Manualios.com

Canon imageRUNNER ADVANCE C9075S PRO Safety Instructions

  • imageRUNNER ADVANCE C9075S PRO Office Equipment
  • mahItzfvaLOhs
  • Safety Instructions
  • PDF / Adobe Acrobat Reader
  • 48

Canon imageRUNNER ADVANCE C9075S PRO Manual Online:

4.9, 2677 votes
Canon imageRUNNER ADVANCE C9075S PRO User Manual
Canon imageRUNNER ADVANCE C9075S PRO User Guide
Canon imageRUNNER ADVANCE C9075S PRO Online Manual

Text of Canon imageRUNNER ADVANCE C9075S PRO User Guide:

  • Canon imageRUNNER ADVANCE C9075S PRO, Select a safe power supply • Connect the plugs of the imageRUNNER ADVANCE C9075S PRO/C9065S PRO to an outlet that is 208V 15A or greater. • Make sure that the power supply for the machine is safe, and has a steady voltage. • Do not connect other electrical equipment to the same power outlet to which the machine is connected. • Do not connect the power cord to a multiplug power strip, as this may cause a fire or electrical shock. • The power cord may become damaged if it is stepped on, affixed with staples, or if heavy objects are placed on it. Continued use of a damaged power cord can lead to an accident, such as a fire or electrical shock. • The power cord should not be taut

  • Canon imageRUNNER ADVANCE C9075S PRO, # CAUTION • The fixing unit and its surroundings inside the machine may become hot during use. When removing jammed paper or when inspecting the inside of the machine, do not touch the fixing unit and its surroundings, as doing so may result in burns or electrical shock. • When removing jammed paper or when inspecting the inside of the machine, do not expose yourself to the heat emitted from the fixing unit and its sur- roundings for a prolonged period of time. Doing so may result in low temper- ature burns, even though you did not touch the fixing unit and its surround- ings directly. • If a paper jam occurs, follow the directions on the touch panel display to re- move any jammed pap

  • Canon imageRUNNER ADVANCE C9075S PRO, ( side) (The shape of the power plug may differ depending on your location.) • Do not turn the main power switch OFF or open the front covers while the ma- chine is in operation. This may result in paper jams. • Do not use flammable sprays, such as spray glue, near the machine. There is a danger of ignition. • This machine generates a slight amount of ozone and other substances during normal use. Although sensitivity to these substances may vary, this amount is not harmful. Ozone may be more noticeable during extended use

  • Canon imageRUNNER ADVANCE C9075S PRO, Contents Chapter 1 Preface.................................................................................................................3 Read the Safety Instructions thoroughly..................................................4 Chapter 2 How to use this manual.....................................................................................5 Symbols used in this manual....................................................................6 Chapter 3 Legal Notices.......................................................................................................7 Legal Notices........................................................................

  • Canon imageRUNNER ADVANCE C9075S PRO, CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands CANON LATIN AMERICA, INC. 703 Waterford Way Suite 400 Miami, Florida 33126 U.S.A. CANON CHINA CO., LTD 15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China CANON SINGAPORE PTE. LTD. 1 Ha rbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632 CANON HONGKONG

  • Canon imageRUNNER ADVANCE C9075S PRO, # CAUTION • When removing jammed paper or replacing the toner cartridge, take care not to allow the toner to come into contact with your hands or clothing, as this will dirty your hands or clothing. If they become dirty, wash them immedi- ately with cold water. Washing them with warm water will set the toner, and make it impossible to remove the toner stains. • When removing paper which has become jammed inside the machine, remove the jammed paper gently to prevent the toner on the paper from scattering and getting into your eyes or mouth. If the toner gets into your eyes or mouth, wash them immediately with col

  • Canon imageRUNNER ADVANCE C9075S PRO, Checking the breaker 1. Push the test button on the rear of the machine with the tip of a ballpoint pen, or a sim- ilar object. # IMPORTANT • Briefly push the test button. # NOTE • The breaker is located on the rear of the machine. 2. Confirm that the breaker lever is switched to the OFF ("O" side) position. ON ( I side) OFF ( side) # IMPORTANT • Do not use the test button to turn the power ON and OFF. If the breaker lever does not switch to the OFF ("O" side) position, repeat step 1. If the breaker le

  • Canon imageRUNNER ADVANCE C9075S PRO, Laser Safety This product complies with 21 CFR Chapter 1 Subchapter J as a Class I laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Perfor- mance Standard according to the Radiation Control for Health and Safety Act of 1968. Also, this product is certified as a Class 1 laser product under IEC60825-1:2007. This means that the product does not produce hazardous laser radiation. Since radiation emitted inside the product is completely confined within protective housings and external covers, the laser beam cannot escape

  • Canon imageRUNNER ADVANCE C9075S PRO, Introduction This machine has a breaker that detects excess current or leakage current. Make sure to test the breaker once or twice a month using the following procedure. # IMPORTANT • Make sure that the main power is turned OFF, before inspecting the breaker. • If a malfunction occurs after an inspection, contact your local authorized dealer. Chapter 6 - Inspection of the breaker40 Introduction

  • Canon imageRUNNER ADVANCE C9075S PRO, # CAUTION • The laser beam can be harmful to human bodies. Since radiation emitted inside the product is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation. Read the following remarks and instructions for safety. • Never open covers other than those instructed in the manuals for this machine. • Do not remove the following caution label which is attached to the machine. If the label has been removed, contact your local authorized dealer. • I

  • CAUTION • Do not remove the machine's level- ing feet after the machine has been installed, as this may cause the ma- chine to fall or tip over, resulting in personal injury. Chapter 4 - Important safety instructions16 Installation

  • Other warnings # WARNING For cardiac pacemaker users: This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from the product and consult your doctor. Chapter 4 - Important safety instructions26 Other warnings

  • Canon imageRUNNER ADVANCE C9075S PRO, Handling precautions • Do not attempt to disassemble or modify the machine. • Some parts inside the machine are subject to high voltages and temperatures. Take adequate precautions when inspecting the inside of the machine. Do not carry out any inspections that are not described in the manuals for this machine. • Be careful not to spill liquid or drop any foreign objects, such as paper clips or staples inside the machine. If a foreign object comes into contact with electrical parts inside the machine, it might cause a short circuit and result in a fire or electrical shock. • If there is smoke, or unusual noise, immediately turn the main power switch OFF, disconnect the power cord

  • Canon imageRUNNER ADVANCE C9075S PRO, Introduction This section describes precautions for installation location and handling. We recommend that you read this section prior to using this machine. Chapter 5 - Installation location and handling28 Introduction

  • Canon imageRUNNER ADVANCE C9075S PRO, 3. Switch the breaker lever to ON ("I" side). ON ( I side) OFF ( side) 4. Press the main power switch to the ON ("I" side) position. ( I side) 5. Fill in the check sheet, located on the next page, to document your periodic inspections of the breaker. Chapter 6 - Inspection of the breaker42 Checking the breaker

Related Products and Documents (Office Equipment):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Epson Stylus CX9400 Specifications epson/stylus-cx9400-RCE.pdf 01 Jul 2023 2 0.25 Mb
2 Electrolux T8 Instructions manual electrolux/t8-E8B.pdf 15 Aug 2023 20 2.23 Mb
3 Black Box LPS530A-MM Operation & user’s manual black-box/lps530a-mm-W62.pdf 28 Feb 2023 8
4 Philips TDA1576T Datasheet philips/tda1576t-Z8W.pdf 22 Apr 2023 16 0.09 Mb
5 Black & Decker BLD100 Series Use and care book black-decker/bld100-series-8N7.pdf 19 Sep 2023 2 0.27 Mb
6 Speed Queen HG4080 Operating instructions speed-queen/hg4080-9M2.pdf 16 Sep 2022 5

Similar Resources:

  • Canon

    imageCLASS MF8450c

    (60 pages)
    Starter GuideOverview of Machine FunctionsSet Up the Machine to Suit Your PurposesSet Up the MachineSet Up Computers and SoftwareAppendixPlease read this guide before operating this product.After you nish reading this guide, store it in a safe place for future reference. …
  • LEVENGER

    CIRCA PORTABLE PUNCH

    (2 pages)
    CIRCA PORTABLE PUNCHTO PUNCH PAPERThe Circa Portable Punch handles up to threesheets at a time and weighs just 9 ounces. It’salso useful for punching 3 x 5 and businesscards to file in your Circa notebook or agenda.Swing out the paper/disc line-up rule fromthe underside of the punch.1Lift the paper holderand slide up to 3 sheetsof paper under, at thesame …
  • Dauphin

    Syncro-Automatic @Just magic2 Series

    (2 pages)
    QS+Ergo-Nackenstütze - optional:7 cm höhenverstellbar und 40° neigbar.Ergo Neckrest - optional:7 cm height-adjustable and 40° tiltable.@Just magic2 operator (light)DGBBedienungsanleitung/Owners manualSitzneigeverstellung: Die Sitzneigung kann in drei Stufen eingestellt werden (-1°/-3,5°/-6°). Einstellung der Sitzneigung auf -6°: Drehen Sie den Hebel …
  • BISLEY

    Glide V2

    (15 pages)
    Glide V2 Assembly Instructions Level the unit One Left and one Right handed unit. Place inner sides together matching front and tops and level units using adjustable feet …
  • THERMOBIND

    TB300

    (3 pages)
    USER MANUAL FOR THERMOBIND TB300 ①Operating Instructions: 1. Plug the unit directly into an 110-120Volt outlet and turn on the power switch located at the right rear. The RED Power light will be on during warm-up. ( about 90 seconds) 2. When the YELLOW “ready” light comes on, the machine is set for binding. 3. Fill your thermal binding cover wi …
  • Narbutas

    Silent Room M

    (3 pages)
    OPERATION MANUALSAFETY AND WARNINGS Inappropriate use of this product may cause property or bodily injury.Check surroundings on all sides before using the furniture. Do not lean any objects neither to wall, nor to glass facade.Ensure power cords are s …

Comments, Questions and Opinions: