Manualios.com

Canon imagePROGRAF iPF8300 Basic Manual

Canon imagePROGRAF iPF8300 Manual Online:

4.15, 1687 votes
Canon imagePROGRAF iPF8300 User Manual
Canon imagePROGRAF iPF8300 User Guide
Canon imagePROGRAF iPF8300 Online Manual

Text of Canon imagePROGRAF iPF8300 User Guide:

  • Canon imagePROGRAF iPF8300, 30 Do not remove the Maintenance Cartridge except to replace it.• To prevent ink from leaking from a used Maintenance Cartridge , avoid dropping the cartridge or storing it at an angle. Otherwise, ink may leak and cause stains. • Ink adheres to the top of the Maintenance Cartridge after it has been used. Handle the Maintenance Cartridge carefully during replacement. The ink may stain clothing. • Do not replace the Maintenance Cartridge during initialization immediately after turning on the printer, during Printhead cleaning, or when ink is being absorbed. Ink may

  • Canon imagePROGRAF iPF8300, Menu Map 44 EOP Timer Interface Setup TCP/IP IPv4 NetWare AppleTalk NetWare Frame Type IPv4 Mode On Off On Off Automatic Manual IPv6 IPv6 Support On Off IPv6 StlessAddrs On Off DHCPv6 On Off IPv4 Settings DNS Settings Protocol DHCP On Off BOOTP On Off RARP On Off b c F F G G Print Service 30 sec. 10 sec. 5 min. 2 min. 1 min. 60 min. 30 min. 10 min. xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx Subnet Mask IP Address Default G/W Pri. DNS SrvAddr Sec. DNS SrvAddr DNS Dync update DNS Host Name DNS Domain Name Ethernet SNAP Ethernet 802.3 Ethernet 802.2 Ethernet 2 Auto Detect NPrinter NDSPServer BinderyPServer RPrinter * * * * * * Etherne

  • Canon imagePROGRAF iPF8300, 23 Consumables Ink Tanks When purchasing ink tanks, make sure the following Ink Tank serial numbers are printed on the label. Printhead Maintenance Cartridge 330 ml (11.2 fl oz) PC Ink Tank PFI-304PC • C Ink Tank PFI-304C • MBK Ink Tank PFI-304MBK • Y Ink Tank PFI-304Y • M Ink Tank PFI-304M • Maintenance Cartridge MC-08 • Printhead PF-05 • The maintenance cartridge is provided with a shaft cleaner. PM Ink Tank PFI-304PM • R Ink Tank PFI-304R • G Ink Tank PFI-304G • B Ink Tank PFI-304B • PGY Ink Tank PFI-304PGY • GY Ink Tank

  • Canon imagePROGRAF iPF8300, 46 Numerics 2-Inch Paper Core Attachment ................................... 12 3-Inch Paper Core Attachment ................................... 12 C Consumables..............................................................23 F Flange.........................................................................13 I imagePROGRAF Support Information ......................... 5 Ink hole ....................................................................... 26 Ink Lamp ...............................................................25, 29 Ink ta

  • 25 Replacing Ink Tanks If the Tab Selection screen is not displayed, press the Menu button.• 1 2 3 1 Access the menu for ink tank replacement On the Tab Selection screen of the Control Panel , press ◄ or ► to select the Ink tab ( ). Press the OK button. Press ▲ or ▼ to select Rep. Ink Tank , and then press the OK button. A message on

  • Canon imagePROGRAF iPF8300, 1 Printer Operations Basic Guide Read this manual before attempting to operate the printer. Keep this manual in a handy location for future referencing. Printer Operations 1 This Basic Guide includes three booklets. Large-Format Printers 2 Troubleshooting 3 Printer Relocation Printer Driver Installation ENG Read this manual fi rst. Safety Precautions ........................................2 Types of Manuals .............................................5 Documentation Conventions ............................6 Parts .................................................................8 Attaching the

  • Canon imagePROGRAF iPF8300, 10 Parts To recover from Sleep mode, any button can be pressed except the Power button.• Control Panel Lit when sheets are selected as the paper source. Lit when rolls are selected as the paper source. Press this button when loading or replacing paper. (→ , Loading Rolls in the Printer), (→ , Loading Sheets in the Printer) Pressing this button when rolls are loaded enables you to reposition the paper. Pressing this button when rolls are loaded cuts the paper. Displays the screen before the current screen. Press this button on the Tab Selection screen to move to another tab. In menu items requiring numerical input, pre

  • Canon imagePROGRAF iPF8300, 18 If the Tab Selection screen is not displayed, press the Menu button.• If you need to cut a roll, see the following procedure. (→"Specifying the Cutting Method for Rolls," User Manual) • If you have selected ManageRemainRoll > On in the Control Panel menu, a barcode is printed on the leading edge of the roll. • Do not remove the roll before the barcode is printed. You will be unable to keep track of the amount of roll paper left. (→"Keeping Track of the Amount of Roll

  • Canon imagePROGRAF iPF8300, Menu Map 45 Date & Time Date Prep.MovePrinter hh:mm Paper Info Ink Info Head Info System Info Other Counter Error Log Printer Info Change Password Init.Admin.Pswd Admin. Menu yyyy/mm/dd Time Paper Size Basis Reset PaprSetngs Sht Selection 1 ISO A3+ 13"x19"(Super B) Sht Selection 2 ISO B1 28"x40" (ANSI F) Length Unit feet/inch meter Keep Paper Size On Off Use RemoteUI Off On Print After Recv On Off Common Box Set. Print (Auto Del) Print Date Format dd/mm/yyyy mm/dd/yyyy yy

  • Canon imagePROGRAF iPF8300, 15 Loading Rolls in the Printer Be careful not to drop the roll and hurt yourself when loading it.• Be careful not to pinch your fi ngers between the Roll Holder shaft (a) and the guide grooves (b) when loading rolls. • If the paper is wrinkled or warped, straighten it out before loading it.• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the printing quality. • For paper that tends to curl, lift the Release Lever and manually pull the roll paper over the Platen .• Load the roll so that there is no gap between the right edge of the paper and the Roll Holder . • 4 5 Holding t

  • Canon imagePROGRAF iPF8300, 16 Loading Rolls in the Printer You can adjust the strength of suction holding paper against the Platen when the Release Lever is released. If it is diffi cult to load paper, press the ▲ or ▼ button on the Control Panel to adjust the strength. Set suction stronger by pressing the ▲ button or weaker with the ▼ button. Three settings are available. • Do not omit steps 7 and 8. If paper cannot be advanced straight or if it wrinkles, it may jam or rub against the Printhead . • Do not force the roll paper into alignment with the paper align

  • Canon imagePROGRAF iPF8300, 31 Replacing the Maintenance Cartridge If the Tab Selection screen is not displayed, press the Menu button.• 1 2 3 4 On the Tab Selection screen of the Control Panel , press ◄ or ► to select the Settings/Adj. tab ( ). Press the OK button. Press ▲ or ▼ to select Maintenance , and then press the OK button. Press ▲ or ▼ to select Repl. Maint. C , and then press the OK button. A message on the Display Screen advises you to open the Maintenance Cartridge Cover . Access the menu for maintenance cartridge replacement The Set./Adj. Menu is displayed. Printing OK:Settin

  • 7 Canon Large Format Printer iPF8300 FCC Regulations (U.S.A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment

  • Canon imagePROGRAF iPF8300, 33 Replacing the Maintenance Cartridge Always put the used Maintenance Cartridge back in the box and store the box on a fl at surface. Otherwise, ink may leak and cause stains. • Support the Maintenance Cartridge Cover from underneath as you wipe it.• 4 6 5 7 8 Attach the packaging material to the used Maintenance Cartridge and put it in the box. Keep it level as you put it in the plastic bag. Expel excess air from the plastic bag and seal the zipper. Wipe away any soiling on the Maintenance Cartridge Cover . Confi rm the Maintenance Cartridge is right-side up, put it in the box, and store it so tha

  • Canon imagePROGRAF iPF8300, 4 Safety Precautions Never disassemble the printer or attempt repairs. There are high voltage parts inside the printer that can cause a fi re or electrical shock. • Never use fl ammable sprays around the printer. The gas of fl ammable sprays can cause a fi re or electrical shock, if it contacts high voltage points inside the printer. • During printing, turn on the ventilation system in the room.• After removing the Cutter Unit , never touch the cutting edge (a). This could cause personal injury.• We recommend e

  • Canon imagePROGRAF iPF8300, 24 There may be ink around the ink supply section of ink tanks you removed. Handle ink tanks carefully during replacement. The ink may stain clothing. • Ink Tank replacement is possible even during printing, when print jobs are being canceled, or when paper is being advanced. • Do not remove an Ink Tank during initialization immediately after turning on the printer, or during printhead cleaning.• We recommend using up an Ink Tank in the course of printing within six months after breaking the seal. Printing quality may be affected if you use older ink tanks. • Do not leave the printer without ink tanks installed for extended

  • Canon imagePROGRAF iPF8300, 6 Documentation Conventions Symbols The following symbols are used in this document to indicate safety information and explanations of restrictions or precautions in use. Caution Indicates caution items for which operating error poses a risk of injury or damage to equipment or property. To ensure safe use, always follow these precautions. Important Indicates important information that must be followed when using the printer. Be sure to read this information to prevent printer damage or operating errors. MEMO Indicates helpful reference information and supplemental information on particular topics

  • Canon imagePROGRAF iPF8300, 9 Parts Do not touch the Carriage Shaft (d) or Linear Scale (j). Touching these parts may damage them.• OperationName a b c d e f g h i j k Top Cover (Inside) Top Cover Roller Paper Alignment Line Carriage Carriage Shaft Paper Retainer Platen Borderless Printing Ink Grooves Cleaning Brush Fixed Blade Linear Scale Switch Prevents paper from rising when ejected. Align paper with this line when loading it. Moves the Printhead . The carriage serves a key role in printing. The Carria

  • 19 Removing the Roll from the Printer See the following procedure for instructions on removing the Roll Holder from the roll.• (→"Removing Rolls From the Roll Holder," User Manual) To load new paper in the printer at this point, see the following procedure.• (→ , Loading Rolls in the Printer) Clean inside the top cover before loading paper.• (�

  • Canon imagePROGRAF iPF8300, 14 Always load rolls when the printer is on. If the printer is off when you load a roll, the paper may not be advanced correctly when you turn the printer on. • If any paper has been advanced that will not be used, a message is shown requesting you to remove it.• Press ▲ or ▼ to select Yes , and then press the OK button. Remove the paper and go to the next step. Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide . If these areas are dirty, we recommend cleaning them in advance. (→ , If Paper is Soiled) • 1 2 3 Press the Load button. Press ▲ or ▼

  • Canon imagePROGRAF iPF8300, 39 Replacing the Printhead Dispose of the used Printhead in accordance with local regulations.• 4 5 6 7 Pull up the Carriage Cover to open it completely. Pull the Printhead Fixer Lever forward all the way to open it completely. Pull up the Printhead Fixer Cover to open it completely. Remove the Printhead and press the OK button.

  • Canon imagePROGRAF iPF8300, 28 Replacing Ink Tanks Ink tanks cannot be loaded in the holder if the color or orientation is incorrect.• If the Ink Tank does not fi t in the holder, do not force it into the holder. Make sure the color of the Ink Tank Lock Lever matches the color of the Ink Tank , and check the orientation of the Ink Tank before reloading it. 3 4 Press the OK button and insert the Ink Tank into the holder with the ink hole facing down, as shown. Lift the Ink Tank Lock Lever until it stops, and then push it down until it clicks into place. 700 ml tanks 330 ml tanks 700 ml tanks 330 ml tanks P M R G

  • 13 Attaching the Roll Holder to Rolls 2 3 4 With the edge of the roll paper facing forward as shown, insert the Roll Holder from the right of the roll. Insert it fi rmly until the roll touches the fl ange (a) of the Roll Holder , leaving no gap. Insert the Holder Stopper from the left in the Roll Holder as shown. Holding it at the position shown (b), push it

Related Products and Documents (Office Equipment):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Braun P40 Operation & user’s manual braun/p40-41U.pdf 07 Jul 2023 15 3.19 Mb
2 Canarm PLF09 Instruction manual canarm/plf09-2NX.pdf 08 Mar 2023 12
3 Ultratec Uniphone 1140 Manual  ultratec/uniphone-1140-PS3.pdf 23 Apr 2023 4 1.19 Mb
4 Briggs & Stratton 19D Operating and maintenance manual briggs-stratton/19d-5XW.pdf 17 Nov 2022 6 0.27 Mb
5 HoMedics DocknParty DP-300 Instruction manual homedics/docknparty-dp-300-9ID.pdf 10 Dec 2022 12 1.15 Mb
6 Fossil FUEL ANA DIGI MODULE Manual  fossil/fuel-ana-digi-module-419.pdf 10 Nov 2022 1 0.07 Mb

Similar Resources:

  • Xerox

    WorkCentre 5638

    (10 pages)
    WorkCentre5632/5638/5645/5655/5665/5675/5687LOAD PAPERTOUCH SCREEN - Displays all the available features and general machine informationCLEAR ALL - Resets features to their default settingsPAUSE - Interrupts current jobSTART - Starts the jobFEATURES: Displays the job features on the screenJOB STATUS: Displays the job queue informationMACHINE STATUS: Displays …
  • NEC

    SV-8100

    (1 pages)
    NEC SV8100 ADMINISTRATOR USER GUIDE Changing the System Time Without lifting the receiver;  Press the Speaker key  Dial 7 2 8  Enter the new time  Press the Speaker key to save & exit NOTE: Enter time in 24 hour format HHMM Changing User Extension Names Without lifting the receiver;  Press the Speaker key  Dial 7 0 0  …
  • NEC

    SV-8100

    (738 pages)
    NoticeNote that when converting this document from its original format to a .pdf file, some minor font and format changes may occur. When viewing and printing this document, we cannot guarantee that your specific PC or printer will support all of the fonts or graphics. Therefore, when you view the document, fonts may be substituted and your individual prin …
  • Canon

    imageRUNNER ADVANCE C7065

    (12 pages)
    1multifunction systembrilliant color/black-and-whitehigh volume advancing businessmultifunction printer high-speed, high-volumecolor/black and white=44713A=:CB7=<A …
  • Canon

    imagePROGRAF iPF6300S

    (52 pages)
    1Printer OperationsTroubleshooting2Be sure to read " Safety Precautions" in the fi rst booklet, Printer Operations. Read this manual before attempting to operate the printer.Keep this manual in a handy location for future referencing.This Basic Guide includes three booklets. ENG3Printer RelocationSoftware Installation2TroubleshootingBasic GuideLa …
  • Dahle

    550

    (9 pages)
    @ @ O @ O @ @ @ @ @ @ @ Bedienungsanleitung @ 0peratinginstructions @ Instructionsdeservice @ Manualde instrucciones @ Istruzioni per fuso @ Manualde instruqöes @ Gebruiksaanwijzing @ Betjeningsvejtedning @ Laitteenkäyttöohje @ Bruksanvisning @ B ru ksanvisning @ Hasznälatiutasftäs 550 552 5s4 5s6 ss8 750 Navodilozauporabo Instrukcjaobstugi KullanmaKrla …

Comments, Questions and Opinions: