Manualios.com

Canon imageRUNNER ADVANCE C9075S PRO Operation & User’s Manual

  • imageRUNNER ADVANCE C9075S PRO Office Equipment
  • mahItzfvaLOhs
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 20

Canon imageRUNNER ADVANCE C9075S PRO Manual Online:

3.95, 1723 votes
Canon imageRUNNER ADVANCE C9075S PRO User Manual
Canon imageRUNNER ADVANCE C9075S PRO User Guide
Canon imageRUNNER ADVANCE C9075S PRO Online Manual

Text of Canon imageRUNNER ADVANCE C9075S PRO User Guide:

  • Canon imageRUNNER ADVANCE C9075S PRO, Copyright © 2011 Océ All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted in any form or by any means without written permission from Océ. Océ makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further, Océ reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation to notify any person of such revision or changes. Edition: 2011-07

  • Canon imageRUNNER ADVANCE C9075S PRO, Contents Chapter 1 Instructions for safe use.....................................................................................5 Instructions for safe use............................................................................6 Chapter 2 Regulation notices............................................................................................11 Regulation notices....................................................................................12 Chapter 3 General information.........................................................................................17 Caution labels and notations......................

  • Instructions for safe use Introduction All products have been tested in accordance with the strictest international safety standards. Please read the following sections before you connect the machine to the power supply. These sections contain important information with regard to the user safety and the prevention of equipment problems. Make sure that you observe the safety rules

  • Canon imageRUNNER ADVANCE C9075S PRO, Disassemble and modification Warning • Do not remove covers and panels which are fixed to the machine. Some machines have a high-voltage component or a laser beam source inside that could cause electrical shock or blindness • Do not modify this machine, because this could cause a fire, electrical shock or breakdown. If the machine contains a laser, the laser beam source could cause blindness. Caution • Do not place any liquids on the machine. • To avoid any risk, only properly qualified and authorized service technicians are

  • Grounding Warning • Connect the power cord to an electrical outlet (wall socket) that is equipped with a grounding terminal. • This equipment was not designed for connection to an IT power system. An IT power system is a voltage network in which the neutral wire is not grounded. Installation Warning • Make sure that the machine is placed on a level, horizontal s

  • Canon imageRUNNER ADVANCE C9075S PRO, • LCD display. Do not rub, press or touch the display surface with hard material, because the polarizer at the surface can be easily scratched. The LCD module consists of glass. Therefore, the LCD module can damage when you drop, pinch strongly or punch the module. If glass breaks, be careful that you do not get injured by the glass fragments. Contact your authorized service representative. Moving the machine Caution • Make sure that you disconnect the power cord and other cables before you move the machine. • Make sure that you check the documentation

  • Canon imageRUNNER ADVANCE C9075S PRO, Regulation notices Introduction This section describes the regulation notices. Radio Interference suppression (all countries except USA) Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. FCC approval (USA-only) This system has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the system is operated in a commercial environment. This system generates, uses, and can radiate radio frequen

  • Canon imageRUNNER ADVANCE C9075S PRO, with the CDRH regulations and must be attached to laser products marketed in the United States. Caution Use of controls, adjustments, or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. This is a semiconductor laser. The maximum power of the laser diode is 21 mW and the wavelength is 658 nm. Mercury (All Countries) At the end of the equipment's service life the mercury-containing fluorescent lamp must be removed from the equipment and treated separately according Directive 2002/96/EC (Waste Electrical and Electronic Equipment). Dispose of in accordan

  • End of Life; WEEE (EU-only) The symbol "the crossed-out wheeled bin" indicates that at end-of-life of the equipment separate collection is required in the EU Member States. The black bar specifies that the appliance is put on the market after August 13, 2005. Reference: Directive 2002/96/EC. Contact your local organization for further information. RoHS (China- only)

  • Canon imageRUNNER ADVANCE C9075S PRO, Automatic duplex Using both sides of paper reduces paper costs, national energy consumption and the amount of paper in the waste disposal process. Therefore, thePRISMAsync is default set for automatic duplex copying and printing. Chapter 2 - Regulation notices 15 Regulation notices

  • Canon imageRUNNER ADVANCE C9075S PRO, Caution labels and notations Introduction You can find the power-marking label at the bottom side of the controller. If connection to a different mains voltage is required, contact your authorized service representative. Do not remove caution labels or caution notations. If a label or notation is soiled, please clean the label or notation. If you cannot make label or notation legible, or if the label or notation is damaged, please contact your service representative. Operating environment The environmental requirements for correct operation of the machine are as follows: • Operating temperature (T): 10 °C (50 °F) to 40 �

  • - Beyond the Ordinary o Printing for Professionals Creating global leadership in printing Canon and Océ have joined forces to create the global leader in the printing industry. For our customers, this combines Canon and Océ technology with the support of the Océ direct sales and service organizations. Look to the new Canon-Océ combination for: • Enterprise pr

Related Products and Documents (Office Equipment):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Simple Audio AV200 Operation & user’s manual simple-audio/av200-O19.pdf 18 Jun 2023 16
2 Casio QV R40 - 4 MP Mini Digital Camera Operation & user’s manual casio/qv-r40-4-mp-mini-digital-camera-HQ6.pdf 03 Sep 2022 177 6.28 Mb
3 Omron HR-100 Instruction manual omron/hr-100-S9C.pdf 17 Jul 2023 29
4 Brocade Communications Systems 5100 Quick start manual brocade-communications-systems/5100-5F7.pdf 06 Mar 2024 2
5 Advantech AIMB-226 Operation & user’s manual advantech/aimb-226-26R.pdf 17 Oct 2023 108
6 ViewSonic VA902 Operation & user’s manual viewsonic/va902-XFC.pdf 05 Dec 2022 22 0.57 Mb

Similar Resources:

  • Canon

    imagePROGRAF iPF6350

    (12 pages)
    QT5-2356-V1 ©CANON INC. 2010 Printed in JAPAN1Setup GuideENGIntroductory InformationMEMO• Some of the items included in the package are not explained in this Setup Guide, such as the spacer for borderless printing. Keep these items in a safe place after setup because they are used in various printing applications.• For instructions on using items not …
  • Wiremold

    Access 5000

    (2 pages)
    Access®5000 Raceway SystemINSTALLATION INSTRUCTIONSInstallation Instruction No.: 40478R5 – Updated July 2005Wiremold Electrical Systems conform to and should be installedand properly grounded in compliance with requirements of the current National Electrical Code, Canadian Electrical Code orcodes administered by local authorities.All electrical products …
  • Reiner

    D53V

    (4 pages)
    www.reiner.deAward forOperationalExcellenceBedienungsanleitungOperating instructionsMode d’emploiManual de instruccionesIstruzioni per l’usoInstruções de utilizaçãoInstrukcja obsługiР  цDGBFEIPPLRUSDziękujemy Państwu za to, że zdecy …
  • Opex

    Falcon Transportable

    (44 pages)
    © 2014, 2015, 2018 OPEX® CorporationAll rights reserved. This document is provided by OPEX for use by their customers, partners, and dealers. No portion of these materials may be reproduced, published, or stored in a database or retrieval system, other than for its in-tended use without the express, written permission of OPEX Corporation.March 15, 2018Docu …
  • IBM

    ELECTRONIC MULTIPLIER

    (165 pages)
    I BM ELECTRIC PUNCHED CARD ACCOUNTING MACHINES CUSTOMER ENGINEERING MANUAL OF INSTRUCTION ELECTRONIC MULTIPLIER TYPE 603 INTERNATIONAL BUSINESS MACHINES CORPORATION NEW YORK. NEW YORK …
  • Samsung

    SH-S222L - DVD±RW / DVD-RAM Drive

    (1 pages)
    123 45When using one EIDE cable • Connect the cable to the SL (Slave) of the Master/Slave Select Terminal at the rear of the DVD Writer. When using two EIDE cable• Connect the cable to the MA (Master) of the Master/Slave Select Terminal at the rear of the DVD Writer. - If there is only one Optical drive: select MA (Master).Hard DriveSlave Drive …

Comments, Questions and Opinions: