Cirago CDD3000 Operation & User’s Manual

Text of Cirago CDD3000 User Guide:

• Cirago CDD3000, Introduction： CDD3000 is a USB 3.0 dual-SATA 2.0 hard drive docking station. It supports simultaneous use of two 2.5” or 3.5” SATA hard disks for both data read and data write. It is also backward compatible with USB 2.0 and USB 1.1. It features One Touch Cloning, which clones your hard drive with touch of a button. One Touch Cloning copies data and system files from Source HDD to Target HDD, so if your Source HDD is bootable, so will your Target HDD. 1) Power indicator

• Note: When using E-SATA interface, the PC can only recognize one HDD in the docking station. If two HDDs are in the docking station, only Slot ‘A’ HDD will be recognized by the PC. If only one HDD is inserted to the dock, then you may use either Slot ’A’ or Slot ’B’. Function： • Complies with Gen2i/Gen2m of Serial A

• Cirago CDD3000, CLONE: Please note the below conditions before clone: - Slot ‘A’ = SOURCE HDD - Slot ‘B’ = TARGET HDD - TARGET HDD’s capacity MUST be larger than SOURCE HDD, otherwise the CLONE cannot be completed. (Same capacity is also not acceptable) - Before CLONE function starts, make sure you back up any important data in TARGET HDD; once CLONE started, all data from TARGET HDD will gone. - Once the docking station is connected to the PC via USB, One Touch Cloning will not be active. See Cloning with USB section for details. 1) One Touch Cloning a) Insert source HDD to Sl

• Cirago CDD3000, b) Once the Slot indicators are on, that means CDD3000 is ready for cloning. c) Press and hold the clone button for 3 seconds until the indicator light is on, press the button once more for Clone confirmation. Cloning process begins.

• Cirago CDD3000, d) Clone progress indicator flashes and shows the progress (25%, 50%, 75%, 100%). e) Once cloning is finished, all progress indicators will light up. f) Turn off power and remove the HDDs carefully

• 2) Cloning with USB Software Installation (Windows only) a) Please insert the CD drive and click “setup.exe”. Choose your language and click “ Next” b) Fill in the S/N # accordingly (you can find the S/N# on the cover of CD)

• Cirago CDD3000, e) Click “Done” once installation is finished Clone from Source HDD to Target HDD a) Insert Source HDD and Target HDD into the docking station and connect CDD3000 to PC via USB cable. Turn on the power, and you can find the clone icon on the right bottom of window. Double click the CLONE Icon to start the program. CLONE Icon

• f) You should find the same contents of Source HDD in Target HDD g) If your target HDD has extra space, the system will allocate it to “unallocated” area automatically, please refer to the below picture. （Windows system only allows a maximum of four primary partitions, if the original disc already exist fo

• Limited Warranty This is to certify that this Product is free of congenital defects in materials and workmanship. Cirago’s Limited warranty provides the customer 1-year free service with the following conditions: 1. Warranty service is valid only in the United States and only applies to Cirago Products. 2. If you are having tro

• Cirago CDD3000, 7. All damaged parts will become Cirago’s property. 8. Free warranty service will not be provided if: i) The Product has been explicitly or implicitly modified, tampered with, altered or repaired in any way by persons other than our technicians or approved vendors; or ii) The Product has been damaged due to misuse, negligence, accident, shipment, inserts or natural calamities; or iii) The Product has been installed, maintained or operated not in accordance with the instructions furnished by Cirago; or iv) Any damage, deterioration or malfunction is caused by power interruption or abnormal voltage input. 9. Warranty

Related Products and Documents (Docking Station):

Comparable Devices:

Similar Resources:

• Renkforce RF-4770549 (12 pages) • Wenden Sie sich an eine Fachkraft, wenn Sie Zweifel über die Arbeitsweise, die Sicherheit oder den Anschluss des Produkts haben.• Lassen Sie Wartungs-, Anpassungs- und Reparaturarbeiten ausschließlich von einem Fachmann bzw. einer Fachwerkstatt durchführen.• Sollten Sie noch Fragen haben, die in dieser Bedienungsanleitung nicht beant-wortet wer …

• iHome iDL91 (13 pages) Model iDL91Dual Charging Stereo Clock Radio with Lightning Dock and USB PortQuestions? For latest instructions, visit www.ihome.com/supportiDL91 IB_US versionSize: 178 x 178 mm (16 pages)Printing color: BlackMat’l: 90gsm book paperMay 16. 2013.6download QR code reader app and scan …

• Getac T800 (2 pages) Using the T800 Second Battery Pack Charging the Battery Pack This second battery pack is a snap-on module to provide T800 with extra battery power. To charge the battery pack, connect the AC adapter. The Battery Charge Indicator ( ) glows amber to indicate that charging is in progress. It takes approximately 3 hours to fully charge the battery pack. When …

• numskull PS4 (2 pages) 4M PREMIUM PS4® PLAY &CHARGE CABLE CONTENTS: x1 Premium Play & Charge Cable SETUP: 1. To charge your DUALSHOCK®4 wireless controller first insert the USB A jack into an available USB port on your PS4®. 2. Now insert the Micro-USB end of the 4M Premium Play & Charge Cable into your DUALSHOCK®4 wireless controller – when charging begi …

• Icy Box IB-2912MCL-C31 (20 pages) Manual IB-2912MCL-C31Manual IB-2912MCL-C31Docking and Clone Station for M.2 NVMe SSD Handbuch IB-2912MCL-C31 Docking und Clone Station für M.2 NVMe SSD Manual IB-2912MCL-C31 …

• Daxndox D1-ARIA (2 pages) SoverwendenSiedenConnectorClipDerConnectorClipermöglichtIhnenmitHilfedesLightningConnectors(mitIhremiPadgeliefertesUSBLadekabel)dasLadenIhresiPad.FüroptimaleStabilitätführenSiebittedasKabeldesLightningConnectorswieabgebildetausdemD1-Ari …

Comments, Questions and Opinions: