Manualios.com

Conceptronic 150N Operation & User’s Manual

Conceptronic 150N Manual Online:

4.55, 1705 votes
Conceptronic 150N User Manual
Conceptronic 150N User Guide
Conceptronic 150N Online Manual

Text of Conceptronic 150N User Guide:

  • Conceptronic 150N, 31 2-5-5. Setup procedure for ‘L2TP’: Here are descriptions of every setup items: User ID Please input user ID (user name) assigned by your Internet service provider here. Password Please input the password assigned by your Internet service provider here. L2TP Gateway Please input the IP address of PPTP gateway assigned by your Internet service provider here. MTU Please input the MTU value of your network connection here. If you don‟t know, you can use default value. Connection Type Please select the connection type of Internet con

  • Conceptronic 150N, 50 After you finish the wireless setting, please click „Apply‟ button, after you click „Apply‟, the following message will be displayed on your web browser: Please click „Continue‟ to back to previous setup menu; to continue on router setup, or click „Apply‟ to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is rebooting). 2-7-2. Advanced Wireless Settings This router provides some advanced control of wireless parameters, if you want to configure these settings, please click „Wireless‟ menu on the left of web managemen

  • Conceptronic 150N, 45 2-7-1-2. Setup procedure for ‘Station-Infrastructure’: In this mode, you can connect the router to Ethernet device such us TV, Game player, HDD&DVD to enable the Ethernet device be a wireless station and join to a wireless network through an access point or AP router. Here are descriptions of every setup items: Band Select the band you want to use. SSID This is the name of wireless network. You can type the SSID of the network you would like to connect here. Site Survey When you use this wireless ro

  • Conceptronic 150N, 72 Current Trigger-Port All the settings for the special applications will be listed here. If you want to remove some Special Application settings from the " Current Trigger-Port Table", select the Special Application settings you want to remove in the table and then click "Delete Selected". If you want remove all Special Appliacation settings from the table, just click "Delete All" button. Click "Reset" will clear your current selections. Delete Please select a special application by clicking the „Select‟ box of the mapping

  • Conceptronic 150N, 55 2-7-3-3. Wi-Fi Protected Access (WPA): When you select this mode, the wireless router will use WPA encryption, and the following setup menu will be shown on your web browser: Here are descriptions of every setup items: WPA Unicast Cipher Suite Please select a type of WPA cipher suite. Available options are: WPA (TKIP), WPA2 (AES), and WPA2 Mixed. You can select one of them, but you have to make sure your wireless client support the cipher you selected. Pre-shared Key Format Select the type of pre-shared k

  • Conceptronic 150N, 98 4-3. License Agreement Licensing Information This Conceptronic product C150BRS4 includes copyrighted third-party software licensed under the terms of the GNU General Public License. Please see The GNU General Public License for the exact terms and conditions of this license. All used software packages are copyright by their respective authors. Please see the source code for detailed information. Availability of source code Conceptronic. has exposed the full source code of the GPL licensed software, including any scripts to control compilation a

  • Conceptronic 150N, 96 4-2. Glossary Default Gateway (Router): Every non-router IP device needs to configure a default gateway‟s IP address. When the device sends out an IP packet, if the destination is not on the same network, the device has to send the packet to its default gateway, which will then send it out towards the destination. DHCP: Dynamic Host Configuration Protocol. This protocol automatically gives every computer on your home network an IP address. DNS Server IP Address: DNS stands for Domain Name System, which allows Internet servers to have a domain name (such as www.Broadbandrouter.com) and one or more IP addresses (such as 192.34.45.8). A DNS server keeps a dat

  • 54 RADIUS Server IP Address Please input the IP address of radius server here RADIUS Server Port Please input the port number of radius server here. RADIUS Server Password Please input the port number of radiuspassword here. Tips: Some examples of WEP key (Don‟t use those examples; use the one of your own!): ASCII (5 characters): pilot

  • Conceptronic 150N, 13 2-3-2. Setup procedure for ‘Static IP’ Here are descriptions of every setup items: IP address Please input IP address assigned by your service provider. Subnet Mask Please input subnet mask assigned by your service provider DNS address Please input the IP address of DNS server provided by your service provider. Gateway Address Please input the IP address of the Gateway provided by your service provider. You must use the addresses provided by your Internet service

  • Conceptronic 150N, 40 2-6-3. Static DHCP Leases Table: This function allows you to assign a static IP address to a specific computer forever, so you don‟t have to set the IP address for a computer, and still enjoy the benefit of using DHCP server. Maximum 16 static IP addresses can be assigned here. (If you set ‘Lease Time’ to ‘forever’ in ‘DHCP Server’ section, you can also assign an IP address to a specific computer permanently, however, you will not be able to assign a certain IP address to a spec

  • Conceptronic 150N, 2-6. Wired LAN Configurations 2-6-1. LAN IP section 2-6-2. DHCP Server 2-6-3. Static DHCP Leases Table 2-7. Wireless LAN Configurations 2-7-1. Basic Wireless Settings 2-7-1-1. Setup procedure for ‘AP' 2-7-1-2. Setup procedure for ‘Station-Infrastructure' 2-7-1-3. Setup procedure for ‘AP Bridge - Point to Point’ 2-7-1-4. Setup procedure for ‘AP Bridge - Point to Multi Point’ 2-7-1-5. Setup procedure for ‘AP Bridge - WDS’ 2-7-1-6. Setup procedure for ‘Universal Repeater' 2-7-2. Advanced Wireless Set

  • Conceptronic 150N, 4 Chapter II: System and network setup 2-1. Build network connection Please follow the following instruction to build the network connection between your new WIRELESS router and your computers, network devices: A. Connect your xDSL / cable modem to the WAN port of router by Ethernet cable. B. Connect all your computers, network devices (network-enabled consumer devices other than computers, like game console, or switch / hub) to the LAN port of the router. C. Connect the A/C power adapter to the wall socket, and then connect it to the „Power‟ socket of the router. D. Please check all LEDs on the front panel. „PWR

  • Conceptronic 150N, 87 3-4-2. Internet Connection Status You can use this function to know the status of current Internet connection. Please click „Internet Connection‟ menu on the left of web management interface, and the following message will be displayed on your web browser: This information will vary depending on the connection status. 3-4-3. Device Status You can use this function to know the status of your router. Please click „Device Status‟ menu on the left of web management interface and the following message will b

  • Conceptronic 150N, 32 Please click „Continue‟ to back to previous setup menu; to continue on other setup procedures, or click „Apply‟ to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is rebooting). If you want to reset all settings in this page back to previously-saved value, please click „Cancel‟ button. 2-5-6. Setup procedure for ‘Telstra Big Pond’: This setting only works when you‟re using Telstra big pond‟s network service in Australia. You need to input: User Name Please input the user name assigned by Telstra. Password Please input the password assigned by Telstra. Assign login server manually

  • Conceptronic 150N, 73 3-2-5. UPnP Setting This function enables network auto-configuration for peer-to-peer communications, with this function, network devices will be able to communicate with other devices directly, and learn about information about other devices. Many network device and applications rely on UPnP function nowadays. Please click „NAT‟ menu on the left of web management interface, then click „UPnP‟, and the following message will be displayed on your web browser: There is only one option in this page, please select „Enable‟ or „Disable‟ to enable or disable UPnP function, then click �

  • Conceptronic 150N, 38 2-6-1. LAN IP section: Here are descriptions of every setup items: IP address Please input the IP address of this router. Subnet Mask Please input subnet mask for this network. 802.1d Spanning Tree If you wish to activate 802.1d spanning tree function, select „Enabled‟ for setup item „802.1d Spanning Tree‟, or set it to „Disabled‟ DHCP Server If you want to activate DHCP server function of this router, select „Enabled‟, or set it to „Disabled‟. Recommended Value if you don’t know what to fill: IP Address: 192.168.0.1 Subnet Mas

  • Conceptronic 150N, 46 2-7-1-3. Setup procedure for ‘AP Bridge-Point to Point’: In this mode, you can connect your wireless router with another, to combine two access points and expand the scope of wireless network, and all clients (wired only – AP will not accept wireless clients in this mode) of two wireless routers will think they‟re on the same physical network. This function is very convenient when you need to connect two networks between two buildings. Here are instructions about how to connect two wireless rou

  • 48 2-7-1-5. Setup procedure for ‘AP Bridge – WDS’ In this mode, you can expand the scope of network by combining up to four other access points together, and every access point can still accept wireless clients. Note: For WDS mode, the output signal nature is the same as that of normal AP mode. Here are descriptions of every setup items: Band

  • 63 Here are descriptions of every setting: Enable QoS Check this box to enable QoS function, unselect this box if you don‟t want to enforce QoS bandwidth limitations. Total Download Bandwidth You can set the limit of total download bandwidth in kbits. To disable download bandwidth limitation, input „0‟ here. Total Upload Bandwidth You can set the limit of total uplo

  • Conceptronic 150N, 3 1-4. Familiar with your new wireless broadband router Front Panel LED Name Light Status Description PWR On Router is switched on and correctly powered. WLAN On Wireless WPS function is enabled. Off Wireless network is switched off. Flashing Wireless LAN activity (transferring or receiving data). WAN LNK/ACT On WAN port is connected. Off WAN port is not connected. Flashing WAN activity (transferring or receiving data). LAN 1-4 LNK/ACT On LAN port is connected. Off LAN port is not connected. Flashing LAN activity (transferring or receiving data). Back Panel Item Name Description Antenna It is 3dBi dipole a

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Redring SB2 Installation & operating instructions manual redring/sb2-GX3.pdf 04 Jan 2023 12
2 ResMed escape s8 Operation & user’s manual resmed/escape-s8-TN9.pdf 15 Oct 2023 39 0.61 Mb
3 WLM Acoustic Sonata Owner's manual wlm-acoustic/sonata-72P.pdf 17 May 2023 9
4 Juniper J4350 Getting started manual juniper/j4350-754.pdf 15 Aug 2022 332
5 George Foreman GRP4P Use and care book manual george-foreman/grp4p-684.pdf 26 Jul 2022 15 0.6 Mb
6 Digidim Hevlar 924 Installation and user manual digidim/hevlar-924-VQG.pdf 25 May 2023 58

Similar Resources:

  • Polycom

    SpectraLink 6000 System

    (4 pages)
    SoundStation® IP 6000 Quick Start GuideThank you for choosing the Polycom SoundStation® IP 6000, a conference telephone that provides high quality audio conferencing over an IP network.These items are included in your SoundStation IP 6000 package. If you are missing any items, contact your SoundStation IP 6000 reseller.Parts ListOptional AccessoriesExterna …
  • NETGEAR

    WN2000RPTv1

    (2 pages)
    Universal WLAN Repeater N/GWN2000RPTInstallationsanleitungLieferumfangLED-Anzeigen des ExtendersÜbertragungsrate (Verbindung zwischen dem Router und dem Extender)*Die Verbindung zum Router ist schlecht.Die Verbindung zum Router ist gut.Die Verbindung zum Router ist hervorragend.Status des ExtendersDer Extender ist eingeschaltet.Verbindung zwischen dem PC un …
  • 2N

    EasyRoute

    (99 pages)
    2N® EasyRoute UMTS Data and Voice Gateway User Manual Version 1.06 www.2n.cz …
  • NetComm

    NP740n

    (2 pages)
    NP740n – Quick Install Guide1 Set your Broadband Modem into Bridge ModeNote: Refer to your Broadband Modem User Manual for instructions.2 Connecting your Router• Power off all your devices• Using your Ethernet cable, connect your Broadband Modem to the WAN port found at the back of the Router.• Connect your PC to any LAN port (1,2,3,4)• Conn …
  • Linksys

    WET200 - Wireless-G Business Ethernet Bridge

    (3 pages)
    BUSINESS SERIESPRODUCT DATAModel: WET200Wireless-G Business Ethernet BridgeHigh-Speed Wireless Bridging for Small BusinessesThe Linksys WET200 Wireless Bridge seamlessly bridges separate Ethernet networks together wirelessly and is ideal for small businesses with offices and resources that are in different office suites of a building or a closely adjacent bu …
  • Humminbird

    AS RSL

    (13 pages)
    Thank You!Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by design-ing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-freeuse in even the harshest marine environment. In the unlikely event that your Humminbird® does require repa …

Comments, Questions and Opinions: