Canon ImageCLASS MF4690 Driver Manual
|
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 1-4 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index Checking Installation Check if the driver is installed successfully. 1. Open the [Scanners and Cameras] folder (Windows 98/2000: the [Scanners and Cameras Properties] dialog box). Click [start] on the Windows task bar → select [Control Panel] → [Printers and other Hardware] → [Scanners and Cameras]. (Windows Vista: [start] → [Control Panel] → [Hardware and Sound] → [Scanners and Cameras]. Windows 98/Me/2000: [Start] → [Settings] → [Control Panel] → double-click [Scanners and Cameras].) Make sure the
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 2-9 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index MF Toolbox Settings Example: [Mail] dialog box ■ Scanner Settings You can specify the scanning mode, resolution, document size, and file size of the scanned image. [Select Source] Selects where the document is placed ([Platen Glass], [ADF], or [Auto Mode]). NOTE When [Auto Mode] is selected, the document in the ADF is automatically scanned. If there is no document in the ADF, the document on the platen glass will be scan
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 2-3 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index Scanning with [Start] on the Machine You can scan documents and transmit the scanned data to your computer using the operation panel of the machine. NOTE Your machine must be connected via USB and the USB scanner driver must be loaded to scan. This machine does not support network scanning. 1. Set documents. 2. Press [SCAN] on the machine. 3. Press [Start] on the machine. If you are asked to select a program to launch, select “MF Toolbox Ver4.9.” The scanned do
1 2 3 4 TOP Back Previous Next 4-5 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index G Gamma Correction Method for changing the brightness of an image. With gamma correction, the brightness of parts of an image in the middle of the tonal range is changed without changing the lightest or darkest areas of the image, which mean
Canon ImageCLASS MF4690, 1 2 3 4 Introduction Scanning a Document Troubleshooting Appendix TOP Back Previous Next ii Table of Contents Index Legal Notices Trademarks Canon and Canon logo are trademarks of Canon Inc. Microsoft, Windows and Windows Server are registered trademarks of Microsoft Corporation in the United States and other countries. Windows Vista is a trademark of Microsoft Corporation in the United States and other countries. All other product and brand names are registered trademarks, trademarks or service marks of their respective owners. Copyright
Canon ImageCLASS MF4690, 1 2 3 4 Table of Contents Index How to Use This Guide TOP Back Previous Next Scanner Driver Guide Introduction Scanning a Document Troubleshooting Appendix Please read this guide before operating this product. After you finish reading this guide, store it in a safe place for future reference. MF4600 Series
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 3-6 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index Scanned images look dirty. Q Are the scanning components of the machine clean? A Clean the platen glass, the platen glass cover and the ADF scanning area. Q Is the image size too small? A Some applications do not display an image properly at small sizes. Try displaying the image at 100% magnification. Q Is the monitor's display color set below 16 bits? A In [Display Properties], set the display colors to
1 2 3 4 TOP Back Previous Next 2-47 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index Advanced Properties NOTE The setting items and default values in the [Advanced Properties] tab vary depending on the type of picture you select. [Appearance] Shows the preview of sample image. [Brightness] Specifies the brightness (–127 to 127). [C
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 2-24 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index ■ Advanced Mode Settings Favorite Settings Favorite Settings enables you to save a set of settings (Input Settings, Output Settings, Image Settings, Color Settings and Preferences) made for the focal cropping frame. If there are no cropping frames, settings for the whole preview area are saved. You can also recall the saved settings and apply them to the selected frames or the whole preview area. NOTE The following items cannot be saved in Favorite Settings: – Values of (Width) and (Height) in [Input Settings] and in [Outp
Canon ImageCLASS MF4690, 1 2 3 4 Introduction Scanning a Document Troubleshooting Appendix TOP Back Previous Next viii Table of Contents Index ■ Using the Chapter Topic List 1 2 3 4 Introduction Scanning a Document Troubleshooting Appendix TOP Back Previous Next 1-1 Table of Contents Index 1 Introduction Where to Find Help.................................................................................. 1-2 System Requirements............................................................................. 1-3 Checking Installation............................................
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 2-41 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index 5. Select the paper source. You can select from [Flatbed] or [Document Feeder]. 6. Specify the scanned area. If you have selected [Flatbed] as the paper source, click [Preview] → drag to specify the scanned area. If you have selected [Document Feeder] as the paper source, select the page size from the drop-down list. 7. Click [Next >]. 8. Specify a name, a file format, and the location for saving the group of pictures. NOTE –
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 2-40 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index Scanning with the WIA Driver ■ Scanning from the [Scanner and Camera Wizard] Dialog Box (Windows XP Only) 1. Open the [Scanners and Cameras] folder. Click [start] on the Windows task bar → select [Control Panel] → [Printers and Other Hardware] → [Scanners and Cameras]. 2. Double-click the corresponding WIA driver icon. 3. Click [Next >]. 4. Select a picture type. You can select from [Color picture], [Grayscale picture], [Black and white picture or text], and [Custom]. When selecting [Custom], click [Custom settings] to make detailed settings in the [
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 3-7 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index Installing and Uninstalling Problems Cannot install the software. Q Have you followed the instructions to install the software? A Try reinstalling the software. If an error occurred and installation was not complete, restart your computer and try reinstalling the software. Q Are any other applications open? A Quit all of these and try reinstalling the software. Removal of the drivers takes too l
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 2-36 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index ● [Scan] Tab [Scan without Using ScanGear’s Window] Enables you to scan in a specific color mode when using an application that will not display the [ScanGear MF] dialog box (such as OCR software), overriding the application settings. [Color Mode (Text and Table)]: The document is scanned in a mode equivalent to [Color (Documents)] of [Color Mode], regardless of the application settings. [Text Enhanced]: The document is scanned in a mode equivalent to [Text Enhanced] of [Color Mode], regar
1 2 3 4 TOP Back Previous Next 1-3 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index System Requirements General – IBM or IBM-compatible PC – PC equipped with a USB port and the USB class driver installed Microsoft Windows 98, 98SE CPU: Intel ® Pentium ® 90 MHz or higher Memory: 128 MB or more Microsoft Windows Me CPU: Intel ® Pentium ® 150 MHz
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next v Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index Setting Preferences and Scanning with ScanGear MF ........................... 2-18 Switching between Simple Mode and Advanced Mode .................... 2-18 Using Simple Mode ........................................................................... 2-18 Using Advanced Mode ...................................................................... 2-21 Specifying the Parameters of a Scan................................................ 2-22 Advanced Mode Settings ................................................................
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 2-42 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index 9. Click [Next >] to start scanning. 10.Click [Next >]. If you want to publish these pictures to a Web site or order printouts online, select the corresponding option. 11.Click [Finish].
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 2-14 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index Exif Settings You can attach extra information in the EXIF format, such as the description of the image, the date when the image was scanned, etc., to the JPEG files. Select a scanned image from the drop-down list to view and add information for the image. [Add Scanned Image to] This item appears instead of [Save Scanned Image to] when [PDF (Add Page)] is selected in [Save as Type]. You can select the PDF file to which you want to add the scanned image. [Save Pictur
1 2 3 4 Introduction Scanning a Document Troubleshooting Appendix TOP Back Previous Next ix Table of Contents Index The following symbols are used throughout the manuals for the machine and indicate the warnings, cautions and notes you should keep in mind when using the machine. WARNING Indicates a warning that may lead to death or serious injury if not observed.
1 2 3 4 TOP Back Previous Next 2-7 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index Scanning with the MF Toolbox You can scan a document using the buttons on the MF Toolbox. 1. Set documents. 2. On the Windows desktop, double-click the [Canon MF Toolbox 4.9] icon to open the MF Toolbox. You can also open the MF Toolbox by clicking [start] on t
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 2-32 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index ● Tone Curve Settings This dialog box enables you to adjust the brightness of a specific area of an image by selecting the type of the tone curve. The tone curve is a graph showing the balance of tone input and output. [Channel] Select a color to adjust either [Red], [Green], or [Blue], or select [Master] to adjust all three colors together when [Color] or [Color (Documents)] is selected in [Color Mode]. Adjust
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 2-21 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index ■ Using Advanced Mode 1. Set documents. 2. Select settings for [Favorite Settings], [Input Settings], [Output Settings] and [Image Settings], and adjust the color settings. For details on the settings, see “Advanced Mode Settings,” on p. 2-24. If you select [ADF (1-sided)] in [Original Input Method], skip to step 4. 3. Click [Preview]. NOTE – Selecting the range in the preview window and clicking [Zoom] reloads the selected image to be enlarged. – T
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 2-29 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index Color Settings Using Color Settings buttons, you can adjust the brightness and contrast of the whole image, specify highlights and shadows, and adjust the contrast and balance in an image. The buttons displayed differ depending on your selection in [Color Mode]. When [Text Enhanced] is selected, no Color Settings button is displayed. When [Color], [Color (Documents)] or [Grayscale] is selected in [Color Mode]: When [Black and White] is selected in [Color Mo
Canon ImageCLASS MF4690, 1 2 3 4 Scanning a Document TOP Back Previous Next 4-8 Introduction Troubleshooting Appendix Table of Contents Index U Uninstall To remove software installed on a computer and return the computer to its condition before the software was installed. Universal Serial Bus (USB) interface These are new serial interface standards. This bus automatically recognizes connections (Plug and Play) to allow plugging and unplugging connectors with the power still turned on to the PC or peripheral equipment. W WIA (Windows Image Acquisition) S
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next iii Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index Table of Contents Manuals for the Machine ................................................................................i Legal Notices.................................................................................................ii How to Use This Guide................................................................................ vii Using the Top Page ............................................................................. vii Using the Chapter Topic List ..............................................................
1 2 3 4 TOP Back Previous Next 2-31 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index [Channel] Select a color to adjust either [Red], [Green], or [Blue], or select [Master] to adjust all three colors together when [Color] or [Color (Documents)] is selected in [Color Mode]. Adjust the elements of grayscale when [Grayscale] is selected in [Color Mo
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 2-5 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index Also you can set it up in the following way. In the MF Toolbox, click [Settings] to open the [Settings] dialog box. From the drop-down list, select the scanning function you want to link [Start] to, then click [OK]. ■ Setting up other applications which have not been registered to MF Toolbox 1. Open the [Scanners and Cameras] folder (Windows 98/2000: the [Scanners and Cameras Properties] dialog box). Click [start] on the Windows task bar → select [Control Panel]
Canon ImageCLASS MF4690, 1 2 3 4 TOP Back Previous Next 2-6 Introduction Scanning a Document Troubleshooting Appendix Table of Contents Index 4. Specify an action for [Start]. On Windows XP/Vista: Select the [Events] tab → select the option corresponding to your machine from [Select an event] → select the operation for [Start] in [Actions] → click [OK]. On Windows 98/Me/2000: Select the [Events] tab → select the option corresponding to your machine from [Scanner events] → select the operation for [Start] in [Send to this application] → click [OK]. NO
Canon ImageCLASS MF3240 Scanner Software manual
ImageCLASS MF3240 |
Canon CANOSCAN N650U Scanner Getting started manual
CANOSCAN N650U |
Canon PIXMA MG6320 Scanner Network setup manual
PIXMA MG6320 |
Canon ImageRunner C2550 Scanner Specifications
ImageRunner C2550 |
Canon imageRUNNER 105 Scanner Function manual
imageRUNNER 105 |
Canon i455 Scanner Quick start manual
i455 |
Canon PIXMA MX452 Scanner Easy setup
PIXMA MX452 |
Canon BJC-55 Scanner Operation & user’s manual
BJC-55 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Panasonic | 2008 | Brochure & specs | panasonic/2008-999.pdf | 17 Sep 2023 | 16 | 5.94 Mb |
2 | GoVideo | PVP4040 | Brochure | govideo/pvp4040-QWO.pdf | 06 Mar 2023 | 1 | 0.08 Mb |
3 | JVC | HR-J430U | Instructions manual | jvc/hr-j430u-DO9.pdf | 28 Aug 2022 | 44 | |
4 | Lanier | GELJET SG 3110DN | Manual | lanier/geljet-sg-3110dn-I83.pdf | 21 Nov 2023 | 4 | |
5 | Barco | CTHD-61B | Operation & user’s manual | barco/cthd-61b-YM3.pdf | 27 Jun 2023 | 68 | |
6 | Legacy | Legend SB500R | Operation & user’s manual | legacy/legend-sb500r-625.pdf | 02 Feb 2024 | 12 |
POSMicro
QUESTIONS? Ask the experts at POSMicro.com. 1.800.241.6264 Live Chat Now [email protected] - Friday 6 AM to 5 PM Pacic TimeBULK DISCOUNTSFREE SHIPPING*SE HABLA ESPAñOL*Free ground shipping to the continental USA on orders over $100.For Help Call 1.800.241.6264Symbol LS9203 ManualMore information available at POSMicro.com
…
Symbol LS9203(339 pages) |
Philips
2/27/07 PhotoScan 2001 instructions 1 Z/I Imaging PhotoScan 2001 scanner instructions (5 pages total) Last Updated February 27, 2007 Original Document By Amy McGough Updates by Paul Chipman All first-time users should arrange for training from a qualified user from their working group to receive training prior to scanning. AFTER users have been traine …
PhotoScan 2001(6 pages) |
Tru-Test
1 This quickstart guide provides basic instructions for setting up and using your XRS2 Stick Reader. Contents Unpacking the box .................................. 1 Charging the battery ................................ 2 Getting around ........................................ 2 Recording EID tags .................................. 3 Bluetooth® connection …
XRS2(88 pages) |
Unitech
Laser Scanner - MS837 - User’s ManualVersion 1.4 Copyright 2012 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
…
MS837(67 pages) |
Unitech
MS100 Quick Start GuideConnect to host via PS/2Plug the interface cable into a free USB port of a host computer.The following steps will show you how to install your scanner.SETUP AND INSTALLATIONSETTINGS AND CONFIGURATIONThe following section covers the most common conguration settings for your MS100 scanner. For additional conguration optio …
MS100(1 pages) |
RIOTEC
1 Programming Quick Guide -DC9253A: Docking Scanner Docking Scanner: Gently tap the trigger area at the middle of scanner, to enable the scanner (for reading barcode) Up Side Lower Side The touch sensor area is around middle of the scanner as drawing shown. Installation They are Plug &Play USB (HID) devices. Wh …
DC9253A(2 pages) |
American DJ Flood Light Gobo Motion LEDAmerican DJ Product Guide: Gobo Motion LED PDF User instructions - 41O32V Gobo Motion LED, 10 |
Contec Touch Panel IPC-PT/MV15 SeriesPDF Guide (@Z7BOUG), Contec IPC-PT/MV15 Series Touch Panel (Fri 11.2023) IPC-PT/MV15 Series, 39 |
Mayline Office Equipment MNPBMayline Product Guide: MNPB PDF Assembly instructions - LJ9Y7A MNPB, 3 |
Diamond Multimedia graphic card Radeon X1950XTXUser Manual: Diamond Multimedia Radeon X1950XTX (WRSNV6, Upd.30th Dec 2023) Radeon X1950XTX, 1 |
NordicTrack Treadmill C900 24959.0Operation & user’s manual for NordicTrack C900 24959.0 Treadmill C900 24959.0, 36 |
TurboChef Oven G5TurboChef Product User Guide: G5 PDF Owner's manual - 7BP2K2 G5, 28 |
AVE Switch 2PSWT2PSWT Operation manual - 1T78PK 2PSWT, 8 |
Digitus Network Router DN-60012Digitus Network Router Manual (File: digitus-dn-60012-manual-5, 11th Sep 2023) DN-60012, 5 |
Giant Other SUEDE DX WOther PDF Datasheet SUEDE DX W, 1 |
Dimplex Switch DX4130DX4130 (Switch ePDF User Guide, #997V63) DX4130, 3 |
EverFocus Security System EDR810HUser Guide: EverFocus EDR810H (YYFJ1X, Upd.Sat 12.2023) EDR810H, 150 |