies Co, Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.No part of the specications may be reproduced in any form or by …

• TRENDnet TV-IP212 - Internet Camera Server (3 pages) • Built-in USB port allows you to store still image directly onto a USB flash or hard drive*• Supports TCP/IP networking, SMTP Email, HTTP, Samba and other Internet protocols• High quality MPEG-4 and MJPEG video recording with up to 30 frames per second• Supports 3GPP live video viewing via 3G mobile phone ** • Hear and talk to people in your camer …

• GeoVision GV-BX110D (293 pages) User's ManualGV-IPCam H.264Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use. …

Comments, Questions and Opinions: