Manualios.com

Canon VB-M40 Operation Manual

Canon VB-M40 Manual Online:

4.85, 1195 votes
Canon VB-M40 User Manual
Canon VB-M40 User Guide
Canon VB-M40 Online Manual

Text of Canon VB-M40 User Guide:

  • Canon VB-M40, 1-10  Enabling the Sound Function to Use Audio In Windows Server 2008, the sound function is disabled by default. To receive audio with the VB-M40 Viewer, follow the procedure below to enable the sound function. Note If [Control Panel] is in the classic view, double-click [Sound]. Notes on Use with Windows Vista/ Windows 7 The following restrictions apply when using the camera with Windows Vista or Windows 7.  RM-Lite For more important information on the RM-Lite operating environment, see the “Administrator's Manual.” 1 Open [Control Panel]

  • Canon VB-M40, 6-16 2 [Intelligent Function (Image Detection)] The status of intelligent function (image detection) will be displayed. When the detection settings configured in intelligent functions (Moving Object Detection, Abandoned Object Detection, Removed Object Detection or Camera Tampering Detection) enter Detected mode, the corresponding icon will turn green (P. 5-27). If names are entered in [Detection Setting Name] in Intelligent Function Setting Tools (P. 5-27), [Setting 1] to [Setting 15]

  • Accessing the Top Page of the Camera 3-3 3 Top Page of the Camera Accessing Admin Viewer To access the Admin Viewer, click 4. For more details on the Admin Viewer, see “Chapter 6 Admin Viewer/VB Viewer.” Accessing VB Viewer To access the VB Viewer, click 5. For more details on the VB Viewer, see “Chapter 6 Admin Viewer/VB Viewer.” For more information on the d

  • Canon VB-M40, 5-9 5 Admin Tools A panorama image capture/creation tool that shows the entire area that can be captured by this camera. When performing pan, tilt, or zoom operations, setting presets using the viewer, etc., you can see at a glance which part of the entire area the set area is occupying. Admin Viewer Preset Setting Tool Panorama Creation Tool Important If the privacy mask settings were changed using the Privacy Mask Setting Tool, it is recommended that you recreate the panorama image to reflect the new privacy mask setting

  • Canon VB-M40, [Event] Image Buffer, Volume Detection, Audio Playback and Timer Settings 4-21 4 Setting Page 8 [Upload] Select the upload operation to be performed. If [Enable] is selected, upload is performed when a volume detection event occurs. To use this function, the [General Upload] sub-menu and [HTTP Upload] or [FTP Upload] sub-menu must also be set from the [Upload] menu (P. 4-15). 9 [E-mail Notification] Select the e-mail notification operation to be performed. If [Enable] is selected, e-mail notification is performed when a volume detection event

  • Canon VB-M40, SD Memory Card Access 7-3 7 Appendix  JPEG Images Stored when Upload Fails JPEG images that have failed to upload are saved under the file names “000.JPG” to “999.JPG” in subdirectories “00” to “99,” which are created under “camera IP address/mnt/card/CANON/UPLOAD.” When either the storage capacity of the SD memory card or the number of files that can be saved in all subdirectories is reached, you cannot save to the SD memory card. In this case, use FTP software to download to a PC. Delete JPEG images no longer needed.  Log Files Log files are saved in “Camera's IP address/mnt/card/CANON/LOG” with the file na

  • 5-16 A tool that lets you set presets and the home position. You can make the desired settings with the mouse by referring to the preview in the panorama mode. You can also set “Preset Tour” whereby the camera tours and monitors multiple presets. Preset Setting Tool Set preset tour after the presets have been set. Preset Setting Tool Important If you want

  • 4-9 4 Setting Page Camera Name [Camera Name] Be sure to enter [Camera Name (alphanumeric characters)]. Up to 15 ASCII characters (spaces and printable characters) may be used for [Camera Name (alphanumeric characters)]. Note • The camera name set here will be shown when the camera is registered for use with bundled RM-Lite. Initial Camera Settings 1 [AE Mode], [

  • Canon VB-M40, 4-10 3 [Metering Mode] Set the metering mode when the camera starts. [Center-Weighted] The entire screen is metered by focusing on the center of the screen. Even when slightly darker/brighter areas are present on the periphery of the screen, an appropriate exposure can be achieved for the subject near the center. Use this mode if the subject is positioned near the center of the screen. [Average] The entire screen is metered by averaging. A stable exposure can be achieved even in a capture environment where there are notable brightness differences within the screen. Use this mode to stabilize the exposure in location

  • Canon VB-M40, Performing Operations and Settings as the Administrator 6-13 6 Admin Viewer/VB Viewer Setting the Focus Select [Auto], [Manual] or [Fixed at Infinity] for focus setting. [Auto]: Automatically focuses on the subject. [Manual]: You can adjust the focus manually by pushing the (far) and (near) buttons. Clicking [One-shot AF] will use autofocus to focus on a subject and then stop in manual focus. [Fixed at Infinity]: You can set the focus so that it is fixed near infinity. Setting the Exposure You can set various options relating to exposure operation. 1 Exposure Mode Select f

  • Canon VB-M40, 5-20 Note • Up to 20 presets can be set. • Changes to preset settings are not reflected in already connected viewers. • You can disable presets in the viewer by clearing the [Show in viewers] checkbox under [Detailed settings]. • Preset positions cannot be set in the digital zoom area. Preset Tour Set a preset tour whereby the camera tours and monitors the multiple presets currently set.  [Preset Tour] Tab Display Screen 1 [Preset Tour] selection box. Select when you want to perform a preset tour from the following options. [Not us

  • Canon VB-M40, 4-24 Note If the same address is duplicated, the policy for the address that appears highest on the list will be applied. IPv6 Host Access Restrictions 1 [Apply Host Access Restrictions] Set IPv6 host access restrictions to [Disable] or [Enable]. 2 [Default Policy] If IPv6 host access restrictions are applied, select [Authorize Access] or [Prohibit Access] for the default policy. 3 [Prefix / Prefix Length] Create a list of permitted hosts and restricted hosts and set IPv6 address access for each host to [Yes] or [No]. You can specify the prefix length and set access restriction by network or host. If access is prohibited, access to all ports is restricted. Importa

  • Canon VB-M40, 6-8 Move by clicking Clicking a point in the panorama window moves the pan and tilt to center on that point. Move by dragging Dragging the yellow frame lines in the panorama window moves the pan and tilt to capture that area. Note • Operations carried out by clicking on the image will not be precise. • Users operating the camera in the Admin Viewer with the administrator authorities can control the camera outside the view restrictions. Users operating the camera in the Admin Viewer with the authorized user authorities can control the camera only within the view restrictions. • Users operating the camera in the VB Viewer can con

  • 4-20 Image Buffer 1 [Frame Rate] Set the frame rate that applies when images are temporarily saved in the image buffer at the moment an event occurs. 2 [Pre-event Buffer (number of image frames)] Set the number of images to be buffered before the event. 3 [Post-event Buffer (number of image frames)] Set the number of images to be buffered after the event. V

  • Canon VB-M40, x Precautions for Use Precautions for Use of Intelligent Functions, Image Stabilizer and Bundled Network Video Recording Software RM-Lite Notes on Cleaning Maintenance Turn off the power before cleaning the camera.  Cleaning of Exterior 1 Dampen a soft cloth with water or diluted neutral detergent and wipe away the grime gently. 2 Wipe with a dry cloth.  Cleaning of Lens Use a commercial lens cleaner to remove grime on the lens surface. • Auto focus may not work properly if the lens surface is dusty or dirt

  • Canon VB-M40, 7-34 P Pan .................................................................. 5-15 Panorama Creation Tool ................................... 5-9 Capturing .................................................. 5-10 Panorama Display ...................................... 6-5, 6-6 Panorama Display Area ............................. 6-7, 6-8 Panorama Screen .................................. 5-13, 5-17 Parameters ............................................... 4-15, 7-4 Password ...............................

  • Canon VB-M40, List of Log Messages 7-19 7 Appendix S410 Event service initialization error [crit] S411 External input/output service initialization error [crit] S412 Timer service initialization error [crit] S413 Timer service runtime error [crit] Description event initialization error [%1] [%2] (S410) %1 Error number %2 Cause of error Meaning An error occurred in the initialization of the event service. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. Description extio initialization error [%1]

  • Canon VB-M40, Preset Setting Tool 5-19 5 Admin Tools Setting the Preset A preset can be set in one of the following two ways.  Setting from Camera Angle in the Image Display Area  Use the preview frame of the panorama screen to set presets. Use the preview frame of the panorama screen to set presets. Be sure to enter the preset name. If you click on the panorama image, the preview frame will move to center on the clicked point. The settings are reflected in the preview frame on the panorama screen and the image display area. If you previewed incorrect settings, etc., and want to restore the settin

  • Canon VB-M40, v Table of Contents Chapter 3 Top Page of the Camera Accessing the Top Page of the Camera ...................................................................3-2 Accessing the Top Page of the Camera............................................................................. 3-2 Accessing the Setting Menu ............................................................................................... 3-2 Accessing the Admin Tools ................................................................................................ 3-2 Accessing Admin Viewer ....

  • Canon VB-M40, Notes on Operating Environment 1-9 1 Before Use For details on registering trusted sites, click the [Learn more about Internet Explorer's Enhanced Security Configuration] in the dialog box in step 1 and read the overview. Note that even when the content block dialog box does not appear, JavaScript is sometimes disabled under the standard security settings, which may limit operations on the setting page and the VB-M40 Viewer. Register the page as a trusted site as this automatically enables JavaScript settings. If the content block d

  • Canon VB-M40, 4-33 4 Setting Page Tool 1 [View Logs] Display a history of camera operations and connections to each viewer, etc. 2 [View Current Settings] Display a list of current settings. 3 [Reboot] The camera is rebooted. 4 [Restore Settings] Discard user-defined settings and restore all setting items to factory default settings except camera administrator password, network setting, date, time, time zone, SSL certificate and encrypted communication. Executing this operation will reboot the camera automatically. Note • It is recommended that you write down all current setting values before restoring f

  • Canon VB-M40, 7-2 You can set the camera so that the following data is saved automatically to the camera's SD memory card. (“Chapter 4 Settings Page”, “[Memory Card] SD Memory Card Operations and Settings” (P. 4-30). • JPEG images stored when HTTP or FTP upload failed during network errors •Log Here is an explanation of how to access the data saved on the SD memory card.  Access to the SD Memory Card Use FTP software (not bundled) to access the camera's IP address. FTP Software Settings Address: Camera IP address (factory default setting: 192.168.100.1) User ID: Administrator user ID (factory default setting: root) Password: Administrator password (factory default se

  • How to Operate the Viewer 6-7 6 Admin Viewer/VB Viewer How to Operate  Camera Control Privilege Status Indicator Display of the camera control buttons and camera control status indicator changes according to the status of control privileges shown as follows. Controlling the Camera This is a guide to the basic operations of the camera. These operations can be carried out in both the Admi

  • Canon VB-M40, 3-4 Certificate Registration In order to use [Admin Tools] and [Admin Viewer], you must first install the two certificates issued by Canon Inc. on your PC. The certificates are stored on the Setup CD- ROM. Follow the procedure below to register the certificate using Internet Explorer. After confirming that all other applications have been closed, click [Start] menu > [Computer]. Double-click the CD-ROM icon that appears > Applications folder > Certificate folder > admintools1. The [Certificate] dialog box will appear. (1) Select [Place all certificates in the following store]. (2) Click [Browse], select [Intermediate Certification Author

  • Canon VB-M40, iii Notes on the Bundled Software RM-Lite (Disclaimer) Flaws or other problems with RM-Lite may result in recording failure or destruction or loss of recorded data. Canon shall have no liability whatsoever for any loss or damages incurred by the user as a result of such problems. Notes on License Agreement for Bundled Software For information on the License Agreement for Bundled Software, refer to the next file in the BundledSoftware folder in the Bundled Setup CD-ROM LICENSE folder. European Union (and EEA) only. These symbols indicate that this product is not to be dispos

Related Products and Documents (Security Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Troy-Bilt Horse Parts catalog troy-bilt/horse-4AR.pdf 17 Aug 2023 21 5.14 Mb
2 Draytek Vigor130 Operation & user’s manual draytek/vigor130-995.pdf 09 Oct 2022 148 3.13 Mb
3 Vizio VF550XVT Operation & user’s manual vizio/vf550xvt-GYN.pdf 26 Jun 2022 101 3.73 Mb
4 Holux M-241 Manual  holux/m-241-BIO.pdf 16 Aug 2022 4 0.28 Mb
5 Esam 4000 Instructions esam/4000-E7F.pdf 05 Oct 2022 5
6 Sealite SLC500 Installation & service manual sealite/slc500-57L.pdf 06 May 2023 28

Similar Resources:

  • Axis

    AXIS P3353

    (54 pages)
    INSTALLATION GUIDEENGLISH DEUTSCHITALIANOESPAÑOLFRANÇAISAXIS P3353 Network CameraAXIS P3354 Network CameraAXIS P3363-V Network CameraAXIS P3364-V Network CameraAXIS P3364-LV Network Camera …
  • Lorex

    LNE8964A SERIES

    (2 pages)
    • You can use a RJ45 coupler or switch (not included) to connect male ends of Ethernet cable together.• To extend the cable run beyond 300ft (92m), a switch will be required (sold separately).Audio SettingsATTENTION: Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation assumes no liability for use of its products that do …
  • VADDIO

    999-8700-000

    (24 pages)
    © 2012 Vaddio - All Rights Reserved. Vaddio WEBBi - Document Number 342-0445 Rev A VADDIO™ WEBBi™ Web based Room Control System for Vaddio EasyUSB™ Tools Part Numbers: 999-8700-000: WEBBi Web Controller (North America) 999-8700-001: WEBBi Web Controller (International) Installation and User Guide …
  • Hama

    00053101

    (82 pages)
    00053101/08.09All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.Hama GmbH & Co KGD-86651 Monheim/Germanywww.hama.comSoftware: (D) (GB)(D) Dieses Gerät darf nur in den folgenden Ländern betrieben werden:(GB) The operat …
  • SHARX SECURITY

    HTNC4420PTZ

    (10 pages)
    Quickstart Guide Sharx Security HTNC4420PTZ Full HD 60 fps ONVIF PoE PTZ IP Camera Pan/Tilt/Zoom speed dome camera with 20 X optical zoom and continuous auto focus …
  • Interlogix

    UltraView

    (76 pages)
    UltraView IP PTZ 36X Camera Quick Start Guide EN UltraView IP PTZ 36X Camera Quick Start Guide DE UltraView IP PTZ 36X-Kamera - Kurzanleitung ES Guía de inicio rápido de la cámara UltraView IP PTZ 36X FR Guide de démarrage rapide de la caméra UltraView IP PTZ 36X IT Guida di avvio rapido telecamera UltraView IP PTZ 36X NL UltraView IP PTZ 36X� …

Comments, Questions and Opinions: