Canon CP-100 Operation & User’s Manual

Text of Canon CP-100 User Guide:

• Canon CP-100, 53 Appendices About the Print Area and Pixels Print Area The shaded area ( ) in the following diagrams indicates the maximum printable area. Note that because the print area is larger than the actual paper size, a border is trimmed from the image when it is printed. (shown in millimeters) ■ CP-100 L size sheet 2.0 2.0 2.7 2.7 89.0 119.0

• Canon CP-100, 61 ■ Errors where printing is canceled If any of the following messages appear, printing is canceled. After using the recommended solution to clear the error, you need to start the print job over again. Correction : After closing the dialog, turn the printer off and then back on again. Paper is automatically ejected from the print receptacle or the paper handling slot. Remove the paper and then turn the printer off and back on again a second time, and start the print job over. Sometimes with the CP-100, credit card size sheets are not automatically ejected. If this happens, remove the paper cassette, put your finger in

• Canon CP-100, 56 Troubleshooting This section describes how to troubleshoot problems. Correction : Make sure the indicator light on the printer is green. (➡ p.32) Correction : Check the USB cable to make sure it is connected correctly. (➡ p.33) Correction : Try the following procedure. <Windows 98/Me/2000> 1.Click the [Start] button and select [Settings], and [Printers]. 2.Right-click the [Canon CP-100] or [Canon CP-10] icon. If “Use Printer Offline” is selected, clear it. <Windows XP> 1.Click the [St

• Canon CP-100, 3 Appendices ..............................................................................................53 About the Print Area and Pixels ......................................................53 Print Area ...................................................................................53 Number of Pixels .......................................................................55 Troubleshooting ..............................................................................56 Error Messages ..............................................................

• Canon CP-100, 60 Correction : Insert the correct paper cassette. Correction : Insert the correct ink cassette. Correction : Insert the correct ink cassette and paper. Correction : Use a new or fully charged battery pack, or use the printer with the AC adapter (compact power adapter) connected. The paper cassette differs from the setup. Please check the paper cassette. Press [Resume] to resume, or [Cancel] to stop. Cause : The paper cassette in the printer is not suitable for the print settings. The specified Ink Cassette cannot be found.

• Canon CP-100, 42 2 Click the [Properties] button. At this point, do not change the printer. 3 Click the [Print Settings] tab, and then set the print orientation and the number of copies. For details, click the [?] button or [Help] button to see the online help. When printing from PhotoRecord, this should be selected.

• Canon CP-100, 48 Printing Part of an Image (Trimming) You can select and then print a portion of an image (trimming). This is useful when you only want to print part of an image, or if the part you are most interested in is not at the center of the image. 1 Right-click the image you want to print, and then select [Clip/ Correct Photo]. If you specify borderless or select multiple printing as the print mode, a frame appears for you to select the area to print. • You can print selected portions of an image in any print mode. • The length-to-width ratio cannot be modified if you select the settings below. - For CP-100 “CP-100 standard printing - Bo

• 2 Contents Safety Precautions ....................................................................................4 Read This First ..........................................................................................5 About the Manuals ............................................................................5 Printing Flow Diagram .........................................

• Canon CP-100, 31 5 When the installer panel appears, click “Exit”. 6 Start Windows Explorer, and then double-click the [\CP_DRV\ENGLISH\UNINST] folder on the CD-ROM drive to open the folder. 7 Double-click [CNYCPUN.EXE] icon to start the uninstaller. The uninstaller starts. 8 From the list of printers available for deletion, select [Canon CP-100] and then click the [Delete] button. If you are using the CP-10, select [Canon CP-10]. 9 When the confirmation message appears, check the printer name and then clic

• Canon CP-100, 25 Windows XP 1 Close any programs that are running. 2 Turn the printer on. (➡ p.32) 3 Connect the printer to your computer, using the USB cable. (➡ p.33) After a moment, the Found New Hardware Wizard dialog appears. 4 Place the Canon Digital Camera Solution Disk in the CD-ROM drive. 5 Select “Install the software automatically (Recommended)”, and then click the [Next] button. Log on to Windows XP with administrator privileges before installing the software.

• 43 4 Click the [Image Adjustment] tab, and then adjust the brightness and color of prints. For details, click the [?] button or [Help] button to see the online help. 5 When you finish adjusting the settings, click the [OK] button to close the Properties dialog. If you do not want to see the messages relating to printer temperature increase, or messages tell

• 35 Printing This section describes how to use PhotoRecord to print images registered in ZoomBrowser EX. ZoomBrowser EX and PhotoRecord are applications included on the Canon Digital Camera Solution Disk. These applications make it easy to print. Screen shots from Windows XP are used for illustration, but the procedure is the same with Windows 98/Me/2000. Before printing, verify tha

• Canon CP-100, 44 6 Adjust other settings, and then click the [Print] button. Printing starts. If you stop printing while printing is in progress, paper is ejected to the paper handling slot and an error message may be displayed. This is not a malfunction, but a mechanism for protecting the print head. If you interrupt printing while it is in progress, be sure to check the printer status. ➀ When the indicator light is green: You can continue to print. ➁ When the indicator light is red: Temporarily remove paper from the paper handling slot. Turn the printer off and then back on again. Make

• Canon CP-100, 21 Windows 2000 1 Close any programs that are running. 2 Turn the printer on. (➡ p.32) 3 Connect the printer to your computer, using the USB cable. (➡ p.33) After a moment, the Found New Hardware Wizard dialog appears. 4 Click the [Next] button. Log on to Windows 2000 with administrator privileges before installing the software.

• Canon CP-100, 23 8 Click the [Browse] button, select the [CNY100.inf] file in the [\CP_DRV\ENGLISH\WIN2K\CP100] folder on the CD-ROM, click the [OPEN] button, then click the [OK] button. For the CP-10, select the [CNY10.inf] file in the [\CP_DRV\ENGLISH\WIN2K\CP10] folder. This displays the Browse dialog. Specify the [CNY100.inf] file in the [\CP_DRV\ENGLISH\WIN2K\CP100] folder or the [CNY10.inf] file in the [\CP_DRV\ENGLISH\WIN2K\CP10] folder, and then click the [Open] button to enter the folder path at [Specify a location].

• Canon CP-100, 40 3 Select the paper size, and then click the [Finish] button. Close the PhotoRecord Print Modes window. The print mode settings are now reflected in the album page window. To open the PhotoRecord Print Modes window again, click (print modes) in the PhotoRecord layout window. ■ With CP-10 1 From the [Printer] drop-down list, select [Canon CP-10]. The printer setup dialog appears. 2 For [Print Mode], select “Photo printer standard printing” and then click the [Next] button.

• Canon CP-100, 17 Windows Me 1 Close any programs that are running. 2 Turn the printer on. (➡ p.32) 3 Connect the printer to your computer, using the USB cable. (➡ p.33) After a moment, the Add New Hardware Wizard dialog appears. 4 Place the Canon Digital Camera Solution Disk in the CD-ROM drive. 5 Select “Automatic search for a better driver (Recommended)” and then click the [Next] button.

• Canon CP-100, 27 If you have problems with the printer driver installation (for example, the printer driver’s installation program stops during the installation), the USB driver may not be installed correctly. 1 When the Add New Hardware Wizard dialog appears, click the [Cancel] button to cancel the installation. 2 Make sure power is supplied to the printer (its indicator light is green), and that the printer is connected to your computer with the USB cable. 3 Click the [Start] button and select [Settings], and [Control Panel]. 4 Double-click the [System] icon. Troubleshooting the Printer Driver Installation (Windows 98/Me) Us

• Canon CP-100, 5 Read This First About the Manuals This user guide describes how to connect the printer to a computer and print images. CP-100 or CP-10 User Guide Provides printer handling notes, safety precautions, printer preparation, names of parts and other information necessary for operating the printer. Please read before using the printer. This user guide Describes how to connect the printer to a computer, printer driver installation, functions and operating procedures. Detailed explanations of operating procedures are given in the [Help] accompanying ea

More Instructions:

	Canon CP-100 Brochure 18-11-2023 2	DOWNLOAD
	Canon CP-100 Operation & user’s manual 24-08-2023 60	DOWNLOAD
	Canon CP-100 Connection manual 25-09-2022 76	DOWNLOAD
	Canon CP-100 Operation & user’s manual 08-04-2023 108	DOWNLOAD

Related Products and Documents (Printer):

Comparable Devices:

Similar Resources:

• HP 930c - Deskjet Color Inkjet Printer (96 pages) HP Two-Sided Printing Accessory User’s GuideAccessoire d’impression recto-verso HPGuide d’utilisationAccesorio de impresión por las dos caras de HPGuía del usuarioAcessório HP de impressão em ambos os lados de uma páginaGuia do usuárioHP Duplexeinheit für doppelseitigen DruckBenutzerhandbuchAccessorio per la stampa fronte-retro HP Manuale uten …

• HP Color LaserJet Pro MFP M476 dw (24 pages) ENInstallation GuideLea esto primeroM476 dwM476 nwM476 dnFRGuide d’installationDEInstallationshandbuchITGuida all'installazioneESGuía de instalaciónESCAGuia d’instal lacióHRCSDA …

• Star SM-L200 SERIES (43 pages) Mobile Printer SM-L200 SERIES Hardware Manual …

• Xerox Nuvera 100 EA (24 pages) January 2015 702P00782 Xerox Nuvera® Xerox Production Stacker Operator Manual Xerox Nuvera® 100/120/144/157 EA Production System Xerox Nuvera® 100/120/144 MX Production System Xerox Nuvera® 200/288/314 EA Perfecting Production System Xerox Nuvera® 200/288 MX Perfecting Production System …

• HPRT MT800 (53 pages) Mobile PrinterMT800User ManualXiamen Hanin Electronic Technology Co., Ltd.Add: 5F, 8#, Aide Airport Industrial Park, Huli District, Xiamen, ChinaWeb: www.hprt.com …

• Microcom 428TM (243 pages) MODEL 428TM DIRECT THERMAL PRINTER OPERATOR’S MANUAL PART NUMBER: 880042-0141 August 28, 2013 CPC Copyright © 2013 by Microcom Corporation, Lewis Center, Ohio – All rights reserved. Printed in the United States of America …

Comments, Questions and Opinions: