Manualios.com

Canon 430EXII Instruction Manual

Canon 430EXII Manual Online:

4.65, 2664 votes
Canon 430EXII User Manual
Canon 430EXII User Guide
Canon 430EXII Online Manual

Text of Canon 430EXII User Guide:

  • Canon 430EXII, Auto Zoom for Image Sensor Size EOS DIGITAL cameras have one of three image sensor sizes. The lens' effective focal length will differ depending on the camera's sensor size. The Speedlite automatically recognizes the EOS DIGITAL camera's sensor size and automatically sets the flash coverage for lens focal 1 lengths from 24mm to 105mm. When the Speedlite is attached to a compatible camera, <m> will appear on the Speedlite's LCD panel. 1 ETTL zoom 3sm@ About Color Temperature Information Transmission When the flash fires, the color temperature information is transmitted to th

  • Canon 430EXII, Wireless Flash With multiple Canon Speedlites having the wireless flash feature, you can create various lighting effects with the same ease as using normal E-TTL II autoflash. The settings you input with the master unit attached to the camera are also automatically transmitted to the slave units which are controlled by the master unit via wireless. Therefore, you need not operate the slave unit(s) at all during the shoot. For details on wireless flash photography and operating the master unit, see the master unit's instruction manual.

  • Canon 430EXII, Turning on the Power Switch Set the power switch to <ON>. b The flash recycl~ng starts Check that the flash is ready. o When the pllot lamp l~ghts In red, the flash IS ready to fire (fully charged). s To fire a test flash, press the <PILOT> button About Auto Power Off To save battery power, the power will turn off automatically after a certain period (approx. 1.5 min. to 15 min.) of idle use. To turn on the Speedlite again, press the camera's shutter button hal

  • Attaching and Detaching the Flash mmmmm 4 Attach the Speedlite. m Sllp the Speedl~te's mountlng foot Into the camera's hot shoe all the way 11 (The mountlng foot w~ll protrude sl~ghtly from the hot shoe ) Secure the Speedlite. a On the mount~ng foot sl~de the lock lever to the r~ght b When the lock lever cl~cks In place, ~t w~ll be locked

  • Canon 430EXII, Flash Exposure Compensation In the same way as normal exposure compensation, you can set exposure compensation for flash. The flash exposure compensation amount can be set up to +3 stops in 113-stop increments. (If the camera's exposure compensation is in 1/2-stop increments, flash exDosure com~ensation will be in 112-stop increments.) - Press the c@)> button until the icon and compensation amount start blinking. 1 Set the flash exposure compensation amount. a Press the <@> button to set the amount s To cancel the flash exposure -- compensation, set the amount to "+O " j Press the <(?=))> button. b Flash exposure compensation

  • Setting Custom Functions -1 4 Press the <:@:/c.F~> button for 2 sec. or more so that *Qd* is displayed. i 2- Select the Custom Function No. e Press the <G9> button to select the Custom Function number. Eng fm)* Lj kg- /- Qb jw 3 Change the setting. r, Press the <@)> button b The setting number w~ll bllnk. .I, b Pr

  • Canon 430EXII, Bounce Flash By pointing the flash head toward a wall or ceiling, the flash will bounce off the surface before illuminating the subject. This can soften shadows behind the subject for a more natural-looking shot. This is called bounce flash. Set the Bounce Direction r Hold down the <PUSH> button and turn the flash head. u If the flash coverage is set automatically, the flash coverage will be fixed to 50rnrn. The LCD panel will also display <Zoom - -mm>. a You can also set the flash covera

  • Canon 430EXII, Canon This Instructions booklet is dated May 2008. For information on the camera's compatibility with system accessories marketed after this date, contact your nearest Canon Service Center. COPY

  • Canon 430EXII, Thank you for purchasing a Canon product. The Canon Speedlite 430EX II is a multi-feature flash unit for Canon EOS cameras. It works automatically with E-TTL II, E-TTL, and TTL autoflash systems. It can be used as an on-camera flash or as part of a wireless flash system. a Read this instruction manual while also referring to your camera's instruction manual. Before using the Speedlite, read this instruction manual and your camera's instruction manual to familiarize yourself with the Speedlite operations. s The basic operatio

  • Canon 430EXII, Wireless Flash 580EX II . Wireless Flash ................................................ 26 ............. Setting Manual Flash with the Slave Unit 31 Reference 430EX II System ................. ... .......................... 32 Troubleshooting Guide ..................... .. ............... 33 Specifications ...................................................... 35 Using a Type-B Camera ................... .. .............. 37 COPY

  • High-Speed Sync With high-speed sync (FP flash), the flash can synchronize with all shutter speeds. This is convenient when you want to use aperture priority for fill-flash portraits. I ETTL Press the <$HI~ > button so that 9.C" em> is displayed. o Check that the <%H> icon is lit in the viewfinder. @ . If you set a shutter speed that is the

  • Canon 430EXII, The periphery or bottom of the picture looks dark. ct When you set the flash coverage manually, the setting was a higher number than the lens focal length, resulting in a dark periphery. b Set the flash coverage that is a lower number than the lens focal length or set it to auto zoom. (p.18) a If only the bottom of the picture looks dark, you were too close to the subject. b Keep at least 0.7 m12.3 ft away from the subject. The flash exposure is underexposed or overexposed. e

  • Installing the Batteries Install four size-AA batteries. ---I $ Open the cover. a Slide the battery compartment cover as shown by the arrow and open it. Install the batteries. @ Make sure the + and - battery contacts are correctly oriented as shown in the battery compartment. --: 3 Close the cover. a Close the battery compartment cover and sli

  • Canon 430EXII, Setting the Slave ID Set the slave ID if you use two (A and B) or three (A, B, and C) slave groups. , press the <ZOOMI-> button so that <-> blinks. %I w-'d- L?-,-,L Set the slave ID. r Press the button to select the slave ID (A, B, or C), then press the <a@ > button 1- Modeling Flash If the camera has a depth-of-field preview button, pressing it will fire the flash continuously for 1 sec. This is called the modeling flash. It enables you to see the shadow effects on the subject an

  • Canon 430EXII, Set the master unit's flash mode For shoot~ng, <ETTL> will also be set automatically for the slave unit(s). w w v r 7 Check that the flash is ready. a When he slave unltrs) IS ready to f~re (fully charged), the AF-asslst beam w~ll bllnk at I-sec lnte~als ICI d -- @ Check the flash operation. @ @ Press the master unlt's test firlng button b The slave unlt w~ll flre If the flash does not flre, adjust the slave unlt's angle toward the master un~t and dlstance from the master unit 9 Set the camera and shoot. a Set the camera in the same way as wlth normal flash shootlng I Sample wireless flash setup Indoors rrh (430

  • Canon 430EXII, Reference II System O Speedlite 430EX II (Slave unit) O Mini stand (included with 430EX 11) O Speedlite 580EX II (On-cameralMaster unit) @ Speedlite Transmitter ST-E2 Dedicated transmitter for wireless control of 430EX II set as slave units. O Macro Ring Lite MR-14EX 1 @ Macro Twin Lite MT-24EX Flash for macro photography. O Off-Camera Shoe Cord OC-E3 Enables the 430EX II to be connected to the camera up to 60 cm12 ft away. @ Speedlite Bracket SB-E2 COPY

  • Canon 430EXII, -- Using Fully Automatic Wireless Flash Flash exposure compensation and other settings set with the master unit will also be automatically set in the slave units. Thus, you need not operate the slave unit(s). Wireless flash with the following settings can be done in the same way as with normal flash shooting. Flash exposure compensation FEB High-speed sync (FP flash) Manual flash FE lock rn Stroboscopic flash @ . With FE lock, if even one Speedlite will result in underexposure, the <$> icon will blink in the viewfinder. Open the aperture more or move the sl

  • Canon 430EXII, M: Manual Flash You can set the flash output from 1/64 power to 111 full power In 113- stop Increments Use a hand-held flash meter to determine the requlred flash output to obtaln a correct flash exposure Settlng the camera's shoot~ng mode to <Av > or <M> is recommended " Press the <MODE> button so A ' 9; ~oorn3~rnm that <M> is displayed. Set the flash output. ril Press the cL.C> button w The flash output bllnks Press the <aD> button to set the flash output, then press the <@> button Press the shutter button halfway to s

  • Canon 430EXII, The apparatus shall not be exposed to dripping or splashing. Batter~es shall not be exposed to excessive heat such as sunshine, fire or the like. Dry batteries shall not be subjected to charging. European Union (and EEA) only. This symbol Indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (20021961 EC) and your nat~onal law. This product should be handed over to - a designated collection point, e.g . on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic eb equipment (EEE). Improper handling of thi

  • Canon 430EXII, Using Flash ................. Flash Exposure Compensation (*) 14 FE L: FE Lock (*) ............................................ 15 High-speed Sync (*) ................... ... ........... 16 ........................ DSecond-Curtain Sync (* ) ..... 16 Bounce Flash ......................................................... 17 ZOOM: Setting the Flash Coverage (*) and ............................................. Using the Wide Panel 18 M: Manual Flash (*) ........................................... 19 .........

  • Canon 430EXII, Metered Manual Flash Exposures When the Speedlite is attached to an EOS-1 D series camera, you can also set the flash exposure level manually. 9 Set the camera and Speedlite. o Setting the camera's shooting mode to <Av> or <M> is recommended. e Set the Speedlite's flash mode to <M> (Manual flash). 2 Focus the subject. o Focus manually. 3 Set up an 18% gray card. o Place the gray card at the subject's position. r In the viewfinder, the entire spot metering circle at the center should cover the gray card. 4 Press the <FE L> button. (616) b The Speedlite will fire a preflash and the required flash output for the subje

  • Canon 430EXII, Specifications TY pe Type: On-camera. E-TTL IIIE-nL/TTL autoflash Speedlite Compatible cameras: Type-A EOS cameras (E-nL IIIE-TTL autoflash). Type-B EOS cameras (TTL autoflash) Guide No.: 431141 (at 105mm focal length, IS0 100 in meterslfeet) Flash coverage: 24 - 105mm (14mm with wide panel) Auto zoom (Flash coverage set automat~cally to match the lens focal length and Image sensor size) . Manual zoom Flash head swing (bounce flash) Color temperature information transmission: Flash color temperature infor

More Instructions:

DOWNLOAD
DOWNLOAD

Related Products and Documents (Camera Flash):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 oticon Chili BTE 13 SP User manual manual oticon/chili-bte-13-sp-78R.pdf 07 Jan 2023 28
2 Photon Focus MV-D752-28 Operation & user’s manual photon-focus/mv-d752-28-159.pdf 22 Mar 2023 61
3 LENCO BTT-100 Operation & user’s manual lenco/btt-100-K34.pdf 29 Jan 2023 8
4 Supermicro SSH-C48QM Quick installation manual supermicro/ssh-c48qm-H6F.pdf 09 Dec 2023 2
5 Life Fitness Parabody 835 Operation & user’s manual life-fitness/parabody-835-L8N.pdf 21 Jun 2022 10
6 Sony Ericsson T306 Operation & user’s manual sony-ericsson/t306-K9S.pdf 29 May 2023 80 1.52 Mb

Similar Resources:

  • Nissin

    MG8000 Extreme

    (11 pages)
    INSTRUCTION MANUALDIGITAL TTL POWER ZOOM FLASHPlease refer Nissin’s compatibility chart shown in its home page for details and recent updates: http://www.nissin-japan.com or http://www.nissindigital.comSIMPLE OPERATIONWhen attaching MG8000 to the camera, the basic flash exposure operation is fully controlled by the camera. It is the same idea as when you …
  • Dynalite

    MH2065v

    (2 pages)
    DYNALITE INC 1050 Commerce Ave ● Union ● NJ ● 07083 908-687-8800 Phone ● 908-686-6682 Fax www.dynalite.com Dynalite Lighting Controls and System Accessories Instruction Manual For Model MH2065v Fan Cooled Strobe Head Replacement of Modeling Lamp 1. Unplug the flash head from the power pack and allow the flash head to cool before touching the mode …
  • Sony

    HVL-F20S

    (2 pages)
    4-287-030-12 (1)© 2011 Sony Corporation 1, 241Printed in China12354221TELE positionPosition TELEStandard positionPosition standardOperating InstructionsMode d’emploiManual de instruccionesBedienungsanleitungHVL-F20SFlashTo reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualied …
  • Priolite

    MBX 500 HotSync

    (12 pages)
    Instruction manual PRIOLITE MBX 500 - HotSync PRIOLITE GmbH Wuerzburg - Last revised: 12/2013 - Page 12 Contact information. PRIOLITE GmbH Gattingerstr. 7 D-97076 Würzburg Germany Phone: +49 (0)931 20700000 E-mail: [email protected] Internet: http://www.priolite.com . Declaration of Conformity. The company PRIOLITE GmbH Gattingerstr. 7, D-9707 …
  • Godox

    V860II

    (14 pages)
    在使用本产品之前:请先仔细阅读本手册,以确保您能安全使用。请保存好本手册以备将来查询参考。Before using this product:Please read this user manual carefully in order to ensure your safety and the proper operation of this product. Keep for future reference.INSTRUCTION MANUAL说 明 手 册中英文双语 / Chinese En …
  • Sigma

    EF-630

    (214 pages)
    J E D F Es I Dk N Cs Ct K R P F50E17201 ELECTRONIC FLASH EF-630 FOR CANON 使用説明書/INSTRUCTIONS 日本語 4~19 ENGLISH 20~35 DEUTSCH 36~51 FRANÇAIS 52~67 ESPAÑOL 68~83 ITALIANO 84~99 DANSK 100~115 NEDERLANDS 116~131 简体中文 132~147 繁體中文 148~163 한 국 어 164~179 РУCCКИЙ 180~195 PORTUGUÊS 196~211 …

Comments, Questions and Opinions: