Manualios.com

Electrograph DTS32LTD Owner's Instructions Manual

Electrograph DTS32LTD Manual Online:

3.45, 1679 votes
Electrograph DTS32LTD User Manual
Electrograph DTS32LTD User Guide
Electrograph DTS32LTD Online Manual

Text of Electrograph DTS32LTD User Guide:

  • Electrograph DTS32LTD, OWNER'S MANUAL 57 OSD Menu Tree PICTURE PC Mode Mode Standard Vivid Mild User Temperature Video NR Color Enhancer Screen Form Black Enhancer WARM2, WARM1, NORMAL, COOL1, COOL2 Video NR On/Off Color Enhancer On/Off 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3 Black Enhancer On/Off SOUND Balance Sound Mode Spatial Effect AVC MTS (Only MTS Button) Standard Movie Music News User Equalizer (Press Set) Spatial Effect On/Off AVC On/Off MONO, STEREO, SAP Digital Output (Only HDTV Mode) User PCM 100Hz, 500Hz, 1.5KHz, 5KHz, 10KHz Contrast Brightness Color Sharpness Tint (Only For NTSC) Recall

  • Electrograph DTS32LTD, OWNER'S MANUAL 24 Connecting the PC ( D-Sub & DVI ) Connecting a PC to the TV Connect a PC (15pin) video cable between the video output port on the PC and the PC port on the TV. Pin Configuration 15pin signal cable (based on protruded pin). To watch the PC screen Turn on the TV and press INPUT button to select the PC mode. Turn on the PC and check for the PC requirement. Adjust the PC screen in Position menu. (See 37 page.) D-Sub 15pin (VGA) from PC DVI from PC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Red (R) Green (G) Blue (B) Grounding Grounding (DDC) Red (R) Grounding Green (G) Grounding

  • Electrograph DTS32LTD, OWNER'S MANUAL 28 Setting the Channel ( ATV ) Choosing the Channel Type 1 2 3 4 Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV. (i.e., an antenna, a standard cable system) Press Menu/Set button to display the main OSD menu. Select the TV main menu. Press Menu/Set button to enter the sub menu. Select Channel Type(ATV) or Channel Type(DTV). Select the Channel Type(ATV) Menu/Set button and press Exit button. You can select Channel Type(Air/Cable) and System Type(NTSC/PAL-M) in Sub Menu “Channel Type”. Select the Channel Type(DTV)

  • OWNER'S MANUAL 65 Specification - 40" LCD Display Size Display Mode Pixel Format Contrast Ratio Brightness Max Input Resolution PIP Input Compatible Video Tuner Module Programming HDTV Input Color Temperature Dimension/Weight Main Only With Stand With Stand and Speaker Miscellaneous Audio External Control Power Consumption Input Power Power Consumption Connectivity TV1, 2 Input Comp

  • Electrograph DTS32LTD, OWNER'S MANUAL 51 Setting the Time In the Time menu, you can set the current time and auto power On/Off. Set the current time. Press Menu/Set button to display the main OSD menu. Select the Time main menu. Press Menu/Set button to enter the sub menu. Select Time Set by pressing button. Move the cursor by pressing / button and adjust time by / button. This TV can be set to turn on automatically at specific time that you choose. Before using the timer, you must set the

  • Electrograph DTS32LTD, OWNER'S MANUAL 48 Language in Advanced Set the language to use in OSD. Supported languages are English, French, Spanish. Select Language and press Menu/Set button. Choose the Language with / button and press Exit button. Front Key Lock in Advanced Lock the OSD panel of the TV. It can protect the TV from children's power On/Off or other operation by miss. Select Front Key Lock and press button to enter the ¥parts. Then the cursor moves into the ¥parts. Turn the function on or off with / button and press Exit button. Setting the Others 1 2 1 2 Advanced Set ID Blue Ba

  • Electrograph DTS32LTD, OWNER'S MANUAL 23 Connecting the Set Top Box Connect set top box video inputs to AV, COMPONENT, HDMI, PC or DVI jacks on the TV. Audio inputs to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs... Turn on the set top box. Press INPUT button on the remote control of the TV and select COMPONENT1, COMPONENT2, HDMI, PC or DVI. With AV Connect a AV cable to the AV jacks of the STB (set top box) and the TV. With Component Connect a three separate component cables to the component jacks of the STB and the TV. Connect L (White) and R (Red) sound cables (Composite)

  • Electrograph DTS32LTD, OSD Menu Tree OWNER'S MANUAL 59 PICTURE [PC MODE] Mode Standard Vivid Mild User H-Position V-Position Divide Phase Auto Adjust Temperature Position WARM2, WARM1, NORMAL, COOL1, COOL2 Video NR On/Off Screen Form 16:9, 4;3 Contrast Brightness Color Sharpness Tint (Only For NTSC) Recall

  • Select sound signal format from the input source. There are Mono, Stereo, SAP sound formats. Press Menu/Set button to display the main OSD menu. Select the Sound main menu with / button on the remote control. Press Menu/Set button to enter the sub menu. Select MTS and press Menu/Set button to enter the sub menu. Then the MTS sub menu appear. Select the MTS

  • Electrograph DTS32LTD, OWNER'S MANUAL 31 Setting the Channel ( TV ) Digest Function With the Digest function, you can select a TV program watching 16 program at once. This function works in TV mode only. Press the DIGEST button on the remote control. You can make off the digest function by pressing DIGEST button again. 16 side windows are renewed clockwise. Next memorized program appear in the renewed windows. To choose the program, press the channel number with the numeric buttons on the remote control. 1 2 1 2

  • Electrograph DTS32LTD, OWNER'S MANUAL 14 PIP (Picture in Picture) Buttons Viewing the Remote Control MTS Choose the MTS (Stereo) mode. Each time it is pressed, different mode is selected. Mono ➔ Stereo ➔ SAP • You can select only available modes depending on the source. INFO Display the current information about time, screen form, source and MTS mode. PICTURE There are 4 picture modes. Standard ➔ Vivid ➔ Mild ➔ User STILL Temporarily freeze the screen and restore it. SOUND Choose the sound equalizer setting

  • Electrograph DTS32LTD, Precaution OWNER'S MANUAL 6 Provide ventilation for the TV. The unit is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block these openings with any object, and do not place the TV on a bed, sofa, rug or other similar surface. Do not place it near a radiator or heat register. If you place the TV on a rack or bookcase, ensure that there is adequate ventilation and that you've followed the manufacturer's instructions for mounting. Setting WARNING When installing the TV on a table, be careful not to place it too close to the edge of the table. - T

  • Electrograph DTS32LTD, OWNER'S MANUAL 55 OSD Menu Tree SETUP Transparency PIP Size Source Picture Swap Position Right Down, Right Up, Left Up, Left Down CC1, CC2, Text1, Text2 Off, Small, Large, Twin V-Chip Caption TV Block Movie Block Change Password V-Chip Blocking V-Chip Blocking On/Off 0~99 Blue Back On/Off National Selections Advanced Set ID Blue Back Language Front Key Lock On/Off Front Key Lock

  • Electrograph DTS32LTD, OWNER'S MANUAL 15 Viewing the Remote Control SOURCE button : Change the source of the PIP window. The available sources are shown as below. MOVE button : Move the position of PIP window. TV HDTV VIDEO1 VIDEO2 S-VIDEO/AV COMPONENT1 COMPONENT 2 PC DVI HDMI – – PIP Main TV VIDEO1 VIDEO2 S-VIDEO/AV COMPONENT1 COMPONENT2 PC DVI HDMI HDTV – – – – – – – – – – – – – – – SWAP button : Swap the sources of the main screen and PIP window. Small Large Twin MODE button : Change the PIP window mode. OFF ➔ Small ➔ Large ➔ Twin Left Up Right Up Left D

  • Electrograph DTS32LTD, OWNER'S MANUAL 62 If your TV is not working properly, please scan this list of problems and possible solutions. It may save you time and money. Troubleshooting Quick Action for Possible Solution Problem No picture & no sound Picture Ok & No sound The remote control doesn't work Digital broadcasting screen problem No or poor color or poor picture The image is too light or too dark The image is too large or too small No output from one of the speakers Strange sound from the TV • Check whether the TV is turned on. • Power cord inserted into wall outlet? • Plug another product's power cord i

  • Electrograph DTS32LTD, OWNER'S MANUAL 17 Installation Installation • Table stand mount minimum allowable clearances for adequate ventilation. Table Stand Installation (optional) Wall Mount Installation (optional) 4 inch(10.16cm) 2.36 inch (5.99cm) 4 inch (10.16cm) 4 inch (10.16cm) < The TV can be installed on the wall as the picture above. > 1.18 inch(Min) 3cm 4 inch(10.16cm) 2.36 inch (5.99cm) 4 inch (10.16cm) 4 inch (10.16cm) 1.18 inch (Min) 3cm < The TV can be installed on the wall as the picture above. > • Install this TV only in a location where adequate ventilation is available.

  • Electrograph DTS32LTD, Always be careful when using your the TV. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves

  • Electrograph DTS32LTD, Precaution OWNER'S MANUAL 5 Follow all operating and use instructions. Do not use the TV where contact with or immersion in water is a possibility, such as near bath tubs, sinks, washing machines, swimming pools, etc. Setting CAUTION Ground outdoor antennas. If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information about proper grounding of the mast and supporting structure, gro

  • OWNER'S MANUAL 18 Installation • Be sure TV power is turned off before making any connections. Place the speakers in the position you want. Install the speaker wires on the TV and speaker. Be sure to connect t he positive " + " wire to the " + " input and the negative " - " wire to the " - " input. Connect le

  • OWNER'S MANUAL 63 Specification - 32" LCD Display Size Display Mode Pixel Format Contrast Ratio Brightness Max Input Resolution PIP Input Compatible Video Tuner Module Programming HDTV Input Color Temperature Dimension/Weight Main Only With Stand With Stand and Speaker Miscellaneous Audio External Control Power Consumption Input Power Power Consumption Connectivity TV1,

  • Electrograph DTS32LTD, Setting the Others OWNER'S MANUAL 49 Use this menu to set Time zone and put daylight saving time into effect. Press Menu/Set button to display the main OSD menu. Select the Setup main menu with / button on the remote control. Press Menu/Set button to enter the sub menu. Select HDTV Setup and press Menu/Set button to enter the HDTV Setup menu. Then the HDTV Setup sub menu appear. Time Zone in HDTV Setup (HDTV Mode) Use this men to select or change Time Zone in the US. Select Time zone menu and press button to enter the ¥part. T

  • Electrograph DTS32LTD, Precaution OWNER'S MANUAL 9 When moving the TV assembled with speakers do not carry holding the speakers. - This may cause the TV to fall, causing serious injury to a child or adult, and serious damage to the TV. Do not use new battery with old one. - This can lead a fire or electric shock caused by leakage liquid from abused batteries. Put the batteries in right direction (+/-). - Otherwise, it can make a fire, injury and pollution caused by bursting of batteries. Only use the specified batteries. - This make cause damaged the TV or could give an electric shock. More than two people are necessary to move or take off the package due to the product’s weightiness. - Otherwise

More Instructions:

DOWNLOAD

Related Products and Documents (TV):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Hotpoint HDA860 Operating instructions hotpoint/hda860-FA2.pdf 09 Dec 2023 4 0.7 Mb
2 Telect T3 Operation & user’s manual telect/t3-2RP.pdf 12 Aug 2023 20 0.81 Mb
3 Frigidaire 318203657 Use & care manual frigidaire/318203657-18D.pdf 02 Jan 2024 10 0.91 Mb
4 Panasonic NV-GS300 How to use manual panasonic/nv-gs300-3XV.pdf 03 Apr 2023 12
5 Husqvarna YTH24K54 Operator's manual husqvarna/yth24k54-48C.pdf 26 Apr 2023 35
6 ADTRAN NetVanta 1131 RPS/EPS Specifications adtran/netvanta-1131-rps-eps-S84.pdf 03 Aug 2023 2 1.09 Mb

Similar Resources:

  • Panasonic

    TH42PD60X - 42" SD PDP TV

    (91 pages)
    PanasonicOperating instructionsDigital Progressive Wide Plasma TelevisionManual de instruccionesTelevisi6n de plasma panor_rnica progresiva digitalModo,No TH'42PD60UNQmero de modeloTH-42PD60XOOro-_ ° H_nrH MDiGiTAL ..................................For assistance, please call : 1-888-VlEW-PTV (843-9788)or contact us at www.panasonic.comlcontactinfo (U. …
  • LG

    42LV3500

    (66 pages)
    LED LCD TVSERVICE MANUALCAUTIONBEFORE SERVICING THE CHASSIS,READ THE SAFETY PRECAUTIONS IN THIS MANUAL.CHASSIS : LT01MMODEL : 42LV350042LV3500-DGNorth/Latin America http://aic.lgservice.comEurope/Africa http://eic.lgservice.comAsia/Oceania http://biz.lgservice.comInternal Use OnlyPrinted in KoreaP/NO : MFL67127804 (1110-REV00) …
  • LG

    32LN540B

    (48 pages)
    OWNER’S MANUALLED TVPlease read this manual carefully before operating your set and retain it for future reference.LN54**LN565*LA61**P/NO : MFL67725403 (1302-REV01)Printed in Korea*LG LED TV applies LCD screen with LED backlights.www.lg.com …
  • Haier

    25F9K-T

    (32 pages)
    COLOUR TV RECEIVER OWNER'S MANUALMAIN FUNCTIONSPlease read this manual carefully before operating the unit, and keep it for future reference. Slide Curtain Power On/Off Display218 Channels PresetMultiple Picture & Sound Modes On/Off TimerChild Lock Soft Change Channel FunctionCount TimeChannels AppointmentDVD Video Component Input Terminals25F9K/ …
  • Toshiba

    15DLV77 - 15" LCD TV

    (2 pages)
    ADVANTAGE TOSHIBA15" Diagonal 4x3, TFT LCD Display with 1024x768 Pixel Resolution, perfect forviewing standard, high definition and analog television signals and DVD movies.Built-In ATSC/NTSC/QAM digital tuning allows for tuning of standard cable channels as well as off-air digital broadcasts, in addition to digital “cable-in-the-clear” broadcasts.B …
  • Magnavox

    55MV387Y

    (58 pages)
    Owner’s manualManual del propietarioManuel du propriétaire1 866 341 3738www.magnavox.com/support/1 866 341 3738www.magnavox.com/support/1 866 341 3738www.magnavox.com/support/55MV387Y50MV387Y …

Comments, Questions and Opinions: