Manualios.com

Cambex AIX Operation & User’s Manual

Cambex AIX Manual Online:

4.85, 1341 votes
Cambex AIX User Manual
Cambex AIX User Guide
Cambex AIX Online Manual

Text of Cambex AIX User Guide:

  • Cambex AIX, FibreQuik Fibre Channel Host Bus Adapter For AIX User Guide Cambex Corporation 115 Flanders Road. Westborough, MA 01581 Customer support [email protected] Document: 081-468-042 Date: 01/06/04 Rev.: C

  • FibreQuik - Fibre Channel Adapter User Guide Table of Contents Table of Contents......................................................................................... 1 Description................................................................................................... 2 Specifications....................................................................

  • Cambex AIX, FibreQuik - Fibre Channel Adapter User Guide Description The Cambex FibreQuik™ Fibre Channel host bus adapters provide attachment of Fibre Channel devices to PCI or Micro Channel based servers. They support the SCSI-FCP protocol. When used with the Cambex Alternate Channel Failover software, two adapters in a system provide greater throughput and total protection from failure of a fibre channel loop. Specifications Model PC2000 PC1000 MC1000 Data rate (each dir.) 200 100 100 MB/s Cable length - copper 30 30 30 m - multimode optical 500 500 500 m - sing

  • Cambex AIX, FibreQuik - Fibre Channel Adapter User Guide AIX Driver Installation Command line driver installation The name and revision level of a driver may be examined by issuing the command (as root): installp -ld <device> where <device> is replaced by /dev/fd0 for the floppy drive, /mnt/AIX/PC1000.image for a CD-ROM mounted at /mnt or the name of a driver image file on the hard disk, typically MC1000.image for Micro Channel systems or PC1000.image for PCI systems. Example output would be: Option Name Level I/U Q Content =========================================

  • Cambex AIX, FibreQuik - Fibre Channel Adapter User Guide where <device> is as described above. example: installp -acd /dev/cd0 all After installing the driver, see the README file for additional information more /usr/lpp/cbxfc/READ_ME SMIT Driver Installation The smit path is Software Installation and Maintenance Install and Update Software Install and Update Software by Package Name For the menu item " INPUT device / directory" use /dev/cd0, or the directory where the image file is located. A list should pop up with the name of the driver. Select it and pr

  • Cambex AIX, FibreQuik - Fibre Channel Adapter User Guide AIX Configuration During power-up initialization, AIX will find and configure the new adapter(s) and any supported devices using the driver's configuration method. Devices are assigned a SCSI ID as they are discovered starting with 0. SCSI ID is not related to loop ID or to SCSI ID assignment on other hosts. Configuration may also be run from the command line: cfgmgr Once disks have been configured, the standard smit utilities may be used to build vo

  • Cambex AIX, FibreQuik - Fibre Channel Adapter User Guide Persistent Bindings Persistent Bindings is the term used to indicate the mapping of SCSI ID to FC Worldwide Name (WWN). By keeping a persistent binding, the loop ID or port ID of a device may change and the device will still be properly addressed. In the Cambex AIX driver, persistent binding is automatic. At configuration time, all devices that are found are automatically assigned to a SCSI ID and a persistent binding is created. Persistent bindings are by port name and are kept in the ODM database. They are preserved and restored at

  • Cambex AIX, FibreQuik - Fibre Channel Adapter User Guide Login after LIP (yes) Full duplex in loop mode (no) Attributes used to limit data rate or resources used Execution throttle (256 simultaneous I/O) IOCB allocation (256) DMA window size (PCI only, 64MB) Max frame size (1024) or 512, 2048. Fibre channel rate in GHz for PC2000 (auto) SCSI device types to exclude (none) Topology list (P2P_LOOP) Error recovery Delay after bus reset or other error (10 seconds) Maximum command timeout (300) in seconds Disconnect time before logging an error (60 sec) Generate Error Report Accesses the AIX error logging facility. Tr

  • Cambex AIX, FibreQuik - Fibre Channel Adapter User Guide example, if errpt identifies a loose cable on device cda1, lsdev will give an address similar to: cda1 Available 00-02-01-3,0 Cambex SCSI... Which indicates that the adapter is in location 00-02, and the drive is at SCSI ID 3, LUN 0. Checklist for driver and HBA installation The following commands may be used to isolate problems during installation of the fibre channel driver and card. Type the command shown in bold and verify the output. whoami must be root uname -a must give 5 fields: 'AIX' hostname where card is installed 1 or higher as minor rev of AIX 4

  • Cambex AIX, FibreQuik - Fibre Channel Adapter User Guide lscfg -vl scsi4 should print more information for a card: DEVICE LOCATION DESCRIPTION scsi4 20-58 Cambex ... Manufacturer................CAMBEX Machine Type and Model......PC1000F ROS Level and ID............V2.01.19 Serial Number............... 579 Displayable Message.........Cambex ... Network Address.............500502E010000243 Device Specific.(Z0)........Build:TMFtL Device Specific.(Z1)........1.5.

  • Cambex AIX, FibreQuik - Fibre Channel Adapter User Guide • Full_duplex enables higher performance in loop mode where all connected devices support it. P2P is inherently full duplex. • Fibre Channel topology is normally found automatically but may be forced to loop_only or P2P_only with this attribute. • Frame_size defaults to 1K • Infinity is the length of time that the driver will wait for a command before assuming that it has failed. • DMA_window is used to map memory for DMA transfers on PCI bus, 64-bit systems. • GHz is only 1GHz for PC1000 and MC1000 c

  • Cambex AIX, FibreQuik - Fibre Channel Adapter User Guide Topology: NL AL_PA: 0xef Adapter_ID: 0 or for fabric: Topology: F Port_name: 0x00011000 Adapter_ID: 255 Make sure that the id value doesn't conflict with any other host or device on the same fibre channel loop. The other attributes will be different on each card. During boot, the number displayed when configuring the adapter is hex 0x911 (FC adapter). /usr/lpp/cbxfc/mbtest scsi1 This test code may be used to get fibre channel status from the adapter or from attached devices. /usr/lpp/cbxfc/sctest scsi

  • Cambex AIX, FibreQuik - Fibre Channel Adapter User Guide Appendix A Map of SCSI ID to arbitrated loop physical address (ALPA). ID ALPA ID ALPA ID ALPA ID ALPA 0 EF 1 E8 2 E4 3 E2 4 E1 5 E0 6 DC 7 DA 8 D9 9 D6 10 D5 11 D4 12 D3 13 D2 14 D1 15 CE 16 CD 17 CC 18 CB 19 CA 20 C9 21 C7 22 C6 23 C5 24 C3 25 BC 26 BA 27 B9 28 B6 29 B5 30 B4 31 B3 32 B2 33 B1 34 AE 35 AD 36 AC 37 AB 38 AA 39 A9 40 A7 41 A6 42 A5 43 A3 44 9F 45 9E 46 9D 47 9B 48 98 49 97 50 90 51 8F 52 88 53 84 54 8

  • FibreQuik - Fibre Channel Adapter User Guide PC2000 LED Meanings Top LED – Transceiver hardware is detecting a signal. Middle LED – Firmware is being synchronized. Bottom LED – Flashing amber when not synchronized. LED NORM BAD CABLE NO CONN TOP GREEN GREEN OFF MIDDLE GREEN OFF OFF BOTTOM OFF FLASHING FLASHING - 13 -

  • FibreQuik - Fibre Channel Adapter User Guide Declaration of conformity We Cambex Corporation of Waltham, Massachusetts, USA, declare under our sole responsibility, that the products PC-1000, PC-1000F, MC-1000 and MC-1000F are in conformity with the following standards: EN 55022:1994/A1:1995/A2:1997 Class A ITE emissions requirements EN 50082-1:1992 EMC residential, commercial and light in

  • Cambex AIX, FibreQuik - Fibre Channel Adapter User Guide Safety Notices Safety Notice Class 1 Laser Product Versions of this product supplied with an optical transceiver meet the safety requirements of a class 1 laser as specified by the US Food and Drug Administration Center of Drug and Radiological Health (CDRH) 21 CFR 1040.10 & 1040.11 and by IEC 825-1. The U.S. Department of Health and Human Services (DHHS) does not consider Class 1 lasers to be hazardous. Customer supplied laser GBICs must meet the same requir

Related Products and Documents (Network Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Harman Kardon AVR 8000 Owner's manual harman-kardon/avr-8000-U95.pdf 18 Jan 2023 60 1.09 Mb
2 Roper RT14BKXSQ Energy manual roper/rt14bkxsq-WOD.pdf 31 Mar 2023 2 0.1 Mb
3 Buffalo N600 Specifications buffalo/n600-691.pdf 29 Jan 2024 2 0.7 Mb
4 Encore ENL832-TX-EN Specifications encore/enl832-tx-en-69T.pdf 21 Feb 2024 2 0.14 Mb
5 Digital TSZ07 Installation & owner's manual digital/tsz07-1ZR.pdf 25 Sep 2023 75 0.46 Mb
6 AMX VST-TSF Dimensional drawing amx/vst-tsf-8K7.pdf 01 Dec 2023 1 0.05 Mb

Similar Resources:

  • Buffalo

    Buffalo AirStation WLI-USB-G54

    (12 pages)
    1®Quick Setup Guide54Mbps Wireless USB Adapter-gWLI-USB-G54Use this guide to quickly and easily install your Wireless USB Adapter-g. For detailed setup and configuration information, refer to the User Manual on the USB Utility CD or the Buffalo Wireless Support Web Pages.Contents◗54Mbps Wireless USB Adapter ◗ USB Cable◗ USB Utility CD with Manual …
  • Matrox

    FastNIC 10/100 10574-MT-0102

    (10 pages)
    Matrox FastNIC 10/100Single Port Fast Ethernet 100BaseTX NICPCI Network Interface CardInstallation Guide10574-MT-0102The Matrox FastNIC 10/100 is a high-performance Fast Ethernet adapter card, ideal for typical and “power user” PC workstations. The FastNIC installs into a standard bus-mastering PCI slot. Driver support is provided for most popular networ …
  • HP

    EliteBook 8530w

    (47 pages)
    HP recommendsWindows Vista® Business 1.Volume mute button with LED indicator 15.Hard drive / optical drive activity / HP 3D DriveGuard LED2.Volume scroll zone with up/down LED indicators16.Battery charging LED3.Kensington Lock slot17.Power/standby LED4.RJ-11/modem port18.Wireless on/off LED5.Upgrade Bay (optical drive or second hard drive)19.Power b …
  • HP

    UT-300

    (1 pages)
    All prices in Canadian dollars and include duty and brokerage fees.1-800-344-4539 • ca.digikey.com • 218-681-6674 • Fax: 218-681-3380(C081) 2189KDM-III Multitest Power Quality RecordersFeatures: • True RMS (TRMS) • Measures and records broad spectrum of power quality parameters: AC current, AC voltage to 600V including sags and surges, harm …
  • Dynex

    DX-E201

    (89 pages)
    USER GUIDE • GUIDE DE L’UTILISATEUR • GUÍA DEL USUARIONetwork PC Card Carte réseau pour PCTarjeta PC Card de RedDX-E201Dynex5x7-multi.book Page 1 Thursday, September 8, 2005 11:07 AM …
  • Alcatel-Lucent

    Service Aggregation Router 7705

    (144 pages)
    Alcatel-Lucent 7705SERVICE AGGREGATION ROUTER | RELEASE 1.0SAR-8 CHASSIS INSTALLATION GUIDEAlcatel-Lucent ProprietaryThis document contains proprietary information of Alcatel-Lucent and is not to be disclosedor used except in accordance with applicable agreements.Copyright 2008 © Alcatel-Lucent. All rights reserved. …

Comments, Questions and Opinions: