Manualios.com

Casio IT-3000 - Win CE .NET 4.1 400 MHz Operation & User’s Manual

  • IT-3000 - Win CE .NET 4.1 400 MHz Tablet
  • maw1RvvBmk5vM
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 79

Casio IT-3000 - Win CE .NET 4.1 400 MHz Manual Online:

3.8, 2844 votes
Casio IT-3000 - Win CE .NET 4.1 400 MHz User Manual
Casio IT-3000 - Win CE .NET 4.1 400 MHz User Guide
Casio IT-3000 - Win CE .NET 4.1 400 MHz Online Manual

Text of Casio IT-3000 - Win CE .NET 4.1 400 MHz User Guide:

  • E-19 Options IT-3000 Series Required AC Adaptor for Bridge Satellite Cradle / Cradle-type Battery Charger Cradle-type Battery Charger HA-B30CHG HA-B61IO Bridge Satellite Cradle Handheld Printer Terminal System Configuration AD-S42120BE IT-3000_E_P16_32.p65 07.10.3, 5:36 PM19

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-32 Removal Procedure 1. Pull back the locking bar of the neck strap mounting hook and then release the hook from each ring as shown in the illustration. 2. Following the attachment procedure in reverse way, remove the neck strap rings from each neck strap mounting hook on the Handheld Printer Terminal and then push back the neck strap mounting hooks into each silo. Attaching the Stylus Holder The stylus holder provided can be attached to the neck strap as necessary. When attaching the stylus holder, first remove the neck strap from the Handheld Printer Terminal. In addition, remove the stylus from the stylus holder. Bracket AMounting Hook C Bracket B Attac

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-29 Important! • When replacing the battery pack, make sure you do not leave the Handheld Printer Terminal without a battery pack for more than about 10 minutes. Doing so can cause data in the memory to be deleted. • Never try to use other type of battery than the one that is specified for this product. 6. Return the battery pack cover to its original position as shown in the illustration, and then turn the battery pack cover lock switch to the “LOCK” position. IT-3000_E_P16_32.p65 07.10.3, 5:37 PM29

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-23 General Guide 25 3 4 5 6 7 8 9 10 1 2 24 11 12 13 14 15 16 17 18 23 19 20 18 21 22 IT-3000M53E/M54E2/M55E/M55U/M56E/M56U * The C-MOS Imager is only installed on the IT-3000M55E/ M55U/M56E/M56U * Magnetic Card Reader is only installed on the IT-3000M54E2/ M55E/M55U IT-3000_E_P16_32.p65 07.10.3, 5:36 PM23

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-73 Connect a bar code reader to the RS-232C interface connector (8-Pin) on the Handheld Printer Terminal. Connecting the bar code reader 1. Check that the power is off. If the power is on, always make sure to turn it off by pressing the power key. Open the cover of the RS-232C interface connector. ( ) 2. Insert the plug of the bar code reader into the connector as shown in the illustration.( ) Disconnecting bar code reader Turn off the power of the Handheld Printer Terminal. Unplug the bar code reader. 1 2 Connecting a Bar Code Reader (IT-3000M53E/IT-3000M54E2 only) 1 2 IT-3000_E_P54_77.p65 07.10.16, 15:1873

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-67 PC card compatible with the PCMIA(Type I/II) standard can be installed in the PC Card slot on the Handheld Printer Terminal. Insert a PC card according to the procedure described below. Attachment of PC Card Removal Tape to a PC Card There are some PC cards that may be difficult to remove from the PC card slot once they have been inserted. In the case of such PC cards, attach the PC card removal tape provided before inserting the PC card. Important! When inserting a CF card and so forth using the PC Card Adapter, always make sure to attach the PC card removal tape to the PC Card Ad

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-54 Back Bottom Right To p Front The optionally available Bridge Satellite Cradle (HA-B61IO) makes it possible to transfer system data and file data between the Handheld Printer Terminal and a computer using an RS-232C interface or USB interface. You can also use the Bridge Satellite Cradle to charge the battery pack installed on the Handheld Printer Terminal. General Guide Using the Bridge Satellite Cradle (HA-B61IO) IT-3000_E_P54_77.p65 07.10.3, 5:39 PM54

  • E-15 General Guide ................................................................................................... E-54 Connecting the AC Adaptor and Connecting to a Computer ............................ E-56 Configuring DIP Switch Settings ..................................................................... E-58 Connecting Multiple Bridge Satellite Cradles (HA-B61IO) ........................

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, • This Product is equipped with the Brycen B-RAPPORE Stack and My Wirefree Network Bluetooth User Interface Application, the use of which is governed by a license granted by Brycen Co., Ltd. ® • BLUETOOTH is a registered trademark owned by Bluetooth SIG, Inc. and licensed to CASIO COMPUTER CO., LTD. • Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Datalight is a registered trademark of Datalight, Inc. • FlashFX TM is a trademark of Datalight, Inc.

  • E-40 5. Loosen the two screws shown in the illustration (the screws cannot be removed). 6. Open the cover (PC card slot cover) as shown in the illustration. 7. Loosen and remove the four screws shown in the illustration. Store the removed screws in a safe place so that they do not become lost. 8. Turn the Handheld Printer Terminal back over. 9. Remove the entire roll paper holder.

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-53 Character Size: Free double-width characters Generating Method : Black/white inversion, mixed character font printing 8. Card Slot PC Card Slot: PC Card Type I/Type II (3.3 V/5.0 V specifications) * Wake on function available SD Memory Card Slot: SD Memory Card 9. Magnetic Card Reader : ISO 7811 Tracks, 1, 2, and 3 (IT-3000M54E2/M55E/M55U) 10. Power Requirements Main Power: Lithium ion battery pack (DT-9723LIC) Backup Power: Lithium battery (installed inside the terminal) Battery Life: Main battery - Approx. 12.6 hours*, * Backlight off, When the keys are pressed 20 times (30seconds) and continuous printing of 20 lines (font height 2mm Alphabet and

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-45 Using the C-MOS Imager (IT-3000M55E/IT-3000M55U/IT-3000M56E/IT-3000M56U only) 1. Turn on the Handheld Printer Terminal, position its C-MOS Imager reader port near the bar code or 2D code, and then press the Trigger Key (R or L). 2. The Handheld Printer Terminal reads the code by emitting laser and red lights. Indicator 2 (read operation indicator lamp) lights in green when the reading is successful. Bar code and stacked 2D code Reading Guide When you press the Trigger key (R or L), LEDs in the Handheld Printer Terminal emit laser and red lights. Align the laser frame with the center of the bar code or 2D code you are trying to read. Take particular ca

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-46 Warning Label • This label is a warning label for Class 2 laser products that comply with IEC60825-1+A2:2001 CAUTION • Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. • The laser light emitted by the C-MOS Imager has a maximum output of less than 1 mW and a wavelength of 650 nm. Warning! Never look directly into the laser light. • This product scans using laser light. Never look directly into the laser light or shine the laser light into the eyes. Laser light is emitted from this port IT-3000M55U/M56U IT-3000M55E/M56E Using the C-M

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-35 Adjusting Display Contrast Perform the following steps to adjust display contrast to make display colors more vivid and easier to see. • Press the “Fn” key and then press the “2” key or “3” key after confirming that “F” is displayed in the lower right corner of the screen. Pressing the “2” key adjusts for more contrast, while pressing the “3” key adjusts for less contrast. * In order to continue to make adjustments, press the “2” key or “3” key after again first pressing the “Fn” key. * Contrast settings can also be

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-6 Safety Precautions Warning • Never place the battery pack in a microwave oven or any other high-voltage device. Doing so creates the danger of battery pack heat emission, explosion, and fire. • Should the battery pack emit a strange odor or heat, change color or shape, or exhibit any other abnormal behavior, immediately stop using it. Continued use creates the danger of battery pack heat emission, explosion, and fire. • If the amount of time period the battery pack can serve becomes considerably short, stop using it. It may indicate the possibility of a malfunction in the battery pack. Continued charging the battery pack creates the danger o

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-49 Bluetooth ® Communication Bluetooth ® protocol can also be used to transfer data between two Handheld Printer Terminals. The two Handheld Printer Terminals should be no more than five meters apart (as long as there is nothing blocking the path in between). Important! Observe the following precautions to help ensure that data communication is successful. • Make sure that the Handheld Printer Terminal are located within about five meters (16 '4 1313 1313 13 ⁄⁄ ⁄⁄ ⁄ 1616 1616 16 ") of each other. Surroundings (obstacles) may require a shorter distance between the two terminals. • Make sure there is at least two meters (6' 7") between this device and o

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-75 Attaching the Splash Protect Cover to the Handheld Printer Terminal lets you use it even during inclement weather. Attach the Splash Protect Cover by following the procedure described below. 1. Press the ridged ( ) portions ( ) of the paper outlet cover while spreading apart the locks on the left and right sides ( ) to disengage them as shown in the illustration followed by opening the paper outlet cover ( ). 2. Slide the lock knobs on the left and right sides of the roll paper holde

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-42 Loading Formed Sheet Paper Enable the Auto Loading function by selecting Start, Settings, Control Panel and then “Printing Control” of Printer Settings in that order before loading the formed sheet paper. 1. Insert the formed sheet paper all the way into the printer until it stops with the side to be printed facing downward. The paper will be fed into the printer automatically and be positioned at the printing position. • If the formed sheet paper becomes jammed, open the top cover (Part A) of the Paper Holder as shown in the illustration ( ) and remove the jammed paper. Important! • Always make sure to load formed sheet paper i

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-74 Attaching the Screen Protect Cover to the Handheld Printer Terminal prevents the screen from being cracked or damaged when carrying. 1. Remove the two screws on the right side of the Handheld Printer Terminal. Store the screws in a safe place after they have been removed. 2. Fasten the Screen Protect Cover with the two screws provided with the Screen Protect Cover. 3. Close the Screen Protect Cover and fasten by pressing on the cover hook at the right side. 4. Lift up on the cover hook when opening the cover. Attaching the Screen Protect Cover I

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-72 1 2 SD memory card can be installed in the SD Memory Card slot on the Handheld Printer Terminal. Insert (or remove) an SD memory card according to the procedure described below. Inserting an SD Memory Card 1. Check that the power is off. If the power is on, always make sure to turn it off by pressing the power key. 2. Open the cover of the SD memory card slot ( ) and insert an SD memory card all the way in until the top of the SD memory card aligns with the entrance of the slot of the Handheld Printer Terminal ( ). 3. Close the cover of the SD memory card slot. Removing an SD Memory Card 1. Check that the power is off. If the power is on, always make sure

  • Casio IT-3000 - Win CE .NET 4.1 400 MHz, E-30 A flexible hand strap can be attached to the Handheld Printer Terminal. Hook A Hand Strap Hook B Attach the hand strap following the procedure described below. 1. Attach Hook B of the hand strap to the hand strap hook located on the bottom of the Handheld Printer Terminal. 2. Pull on the hand strap in the direction shown in the illustration, and then fasten Hook A onto hook ( ) on the back of the Handheld Printer Terminal. 3. Fasten the wire of Hook A by inserting into the indentation in the Handheld Printer Terminal. • Pull up on the center of the wire when unfastening. Attaching the Hand Strap 1 1 1 * The illustration shows the

  • E-69 Removing a PC Card Press the eject button on the left side of PC card slot with the stylus as shown by the arrow, and pull out the PC card while holding onto the end of the PC card removal tape. Inserting a PC Card (When Using the Paper Holder) Check the names of the parts of the Paper Holder before beginning work. 1. Check that the power is off. If the power is on, alway

Related Products and Documents (Tablet):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Cisco VS-C6509E-S720-10G Operation & user’s manual cisco/vs-c6509e-s720-10g-RI3.pdf 25 Mar 2024 446 4.95 Mb
2 Makita HR3000C Instruction manual makita/hr3000c-QK4.pdf 20 Sep 2022 20
3 Samsung SPH-D600 Operation & user’s manual samsung/sph-d600-25F.pdf 14 Feb 2024 250 10.76 Mb
4 Sony MEX-BT4100U Operating instructions manual sony/mex-bt4100u-294.pdf 26 Oct 2023 264 11.24 Mb
5 Zooper NPAD User manual, maintenance manual & log book zooper/npad-3PU.pdf 26 Dec 2022 24 1.08 Mb
6 TRENDnet TEW-740APBO Quick installation manual trendnet/tew-740apbo-H4J.pdf 06 Jan 2024 22

Similar Resources:

  • Archos

    Sense 101X

    (80 pages)
    1 ENJoining usCongratulations for the purchase of an ARCHOS device! This quick start guide helps you to start using your device properly. If you have more questions concerning the use of your device, visit us at: twitter.com/archos www.facebook.com/archosBloghttps://blog.archos.com/http://faq.archos.com …
  • Samsung

    Build PC

    (12 pages)
    3Contents 3Basic Items 4Overview 5Setting up the computer 8Using the digitizer pen (Optional) 10Using the Slate PC Dock (Optional) 11Using the Bluetooth Wireless Keyboard (Optional) 14Contents● Text NotationsIcon Notation DescriptionCautionContent included in this section includes information required about the function.NoteContent included in this …
  • Oregon Scientific

    MEEP

    (2 pages)
    Quick Start Guide How to start default contentYou can now enjoy theMEEP’s default content. If you wish to experi-ence the full power of MEEP!, you need the help of a grown-up to setup Wi-Fi access and register accounts!Main MenuSlide the power button until the light turns blue. This may take a few seconds.1111211222123Press the right wheel button.Tap on & …
  • Samsung

    GT-P3100B

    (150 pages)
    Some of the contents in this manual may differ from your device depending on the software of the device or your service provider.www.samsung.comEnglish (EU). 11/2011. Rev. 1.0To install Kies (PC Sync) Download the latest version of Kies from the 1. Samsung website (www.samsung.com/kies) and install it on your PC.Using a USB cable, connect your device to your …
  • ViewSonic

    ViewPad 10eVS14445

    (29 pages)
    лчиттничюнльтцию.глтчн.Бзвыдныwww.sotmarket.ruдбняинфмциятв,тзывы,бзыиыИнструкцияViewSonic ViewPad 10e 3G 4GB� …
  • KARBONN

    ST10w

    (15 pages)
    Karbonn ST10w 1 KARBONN ST10w User Guide With Windows 10 …

Comments, Questions and Opinions: