Canon ImageCLASS MF4570dw Network Setup Manual

Text of Canon ImageCLASS MF4570dw User Guide:

• Canon ImageCLASS MF4570dw, 29 Configuring Manually (Selecting Access Points) 3. Press [ ] or [ ] to select <Wireless LAN Settings>, and then press [OK]. << Previous Next >> 4. Press [OK]. 5. Press [ ] or [ ] to select <SSID Settings>, and then press [OK].

• Canon ImageCLASS MF4570dw, 18 Configuring with WPS Features (Pin Code Mode) << Previous Next >> 8. Make sure the WiFi indicator blinks. When the wireless LAN router or access point is detected, the Wi-Fi indicator blinks. The next screen is displayed for approximately 2 seconds, and then the Wi-Fi indicator lights. *If an error message appears, press [OK] to close the screen and follow the procedure again from Step 5

• Canon ImageCLASS MF4570dw, 23 Configuring Manually (Using the Wireless Setup Assistant) Checking the SSID or Network Key of the Wireless LAN Router/Access Point If the SSID and network key are not indicated on the body of the wireless LAN router or access point or if you are not sure because they are changed, you can check using Canon MF/LBP Wireless Setup Assistant. * Canon MF/LBP Wireless Setup Assistant is included in the supplied User Software CD-ROM. 1. Check your network environment. You cannot use Canon MF/LBP Wireless Setup Assistant under either of the following conditions. • Your Computer is connected to the machine over a wired LAN. • You are using a computer running Windows X

• Canon ImageCLASS MF4570dw, << Previous Next >> 10 Configuring with WPS Features (Push Button Mode) 1. Press [ ] (Menu). 2. Press [ ] or [ ] to select <Network Settings> , and then press [OK]. The next screen is displayed for approximately 5 seconds. You do not need to turn the machine OFF/ON in this step.

• Canon ImageCLASS MF4570dw, 17 Configuring with WPS Features (Pin Code Mode) 7. Within 10 Minutes, use the computer to enter the PIN code displayed on the screen into the wireless LAN router or access point. *For PIN code entry methods, see the instruction manual provided with the wireless LAN router or access point you are using. *If “Cannot find Access Point” appears, press [OK] to close the screen and follow the procedure from Step 5. << Previous Next >>

• Canon ImageCLASS MF4570dw, 37 Configuring Manually (Manually Entering SSID) 1. Press [ ] (Menu). 2. Press [ ] or [ ] to select <Network Settings>, and then press [OK]. << Previous Next >> 3. Press [ ] or [ ] to select <Wireless LAN Settings>, and then press [OK]. 4. Press [OK].

• Canon ImageCLASS MF4570dw, 27 Configuring Manually (Using the Wireless Setup Assistant) If multiple access points are displayed Write down all of the displayed SSIDs << Previous Next >> When wireless LAN routers or access points are not displayed Click [Refresh] When information is not displayed even after clicking [Refresh], check that the settings for the computer and wireless LAN or access point are complete. Click Here to return to the selection page.

• Canon ImageCLASS MF4570dw, << Previous Next >> Installing Your WiFi capable imageCLASS Product to Your Network for the First imageCLASS MF4570dw Windows OS Before adding the machine to a wireless LAN 3 Connection procedure 4 Switching the connection method to wireless LAN 5 Selecting a method for setting the wireless LAN 8 Configuring using WPS 9 Configuring Manually 20 Required Information 22 Using the Wireless Setup Assistant 23 Checking the IP Address 47 Installing MF Drivers and MF Toolbox 49 2

• Canon ImageCLASS MF4570dw, 36 Configuring Manually (Selecting Access Points) 11. Wait until the machine sets the IP address automatically (approx. 2 min). The machine sets the IP address automatically and connects to the network. << Previous Next >> If you want to set the IP address manually, see the following. •e-Manual “Setting the IP Address (IPv4) •e-Manual “Setting the IP Address (IPv6) Automatic obtaining of the IP address (Auto IP) By default, <DHCP> and <Auto IP> are enabled Even if you do n

• 32 Configuring Manually (Selecting Access Points) 8. Press [ ] or [ ] to select entry format that matches the number of network key characters (digits) that you have written down earlier, and then press [OK]. Either of the following screens is displayed. << Previous Next >>

• Canon ImageCLASS MF4570dw, Connection procedure << Previous Next >> 4 Once you have finished checking, connect the machine to the wireless LAN The diagram below shows the primary steps in connecting your imageCLASS device to the wireless LAN.

• Canon ImageCLASS MF4570dw, Configuring with WPS Features (Push Button Mode) 14 << Previous Next >> 9. Wait until the machine sets the IP address automatically (approx. 2 min). The machine sets the IP address automatically and connects to the network. When the next screen is displayed, click [OK]. If you want to set the IP address manually, see the following. •e-Manual “Setting the IP Address (IPv4) • e-Manual “Setting the IP Address (IPv6) Automatic obtaining of the IP address (Auto IP) By default, <DHCP> and <Auto IP> are enabled Even if you do not set the IP address manually, this machine can ob

• Canon ImageCLASS MF4570dw, 35 Configuring Manually (Selecting Access Points) The Wi-Fi indicator blinks. << Previous Next >> The screen below is displayed for approximately 2 seconds, and then the Wi-Fi indicator lights up. * When a message appears, press [OK] to close the screen and start the procedure from Step 4.

• 6 Switching the connection Method to Wireless LAN << Previous Next >> 3. Press [ ] or [ ] to select <Select Wired/Wireless LAN> , and then press [OK]. 4. Select <Wireless LAN> using [ ] or [ ], and then press [OK].

• Canon ImageCLASS MF4570dw, 38 Configuring Manually (Manually Entering SSID) 5. Press [ ] or [ ]to select <SSID Settings>, and then press [OK]. << Previous Next >> 6. Press [ ] or [ ] to select <Manual Settings>, and then press [OK]. 7. Enter the SSID that you have written down. After entering it using the numeric keys, select <Apply> using [ ] or [ ], and then press [OK].

• 1. Press [ ] (Menu). 2. Press [ ] or [ ] to select <Network Settings>, and then press [OK]. The next screen is displayed for approximately 5 seconds. It is not necessary to turn OFF/ON the main power of the machine here. It will be done on Step 5. Switching the connection Method to Wireless LAN 5 << Previous Next >>

• Canon ImageCLASS MF4570dw, 22 Configuring Manually (Required Information) Access Point Name/Network Name * It may be labeled as “SSID.” It is the distinguished name for specifying a particular access point. It is used for selecting an access point. Network Key *It is also called encryption key, WEP key, WPA/WPA2 passphrase, PSK or pre-shared key. It is a password that must be set in order to prevent communications from being intercepted. It is used for entering the network key. Number of characters in the network key (number of digits) It is used for selecting a entry format which corresponds to the number of network key characters (digits) Type of Encryption (Only when Ma

• Canon ImageCLASS MF4570dw, 21 Configuring Manually Preparing The following information is required. Check your wireless LAN routers and/or access points, and make a note of the information labeled on the bottom. * See the manual provided with your wireless LAN routers and/or access points, or contact the manufacturer for where the information is displayed or how to check it. << Previous Next >>

• Canon ImageCLASS MF4570dw, 28 Configuring Manually (Selecting Access Points) From the list of access points searched by the machine, select a wireless LAN router or an access point to be connected and enter a network key for connection. Selecting Access Point For selecting access points, WEP 802.11 authentication system is set to <Open System>, while WPA/WPA2 is set to Auto> (either AES-CCMP or TKIP) 1. Press [ ] (Menu). 2. Press [ ] or [ ] to select <Network Settings>, and then press [OK]. << Previous Next >>

• 43 Configuring Manually (Manually Entering SSID) << Previous Next >> Hexadecimal 1. Enter the network key. *Press [ ] or [ ] to select the character, and then press [OK] to enter. 2. After entering, press [ ] or [ ] to select <Apply>, and then press [OK]. • When WEP is the encryption type Select WEP keys (1 to 4) for encryption 1.

• Canon ImageCLASS MF4570dw, Before adding the machine to a wireless LAN << Previous Next >> Check to make sure that the setup of the computer and wireless LAN or access point are complete. If they are not set up, you will not be able to use the machine on the wireless LAN network even if you perform the following steps. • The structure of your computer or networked device, the existence of router functions, setting methods and security settings vary depending on your environment. • For more information, see the instruct

• Canon ImageCLASS MF4570dw, 56 Installing the MF Drivers and MF Toolbox << Previous Next >> If the problem persists, try the following procedure. 1. Click [Search by IP Address]. 2. Enter the IP address of the machine. *If the IP address of the machine is set between "169.254.1.0 and 169.254.254.255", it means that the IP address is automatically assigned to the machine in the auto configuration procedure. When the IP address is not a link-local address, set up your computer and the machine to be on the same subnet. This allows the installer to search the machine. 3. Click [OK].

More Instructions:

	Canon ImageCLASS MF4570dw Settings manual 27-07-2022 20	DOWNLOAD
	Canon ImageCLASS MF4570dw Starter manual 24-09-2023 40	DOWNLOAD
	Canon ImageCLASS MF4570dw Basic operation manual 16-01-2024 164	DOWNLOAD
	Canon ImageCLASS MF4570dw Specifications 09-07-2023 2	DOWNLOAD

Related Products and Documents (Network Card):

Comparable Devices:

Similar Resources:

• Siemens SIMATIC NET CP 343-1 (56 pages) SIMATIC NETS7-CPs for Industrial EthernetManual Part B3LCP 343-1 Lean6GK7 343−1CX10−0XE0 as of hardware version 2, as of firmware version V2.0for SIMATIC S7−300 / C7−300Release 03/2007C79000-G8976-C198-04TP port:2 x 8−pin RJ−45 socket(beneath the front panel)LED displaysX = Placeholder for hardwareversion …

• Linksys USB1000 (1 pages) Model No.Quick InstallationQuick InstallationA Division of Cisco Systems, Inc.®Model No.WIREDUSB1000Gigabit USB AdapterPackage Contents• One USB1000 - Gigabit USB Adapter• Setup Wizard CD-ROM with User Guide in PDF format•Network Cable• Registration Card1A Insert the Setup Utility CD into your PC's CD-ROM drive.B The Setup Utility's Welco …

• Buffalo WLI-CB-G54S (2 pages) www.buffalotech.com125* High-Speed Mode™ Wireless Notebook Adapter - WLI-CB-G54SWLI-CB-G54SThe AirStation 125* High-Speed Mode™ Wireless Notebook Adapter offers afast and flexible client solution for your notebook PC.32-Bit CardBustechnology and 54 Mbps wireless data rates ensure maximum performance.In addition, the 125* High-Speed Mode™ Wireless Note …

• Huawei 3G Wireless Gateway (9 pages) R207 v4.1 Upgrade Guide Pocket WiFi 3G (R207) Upgrade Guide Huawei Technologies (Australia) Pty Ltd. All rights reserved …

• NEC DSX-160 (4 pages) Parts List76 ◆ Specifications and Parts DSX-80/160 Hardware ManualParts ListStation EquipmentDescription Part Number22-Button Display Telephone with Speakerphone 1090020 (Black)1090025 (White)34-Button Backlit Display Telephone with Speakerphone 1090021 (Black)1090026 (White)34-Button Backlit Display Telephone with Full-Duplex Speaker-phone1090022 (Black) …

• Trust CN105W (10 pages) TRUST CN105W WIRELESS NETWORK PC-CARD1UKMethod when using for the first time Chapter1. Uninstalling old drivers and devices (3.1)2. Installing the hardware (3.2)3. Installing drivers in Windows (3.3)4. Installing the applications (3.4)5. Testing (4)1 IntroductionThis instruction manual is for users of the TRUST CN105W WIRELESS NETWORKPC-CARD. This wi …

Comments, Questions and Opinions: