Campbell SC32B Instruction Manual

Text of Campbell SC32B User Guide:

• Warranty and Assistance The SC32B OPTICALLY ISOLATED RS-232 INTERFACE is warranted by CAMPBELL SCIENTIFIC, INC. to be free from defects in materials and workmanship under normal use and service for twelve (12) months from date of shipment unless specified otherwise. Batteries have no warranty. CAMPBELL SCIENTIFIC, INC.'s obligation under this warranty is limited

• i SC32B Table of Contents PDF viewers note: These page numbers refer to the printed version of this document. Use the Adobe Acrobat® bookmarks tab for links to specific sections. 1. Function.......................................................................1 2. Specifications .............................................................1 3. Connector Descriptions .............

• Campbell SC32B, 1 SC32B Optically Isolated RS-232 Interface Datalogger Computer SN: SC32B MadeinUSA CAMPBELL SCIENTIFIC,INC. Logan,Utah 1. Function The SC32B interfaces an RS-232 peripheral, commonly a computer or terminal, to the CS I/O of a CSI datalogger. The SC32B has the same functions as the SC32A. Functions include: 1. Converting datalogger logic levels to RS-232 logic levels. 2. Optically isolating the datalogger and the RS-232 peripheral. Optical isolation separates the SC32B into a datalogg

• Campbell SC32B, SC32B Optically Isolated RS-232 Interface 2 3. Connector Descriptions TABLE 3-1. SC32B Connector Descriptions RS-232 9 Pin Female Connector CS I/O 9 Pin Male Connector Pin # I/O Description Pin # I/O Description 1OutDCD 1In+5 V 2 Out RXD 2 Ground 3InTXD 3OutRing 4InDTR 4OutRX 5 Ground 5 In ME 6 Out DSR 6 In PE (SDE) 7 In RTS 7 No Connection 8 Out CTS 8 No Connection 9 No Connection 9 In TX 3.1 RS-232 The DB9 RS-232 port is configured as Data Communications Equipment (DCE) for direct cable connection to Data Terminal Equipment (DTE). Most computers are configured as DTE. For connect

• Campbell SC32B, SC32B Optically Isolated RS-232 Interface 3 5. Application The SC32B provides a direct interface between the CS I/O port on a Campbell Scientific datalogger and the RS-232 port on a computer. Some Campbell Scientific dataloggers (e.g., the CR23X and CR5000) have a built-in RS-232 port in addition to the CS I/O port. With these dataloggers the SC32B is only necessary if you wish to connect to the CS I/O port instead of the RS-232 port. The SC32B blocks data sent out the CS I/O port when the datalogger sets the printer enable/SDE (pin 6) high. The SC932 or SC932A (CS I/O to RS-232 DTE interface) can be used to interface to an

• Campbell SC32B, Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com [email protected] Campbell Scientific Africa Pty. Ltd. (CSAf) PO Box 2450 Somerset West 7129 SOUTH AFRICA www.csafrica.co.za [email protected] Campbell Scientific Australia Pty. Ltd. (CSA) PO Box 444 Thuringowa Central QLD 4812 AUSTRALIA www.campbellsci.com.au [email protected] Campbell Scientific do Brazil Ltda. (CSB) Rua Luisa Crapsi Orsi, 15 Butantã CEP: 005543-000 São Paulo SP BRAZIL www.campbellsci.com.br [email protected]

More Instructions:

Campbell SC32B Instruction manual 16-08-2022 14

DOWNLOAD

Related Products and Documents (Network Card):

Comparable Devices:

Similar Resources:

• Paradyne 8335 (12 pages) 8335-A2-GZ40-60 March 2005 1Hotwire® ATM Line CardsModels 8335, 8355, 8365, 8375, and 8385Installation InstructionsDocument Number 8335-A2-GZ40-60March 2005 ContentsSoftware and Firmware License Agreement ................................................. 2Hotwire ATM Line Cards ............................................................................... …

• NETGEAR GA620 - PCI Fiber Card (2 pages) CONNECT THE NETWORK CABLESUsing the appropriate cable (as outlined in the table below), connect the port on a network hub or switchto the port on the card. The port on the card performs autonegotiation and supports full-duplex operation.Multimode Fiber (GA620) 62.5/125-Micron* 50/125-MicronOperating range 2 to 260 meters 2 to 550 meters* Shortwave laser opti …

• Panasonic 2SC5845 (3 pages) Transistors1Publication date: August 2003 SJC00297AED2SC5845Silicon NPN epitaxial planar typeFor general amplification■ Features• High forward current transfer ratio hFE• Mini type package, allowing downsizing of the equipment and au-tomatic insertion through the tape packing and the magazine pack-ing■ Absolute Maximum Ratings Ta = 25°CParameter Sy …

• Promise Technology C6101SSWP000000-2 (18 pages) Copyright Copyright by Promise Technology, Inc. (“Promise”), 1999. No part of this manual may be reproduced or transmitted in any form without the expressed, written permission of Promise. Trademarks All trademarks are the property of their respective holders. Important data protection information You should back up all data before installing any dr …

• Omnitron Systems Technology FlexPoint 4380 (1 pages) FlexPoint™ Wall-Mounting KitDescriptionThe 4380 FlexPoint Wall-Mounting kit was designedto attach one FlexPoint module to a wall, back-board orother flat surface. The 4380 kit includes the followinghardware:(2) “L” shaped brackets.(4) Flat head screws, 4-40, 1/4 inch.(4) Wall mounting screwsWarning:Before installing a FlexPoint unit, make sure to disc …

• NetComm NP730 (2 pages) NetComm NP730802.11b/g Wireless Outdoor Access PointKEY FEATURESEasy Installation5dBi detachable antenna with N type connection64-bit/128-bit/152bit WEP encryptionWi-Fi Protected Access (WPA) securityHigh quality robust material designed for outdoor conditionsRange up to 5Km …

Comments, Questions and Opinions: