Manualios.com

Calibre UK VANTAGE-HD Operator's Manual

Calibre UK VANTAGE-HD Manual Online:

4.85, 2201 votes
Calibre UK VANTAGE-HD User Manual
Calibre UK VANTAGE-HD User Guide
Calibre UK VANTAGE-HD Online Manual

Text of Calibre UK VANTAGE-HD User Guide:

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 15 of 30 Picture Settings A submenu of picture control functions including Color temperature To select the color temperature of the incoming material. Options are Warm, Neutral, cold. With a 7200K display device (a typical projector or LCD set to neutral) these correspond to nominal settings of 6500K, 7200K & 9300K respectively. For neutral color temperature response, that is, to leave the response of the program material unmodified, select Neutral, this is the default setting Input gamma mode Used to re-map an input gamma to a different output gamma setting.

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 12 of 30 SELECTING AN INPUT 5.1. Via the OSD Now you can choose from the input channels you have defined by scrolling up to the Input Selection menu. Here you will find listed those input channels you have defined. Press the right navi-key to enter the Input Selection menu, then scroll to the input you wish to view or whose configuration you wish to alter. Press OK to select it. 5.2. Via the Front Panel Alternatively you can step through the defined input chann

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 1 of 30 PRODUCT DESCRIPTION 1.1. Product Overview Vantage-HD is a state of the art digital image processor which provides market leading HD& SD per-pixel multiple Iow-angle aperture-adjusted motion-adaptive de-interlacing and automatic film pull-down correction for 3:2, 2:2 and non-standard and broken cadences, significantly outperforming the capabilities of benchmark competitor products. Vantage-HD features studio-grade image processing algorithms from Teranex for the very best scaling, film and video noise reduction, MPEG

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 6 of 30 Picture 2 Select Display Device Resolution 10 Select Output Frame Rate Select the Frame Rate option on the menu. This determines whether the output of Vantage-HD remains at a constant 59.94Hz, constant 50Hz, or automatically switches between the two depending on the type of incoming signal being displayed Auto mode gives best motion performance in a viewing scenario where you are looking at content which may be 59.94Hz or 50Hz (North America and anywhere using the NTSC system usually runs at 59.94Hz, Europe and anywhere using PAL or SECAM usually runs at 50Hz; ther

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 19 of 30 CONFIGURATION MENU 9.1. Introduction The Configuration Menu allows the user to customize the "look and feel" of the Vantage-HD user interface Language Allows selection of the language for the OSD, current options are English (American) - default English (British) Francais Deutsch Menu Colors Allows selection of the color scheme for the OSD, options are Blue - default Gray Green Transparent Menu Allows the displayed image to be viewed through the OSD menu by making the OSD semi-transpa

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 11 of 30 FREEING INPUT CHANNELS 4.1. Freeing a Video Channel Should you wish to disable a video input, you may do so by re-selecting that video channel from the Input Connections menu, selecting the Disable Channel function and then selecting Yes from the warning message which appears. Disabling a video input channel not only removes it from the input selections list, it also erases its name and de-allocates its associated audio channel. Note: If all possible input channels are disabled, the

  • Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 2 of 30 IF THE REMOTE CONTROL IS TO BE LEFT UNUSED FOR AN EXTENDED PERIOD OF TIME PLEASE REMOVE THE BATTERIES TO PREVENT POSSIBLE DAMAGE CAUSED BY LEAKING 1.6. Serial Control Vantage-HD has a serial port which allows for the unit to be controlled via an integrated home contr

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 29 of 30 HDCP Handshake delays HDMI inputs can suffer from delays in locking to a new input source, or a source which has just changed resolution or format. These delays are handshake delays relate to the inherent HDMI-HDCP handshake period between your display device and your source equipment. This is unfortunately outside of the control of Vantage- HD which simply relays HDCP information between display and source

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 18 of 30 INFORMATION MENU 8.1. Introduction The Information Menu provides information about the version and status of your Vantage- HD. Information shown is Vantage-HD Information Vantage revision the version number of the control software and user menu/user controls functionality in your Vantage-HD. Input Source Displays details of the physical the video and audio connection channel presently selected Input Format Displays approximate details of the detected input video signal including vertical frequency (refresh rate), horizontal frequency (line rate) a

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 21 of 30 OUTPUT MODE DETAILS 10.1. Introduction The following output modes are supported by Vantage-HD Resolution H Freq V Freq H act H Tot HS HBP V act V Tot VS VBP 640×480 31.469 59.94 640 800 96 48 480 525 2 33 640×480 26.25 50 640 800 96 48 480 525 2 33 800×600 37.642 59.94 800 1056 128 88 600 628 4 23 800×600 31.4 50 800 1056 128 88 600 628 4 23 852×480 26.25 50 852 1044 24 48 480 525 4 30 852×480 31.469 59.94 852 1044 24 48 480 525 4 30 853×480 26.

  • Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page ii CONTENTS Contents ii PRODUCT DESCRIPTION................................................................................................................ 1 1.1. Product Overview ................................................................................................ 1 1.2. Packing List

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 13 of 30 ADJUSTING AN INPUT 6.1. Introduction When an input channel has been selected, an input type dependent Picture Controls menu can be accessed. Note that for this menu to be fully accessible, a valid video input signal MUST be connected to the chosen video input channel. All settings on the Picture Controls menu are stored separately for each input channel and so do not affect the other inputs. Note: Default settings for many items are dependent on the type of input channel and the type of display device chosen.

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 9 of 30 CONNECTING VANTAGE-HD INPUTS 3.1. Introduction It is now necessary to define which input channels are connected and to pair the correct audio channel with each video channel. To begin to do this, scroll down to the Input Connections menu and enter that menu by pressing the right navi-key. By default, no video channels and no audio channels are active. You must define which channels are connected on the Input Connections menu and choose whether or not each video channel has an associated audio channel. Only those video channels which are physically present on your Vant

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 30 of 30 WARRANTY & SERVICE ADVICE 1. CALIBRE OFFERS A LIMITED PRODUCT WARRANTY FOR 12 MONTHS FROM DATE OF PURCHASE, SUBJECT TO REGISTRATIONYOU’RE YOUR PRODUCT EITHER ONLINE ON OUR WEB SITE WWW.CALIBREUK.COM OR BY MAIL. LIABILITY IS LIMITED TO THE REPAIR OF REPLACEMENT OR DEFECTIVE PARTS AND IN NO CASE WILL THE LIABILITY EXCEED THE PURCHASE PRICE. 2. CALIBRE UK LTD ACCEPT NO LIABILITY FOR DAMAGE TO SOURCE EQUIPMENT, DISPLAY DEVICE OR AUDIO PROCESSOR DUE TO INCORRECT INSTALLATION, MISUSE OR ABUSE

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page i Welcome to the Vantage-HD Manual For technical support please see the Home Theater section of our website http://www.calibreuk.com/home_theater.php . If the web site does not provide the information you require, please contact your dealer, installer or distributor in the first instance, or if they are unable to resolve your query please e-mail [email protected] . COPYRIGHT & LIMITED WARRANTY This document and the software described within it are copyrighted with all rights reserved. Under copyright laws, neither the documentation

  • Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 25 of 30 POWER SUPPLY SPECIFICATION 12.1. Introduction Should the mains power supply become damaged or fail please contact your Vantage-HD distributor for a replacement. Any replacement power supply should meet or exceed the following specifications Input voltage 100V to 240V; AC 50H

  • Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 7 of 30 12 Optimize Display Device Setup When connecting your display via the SVGA (RGBHV) connector it is imperative that the pixel clock and phase settings are correctly adjusted on the menu system of your display device. For information on how to access th

  • Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 28 of 30 HDMI CONNECTION ADVICE Vantage-HD has two HDMI input ports and one HDMI output fitted as standard. Two further HDMI inputs can be fitted by installing an optional expansion module. HDMI is essential for the connection of HDMI-only HDTV sources with HDCP encrypted

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 3 of 30 CONNECTING VANTAGE-HD TO THE DISPLAY DEVICE 2.1. Correct Installation Order The flow chart below details the correct order in which to install your Vantage-HD, following this order will ensure trouble free installation.

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 27 of 30 ENVIRONMENTAL AND SAFETY 14.1. Operating Temperature 0 o C to 40 o C (32°F to 104°F) Humidity (non condensing) 0% to 95% 14.2. Storage Temperature -25 o C to 85 o C (-13°F to 185°F) Humidity (non condensing) 0% to 95% 14.3. Safety Issues SAFETY WARNING: 1. THERE ARE NO USER SERVICEABLE PARTS WITHIN THE UNIT, THE REMOTE CONTROL OR THE MAINS POWER SUPPLY. DO NOT REMOVE THE POWER SUPPLY COVER - DANGEROUS VOLTAGES WILL BE EXPOSED. DO NOT OPERATE VANTAGE-HD WITH ITS COVER REMOVED. 2. ENSURE THAT ALL ELECTRICAL CONNECTIONS (INCLUDING THE POWER CORD AND ANY

  • Calibre UK VANTAGE-HD, Issue 1.0.2 28 March 2006 © Calibre UK Ltd Page 14 of 30 Video Filters (Video input signals only) A submenu containing selection options for many image enhancement filters including CCS Cross Chrominance Suppression filter (reduction of chroma-crawl) CUE Chroma Upsampling Error correction filter ICP Interlace Chroma Problem filter - Reduces chroma interlace errors on diagonals and curves TNR Temporal Noise Reduction (removes "electronic" noise found on broadcasts, film material and particularly noticeable on plasma screens; set to High to significantly improve signal to noise ratio on p

Related Products and Documents (Home Theater System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Braun CJ 3050 Manual  braun/cj-3050-9YW.pdf 20 Jan 2023 46
2 Philips SWA2301W Specifications philips/swa2301w-167.pdf 16 Jun 2023 2
3 Roland V-4EX Information roland/v-4ex-J8R.pdf 18 Dec 2022 2 4.68 Mb
4 Philips DLA63064 Brochure philips/dla63064-O78.pdf 27 Jan 2024 2
5 JVC DR-MX1S Gebruiksaanwijzing jvc/dr-mx1s-F7C.pdf 11 Oct 2022 100
6 Ikelite Digital Housing Instruction manual ikelite/digital-housing-MT9.pdf 31 Jul 2023 32

Similar Resources:

  • Samsung

    HT-F5530

    (120 pages)
    imagine the possibilitiesThank you for purchasing this Samsung product.To receive more complete service,please register your product atwww.samsung.com/register5.1CH Blu-ray™Home Entertainment Systemuser manualHT-F5530HT-F5550HT-F5530_50_ZC_0214.indd 1HT-F5530_50_ZC_0214.indd 1 2013-02-18 오전 10:15:142013-02-18 오전 10:15:14 …
  • Philips

    46PP9302

    (2 pages)
    55PP950246" Digital Widescreen HDTV Monitor46PP930246PP9302• MultiPoint convergence• APAC™ – Automatic Phosphor Aging Compensation• Active Control™• Eye Fidelity• Protective screen filter• HD component input• 3 line digital comb filter• Picture-In-Picture• Virtual Dolby®Surround – 20 Watt RMSPIP …
  • Sony

    KLV-21SR2 - 21" Lcd Wega Color Tv

    (81 pages)
    SERVICE MANUALSPECIFICATIONSKLV-21SR2LCD Color TVUS ModelCanadian ModelTelevision system:American TV standardChannel coverage:VHF: 2-13/UHF: 14-69/CATV: 1-125Antenna:75 ohm external terminal for VHF/UHFScreen size (measured diagonally):21 inchesPanel System:a-Si TFT Active Matrix LCD panel(Effective dots: more than 99.99%)Display resolution:1,024 dots (horiz …
  • Sanyo

    DWM-4500

    (4 pages)
    EXTERNAL SPEAKERS(4Ω)SPEAKEREXTERNALINTERNALLRREAR IN12Quick-GuideDWM-4500DVD Home Theater SystemAccessoriesWireless remotecontrolVideo cableHook upFM indoor antennalead wireDo not connect the power cordto a 120V AC 60Hz outlet until allconnections have been made.1AD6P1P2103-- DWM-4500, Issue Number 1, Printed in ChinaSet the FREQUENCY switch to“1”, …
  • Yamaha

    DV-SL100

    (186 pages)
    DVD / VIDEO CD / CD PLAYERLECTEUR DE DVDDV-SL100OWNER’S MANUALMODE D’EMPLOIBEDIENUNGSANLEITUNGBRUKSANVISNINGMANUALE DI ISTRUZIONIMANUAL DE INSTRUCCIONESGEBRUIKSAANWIJZINGG3139 246 13251DV-SL100DV-SL100(G)IPPrinted in ChinaYAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAHA CANADA MUSIC LTD. 135 MILNER AVE …
  • Samsung

    HW-D570

    (26 pages)
    Crystal Surround Air Track (Active Speaker System)user manualimagine the possibilitiesThank you for purchasing this Samsung product.To receive more complete service, please register your product atwww.samsung.com/registerHW-D570 …

Comments, Questions and Opinions: