COMPRO IP50 - QUICK Installation Manual

Text of COMPRO IP50 - QUICK User Guide:

• 18 4. After enter the valid username and password, Internet will show up the message to warning user to install the ActiveX selection. 5. Please press the selection and choose to install the ActiveX 6. And then the reconfirmation dialog will appear on the screen, please press “Install” button to setup ActiveX up.

• COMPRO IP50 - QUICK, 8 Software Installation: Before ComproView installation, user has to make sure the IP Camera is connected to the network. 1. Insert the ComproView installation CD. 2. Please read the license agreement, then select “I accept the terms of the license agreement”, and then press the “Next” button to continue the install process.

• COMPRO IP50 - QUICK, 27 8. If user wants to add the new IP camera manually, please enter “Camera Name”, “IP Address”, “User Name”, and “Password”. The default user name and password is “admin”. 9. After IP Camera device is decided, the following option could let user to change “Manufacture”, “Model”, “Format”, “Frame Rate”, “Resolution”, “Compression”, “Rotation”, “Enable Audio”, “Enable IO”, and “Enable PTZ”. After all the selections are ready, presses the OK button to close the IP Camera setting. 10. Upon IP Camera Setup is completed, please press “Apply” button to

• COMPRO IP50 - QUICK, 31 Resetting to the Factory Default Setting: This function will cause the IP camera back to the factory default settings, please refer the steps below: 1. Keep pressed the reset button (rear panel) about 10 seconds; user will see the Status Indicator go out. 2. After about 5 seconds, the Status Indicator brightens up again. It means that the IP camera is back to the factory default. 3. Please re-install the Compro IP 50 / 50W using the one of above method.

• COMPRO IP50 - QUICK, 14 11. The default setting is for the IP camera to obtain IP address automatically via LAN connection. 12. To use the wireless network as the primary connection, please tick the “Use the wireless network as the primary connection” option.

• COMPRO IP50 - QUICK, 12 7. After all the setting is ready, please press the “Install” button to start the installation. 8. After the install process completed, the ComproView system is finished the installation. 9. Before using the IP camera, please run the included IP Camera Utility to customize the camera to your local condition. Up on the start of the application, you will be presented with a list of installed IP camera on your network. Please highlight the desired IP camera and click the “Wizard” button.

• COMPRO IP50 - QUICK, 6 Wireless Connection (IP50W only): On the IP50W model, you also have the option of using the wireless connection method. Please keep in mind that you can only have one active connection only, via LAN or wireless. If user connects the IP camera on the intranet, then the same group of user can share that IP camera to use. Please ensure that the wireless antenna had been securely fastened, otherwise it could lead to unstable connection. Important! 1. The operation of the IP50W wireless network may be interfered should there be other 2.4GHz devices working in the vicinity, e.g. microwave oven, digital cordless c

• COMPRO IP50 - QUICK, 16 Using the IP Camera: Compro Technology provides a range of access method to access and using the IP camera that you’ve just installed. 1. Accessing a single camera via the Internet Explorer which is found on all Windows system. This is the easiest way of using the IP camera and requires little learning of the software. 2. Accessing a single camera or multiple cameras via the ComproView Mobile client available on Windows Mobile 5 and 6 smart phones. The current su

• 28 Client for Windows Mobile 5/6 Mobile Phone: The ComproView Mobile client is the perfect companion to remotely access the live video and past video history stored on the ComproView. Its function far surpasses the capabilities offered by the standard 3GPP camera since the 3GPP mode only supports the viewing of live image and without audio. There a

• COMPRO IP50 - QUICK, 25 Manual Installation Should you wish to manually setup the camera, you can do so via the “Setup” button located on the navigation bar. Once the Setup button had been pressed, user should see the main console panel below the live view window, please go for Setup -> Camera menu -> One click for Device column -> Setup 6. After IP Camera setup dialog is opened, if user does not know how to lay on the setting, please press the “Detect” button for search the device. 1 . 2. 3.

• COMPRO IP50 - QUICK, 13 10. On page 1 of the Wizard, you can set the basic setting of the camera, including name, time, port and frequency. Please note, the default value should be used for the best performance. The “Utility Frequency” represents the frequency of your local mains power.

• COMPRO IP50 - QUICK, 15 13. Once all of the previous settings had been done, please press the “Finish” button to finalize the setup of this particular camera. You will need to follow all of the above processes should you wish to set another one. Note: It takes around 1 minute for the camera to apply the setting and operational.

• COMPRO IP50 - QUICK, 5 Mounting: If user wants to set IP50 on the wall, please use the screws to fix the bracket on the flat surface. After the bracket is fixed on the wall, please try to adjust the angle to the desire position. Cable Connections: If user connects the IP camera on the intranet, then the same group of user can share that IP camera to use. 1. Plug in the power adapter to camera. 2. Use the standard RJ-45 network cable to connect with the Compro IP 50(W). Important! If the power cable (IP50W) and the network cable (IP50) are not securely fastened, it could lead to unstable connection.

• COMPRO IP50 - QUICK, 24 5. When you’ve reached the end of the quick setup and wish to setup more than 1 camera in the system, please check the “Use this Wizard to set the next camera” setting and press the finish button to repeat Step4 until all available cameras had been set. Once the above are done, your security system had been set. Lastly, all of the schedule, detection and recording will only be started when you enable the “Start all” option as shown blow. Otherwise the system will only be in passive viewing mode and no alarms will be triggered. Note: You will not be able to

• COMPRO IP50 - QUICK, 29 Up on starting the ComproView Mobile, you will be greeted by the welcome screen with a list of options. Setup: User selectable option for snapshot directory and phone compatibility mode. Connects to ComproView & Playback mode (LAN only): Please enter the IP address of the machine of which the ComproView is installed and currently operational. The user name and password is the combination that the user used to log-on to ComproView. Under this mode, the user can monitor every camera that is connected to ComproView.

• 32 Compro Technology, Inc. www.comprousa.com P/N 3GA0310475 Rev.1.1

• 7 and closed circuit. You can check the status of the circuit by going to the Setup > Event Set > I/O Status. The output port is normally used to trigger external audio or visual indicators, e.g. sirens or strobe lights, etc. Pin Name Specification Note 1 – 4 Digital Input Ports 1 & 2 Max 5VDC, 60mA Floating, TTL 5 - 7 Digital Output

• COMPRO IP50 - QUICK, 19 7. After ActiveX install completed, user could start to use web browser to use IP camera function. Note: If your IP camera falls behind firewalls, you will need to set port forwarding for ports 80 and 554 (default value) to the internal IP address of the camera. Should you have more than one IP camera then please increment the values of the above ports by 1, e.g. the second camera will have ports 81 and 555, etc. Please refer to the manual of your router or firewall.

• COMPRO IP50 - QUICK, 26 7. If the desire model shows up on above column, please select it and press “Add” button to add in the system. There is no need to enter the user name and password manually, unless the user had set a non-default combination to the camera.

• COMPRO IP50 - QUICK, 21 Access the IP Camera via 3GPP Mobile Phone: You can access the desired IP camera via compatible 3GPP mobile phone when both the IP camera has a working internet connection and the mobile phone has a good connection on the GPRS or 3G network. There are several criteria which need to be fulfilled before the 3GPP function can be successfully utilized. 1. In order to use the 3GPP function, you should turn on the 2 nd stream of the IP camera and set the resolution as QQVGA, FPS as 5, and quality as medium. In addition, by enabling the 2 nd stream, you will notice a drop in the frame rate in the primary stream. This is a normal behavior since the ha

• COMPRO IP50 - QUICK, 2 Table of Contents IP50 / 50W Network Camera Hardware Layout ............................................ 3 Assembly and Disassembly ........................................................................ 4 Mounting: ....................................................................................................... 5 Cable Connections: ...................................................................................... 5 Wireless Connection ................................................................

• COMPRO IP50 - QUICK, 17 Web Browser Access (Internet Explorer): User can monitor the current condition of the monitor area via Internet Explorer which is found on all Windows based machine. Please refer the following steps: 1. Open the Internet Explorer. 2. Enter the IP 50 / 50W’s IP address. 3. User will see the dialog to request the user name and password; please enter the valid username and password of IP camera, and then press OK. The default user name and password is “admin”.

• COMPRO IP50 - QUICK, 3 IP50 / 50W Network Camera Hardware Layout Package Contents: * Quick setup guide with software CD (ComproView Manual) * Bracket * DC adapter AC100V-240V in / DC12V * Screws for ceiling mount * LAN cable * Wireless antenna (IP50W only)

• COMPRO IP50 - QUICK, 10 4. Depends on user’s demand to choose the “Complete” or “Custom” selection, and then press the “Next” button to continue the install process. 5. If user chooses the “Complete” selection, please press the “Install” button to start the installation.

Related Products and Documents (Security Camera):

Comparable Devices:

Similar Resources:

• Point Grey LADYBUG 3 1394b (2 pages) Getting StartedLADYBUG®3 1394b Spherical Vision System The following items are included with your Ladybug3 Development Accessory Kit • FWB-PCIE-01: single bus 1394b PCI Express card• ACC-01-2017: 10 meter 1394b cable• FWB-EC-2PORT: 1394b ExpressCard for laptops• ACC-01-9010: 12V 2.0A (24W) power supply for ExpressCard• Tripod Adapter• …

• COHU 3920 SERIES (38 pages) 6X-1026E1INSTALLATION AND OPERATION 3920 iDOMEInstallation and Operation ManualCOHU, INC. ELECTRONICS DIVISION3920 SERIESiDOME CAMERA/POSITIONER SYSTEM Figure 1. [email protected] 21, 2012Technical Manual 6X-1026Ewww.cohu-cameras.com/content/contactus …

• Bosch 200 Series (12 pages) KTS 200d eBetriebsanleitungSystemtester für die Steuergeräte-Di-a gn o see nInstruc tio n m anualSystem tester fo r c o n tro l un it dia gn o -sisf rInstruc tio ns d ‘em p lo iT esteur systè me p o ur dia gn o stic des c en tra les de c o mma n dee sInstruc c io nes d e m anejoC o mp ro b a do r del sistema p a ra dia gn ó -stic o de un ida des de …

• Digital Watchdog Star-Light DWC-V7253WTIR (36 pages) User’s Manual7FS3/19#FGPSFJOTUBMMJOHBOEVTJOHUIFDBNFSBQMFBTFSFBEUIJTNBOVBMDBSFGVMMZ #FTVSFUPLFFQJUIBOEZGPSGVUVSFSFGFSFODF67$5/,*+78QLYHUVDO+'RYHU&RD[70,QGRRU2XWGRRU'RPH&DPHUDV':&9:7,5[70,QGRRUPH&am …

• Clover OW1405 (5 pages) MONITOR 108943 1125 7DC-INCH1VIDE O-INAUDIO -INCH2 CH 3 CH4VIDE O OUTA UDIO OUT1718201519161. POWERON/OFF switch. If you press this switch, the monitor is turned on and the LED of power indicator is lit. 2. CH1 button Pressing this button enables the conversion to CAMERA 1 in MANUAL mode and the corresponding LED is lit. 3. CH2 buttonPressing thi …

• Mobotix M15 (148 pages) www.mobotix.comInnovations – Made in GermanyThe German company MOBOTIX AG is known as the leading pioneer in network camera technology and its decen-tralized concept has made high-resolution video systems cost ecient.MOBOTIX AG • D-67722 Langmeil • Phone: +49 6302 9816-103 • Fax: +49 6302 9816-190 • [email protected]_EN_V6_03/2015M15 Camer …

Comments, Questions and Opinions: