Manualios.com

Cisco PAP2 Installation And Troubleshooting Manual

Cisco PAP2 Manual Online:

3.15, 724 votes
Cisco PAP2 User Manual
Cisco PAP2 User Guide
Cisco PAP2 Online Manual

Text of Cisco PAP2 User Guide:

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 36 Appendix E: Warranty Information remedy provided under this Agreement fails of its essential purpose. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to You. Please contact Vonage regarding the warranty for the Product. Refer to “Appendix G: Contact Information” for Vonage contact information.

  • Phone Adapter with 2 Ports for Voice-over-IP 4 Chapter 2: Getting to Know the Phone Adapter The Front Panel The Front Panel The Phone Adapter’s LEDs are located on the front panel. PHONE 1 LED Blue. The PHONE 1 LED is solidly lit when a telephone or fax machine has a registered connection to Vonage through the PHONE 1 port. (The connection is registered if your Internet phone ser

  • Phone Adapter with 2 Ports for Voice-over-IP 15 Appendix A: Troubleshooting Common Problems and Solutions Appendix A: Troubleshooting This appendix provides solutions to problems that may occur during the installation and operation of the Phone Adapter. Read the description below to solve your problems. If you can't find an answer here, check the Vonage website at www.v

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 9 Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu Overview Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu Overview Chapter 4 explains how you can use the Interactive Voice Response Menu to configure the Phone Adapter’s network settings. You may need to change these settings depending on the specifics of your local network setup. Use the phone’s keypad to enter your commands and select choices, and the Phone Adapter will respond with voice responses. Accessing

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 27 Appendix C: Glossary Appendix C: Glossary Adapter - A device that adds network functionality to your PC. Backbone - The part of a network that connects most of the systems and networks together, and handles the most data. Bandwidth - The transmission capacity of a given device or network. Bit - A binary digit. Boot - To start a device and cause it to start executing instructions. Bridge - A device that connects different networks. Broadband - An always-on, fast Internet connection. Browser - An application program that provides a way to look at and inter

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 12 Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu Using the Interactive Voice Response Menu Set Static IP Address 111 Enter the IP address using numbers on the telephone keypad. Use the * (star) key when entering a decimal point. To set a static IP address, the DHCP feature must be disabled. If the DHCP feature is enabled, then you will hear, “Invalid Option,” if you try to set a static IP address. Check Network Mask (or Su

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 17 Appendix A: Troubleshooting Common Problems and Solutions 8. Repeat steps 5-7 until you have entered all four port ranges for the Phone Adapter. 9. Check the Enable option for the port services you want to use. 10. When you have completed the configuration, click the Save Settings button. 2. When I make a telephone call, the call doesn’t go through; instead, I hear a fast busy signal. Go through this checklist until your problem is solved: • Vonage supports 7-, 10-, and 11-digit dialing. Use 7-, 10-, or 11-digit dialing for calls within the same area code as your Vonage phone number. Use 10- or 11-digit dialing for

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP List of Figures Figure 2-1: Back Panel 3 Figure 2-2: Front Panel 4 Figure 3-1: Connect the Phone Adapter to Your Network and Telephone 5 Figure 3-2: Connect the Telephone Cable 6 Figure 3-3: Connect the Ethernet Network Cable 6 Figure 3-4: Connect the Power 6 Figure 3-5: Attaching the Phone Adapter’s Base 7 Figure 3-6: Phone Adapter Standing on Base 7 Figure 3-7: Measurement between Wall-Mount Slots 8

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 11 Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu Using the Interactive Voice Response Menu Check DHCP 100 Use this command to find out if DHCP has been enabled or disabled. If enabled, the Phone Adapter will be automatically assigned an IP address by your network router or gateway. If disabled, then the Phone Adapter will use a static IP address. Enable/Disable DHCP 101 Enter 1 to enable Enter 0 to disable Enable or disable the Phone Adapter’s DHCP feature. If your network router or gateway assigns IP addresses, then enter 1. Otherwise, enter 0. Ch

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in this Guide? 1 Chapter 2: Getting to Know the Phone Adapter 3 Back Panel Ports 3 The Front Panel 4 Chapter 3: Connecting the Phone Adapter 5 Overview 5 Instructions for Connecting the Phone Adapter 5 Placement Options 7 Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu 9 Overview 9 Accessing the Interactive Voice Response Menu 9 Using the Interactive Voice Response Menu 9 Configuring the Settings for Your Internet Phone Service 14 Appendix A: Troubleshooting 15 Common Problems and Solutio

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 22 Appendix A: Troubleshooting Common Problems and Solutions 8. Repeat steps 5-7 until you have entered all four port ranges for the Phone Adapter. 9. Check the Enable option for the port services you want to use. 10. When you have completed the configuration, click the Save Settings button. 5. The Power LED does not light up or lights up red. Go through this checklist until your problem is solved: • Unplug the power adapter from the Phone Adapter. Wait five seconds. Then plug the power adapter into the Phone Adapter again. • You may be using the wrong power adapter. Make s

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 32 Appendix C: Glossary Topology - The physical layout of a network. TX Rate - Transmission Rate. UDP (User Datagram Protocol) - A network protocol for transmitting data that does not require acknowledgement from the recipient of the data that is sent. Upgrade - To replace existing software or firmware with a newer version. Upload - To transmit a file over a network. URL (Uniform Resource Locator) - The address of a file located on the Internet. VPN (Virtual Private Network) - A security m

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2004 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders. How to Use this Guide Your guide to the Phone Adapter has been designed to make understanding networking with the Phone Adapter easier than ever. Look for

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 34 Appendix D: Specifications Dimensions 3.98" x 3.98" x 0.59" (W x H x D) (101 mm x 101 mm x 15 mm) Unit Weight 4.59 oz. (0.13 kg) Power 5 V DC, 2.0 A Certifications FCC, cUL, CE Operating Temp. 41º~113ºF (5º~45ºC) Storage Temp. -13º~185ºF (-25º~85ºC) Operating Humidity 10~90% Non-Condensing Storage Humidity 5~90% Non-Condensing

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 2 Chapter 1: Introduction What’s in this Guide? • Chapter 2: Getting to Know the Phone Adapter This chapter describes the physical features of the Phone Adapter. • Chapter 3: Connecting the Phone Adapter This chapter explains how to connect the Phone Adapter to your network and phones (or fax machines). • Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu This chapter explains how to configure the Phone Adapter’s network settings. • Appendix A: Troubleshooting This appendix describes some potential problems and solutions, as well as frequently asked questions

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 8 Chapter 3: Connecting the Phone Adapter Placement Options Wall-Mount Option The Phone Adapter has two wall-mount slots on its back panel. The distance between the two slots is 58 mm (2.28 inches). 1. Determine where you want to mount the Phone Adapter. 2. Drill two holes into the wall. Make sure the holes are 58 mm (2.28 inches) apart. 3. Insert a screw into each hole, and leave 5 mm (0.2 inches) of its head exposed. 4. Maneuver the Phone Adapter so the wall-mount slot

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 25 Appendix B: Windows Help Appendix B: Windows Help Almost all Linksys products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier. These features can be accessed through Windows Help and are described in this appendix. TCP/IP Before a computer can communicate with a network router, TCP/IP must be enabled. TCP/IP is a set of instructions, or protocol, all PCs follow to communicate over a network. This is true for wireless networks as well. Your PCs will not be able to utilize wireless networking without having TCP/IP enabled. Windows Help pro

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 28 Appendix C: Glossary Database - A collection of data that is organized so that its contents can easily be accessed, managed, and updated. DDNS (Dynamic Domain Name System) - Allows the hosting of a website, FTP server, or e-mail server with a fixed domain name (e.g., www.xyz.com) and a dynamic IP address. Default Gateway - A device that forwards Internet traffic from your local area network. DHCP (Dynamic Host Configuration Protocol) - A networking protocol that allows administrators to assign temporary IP addresses to network computers by “leasing” an IP address to a user for a li

  • Cisco PAP2, Phone Adapter with 2 Ports for Voice-over-IP 29 Appendix C: Glossary Firmware - The programming code that runs a networking device. Fragmentation -Breaking a packet into smaller units when transmitting over a network medium that cannot support the original size of the packet. FTP (File Transfer Protocol) - A protocol used to transfer files over a TCP/IP network. Full Duplex - The ability of a networking device to receive and transmit data simultaneously. Gateway - A device that interconnects networks with different, incompatible communications protocols. Half Duplex - Data transmission that can occur in two directions over a single line, but only one direction at a

  • Phone Adapter with 2 Ports for Voice-over-IP 13 Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu Using the Interactive Voice Response Menu Set Static Gateway IP Address 131 Enter the IP address using numbers on the telephone keypad. Use the * (star) key when entering a decimal point. To set a static gateway IP address, the DHCP feature must be disa

Related Products and Documents (Adapter):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Tatung TCM-2102s Specification sheet tatung/tcm-2102s-667.pdf 18 Jul 2022 2 0.29 Mb
2 Acer SL 700X Operation & user’s manual acer/sl-700x-CQ6.pdf 28 Jun 2023 26 1.62 Mb
3 Kicker CX300.4 Owner's manual kicker/cx300-4-7J1.pdf 23 May 2023 12
4 LG MS910 Features lg/ms910-291.pdf 31 Oct 2022 3
5 Toshiba C655D-S5234 Specifications toshiba/c655d-s5234-787.pdf 21 Sep 2023 4
6 Haier G-2 Instruction manual haier/g-2-93Q.pdf 11 Jun 2023 8 0.08 Mb

Similar Resources:

  • Tektronix

    TPA-BNC

    (2 pages)
    Safety SummaryTo avoid potential hazards, use this product only as specified.To avoid fire or personal injuryConnect and disconnect properly. Connect the TPA-BNC Adapter to the host instrument before connecting the device to the circuit-under-test. Disconnect the device input and ground from the circuit under test before disconnecting the device from the ada …
  • ZyXEL Communications

    DMA-1100P

    (6 pages)
    Quick Start GuideHomePlug DigitalMedia Streamerdma1100pCopyright © 2008 ZyXEL Communications Corp. All rights reserved. ZyXEL logo is a registered trademark ofZyXEL Communications Corp. All other brands, product names or trademarks mentioned are the property of their respective owners. All specifications are subject to change without notice.Technical &am …
  • Lindy

    43242

    (2 pages)
    USB 3.1 Type C Audio/Video Adapter User Manual English Benutzerhandbuch Deutsch Manuel Utilisateur Français Manuale Italiano Hersteller / Manufacturer (EU): LINDY-Elektronik GmbH LINDY Electronics Ltd. Markircher Str. 20 Sadler Forster Way 68229 Mannheim Stockton-on-Tees, TS17 9JY Germany United Kingdom Email: [email protected]
  • Basalte

    092-01

    (2 pages)
    Installation Manual© 2015basalte v1.0Flush mount for SentidoDescriptionThe flush mount for Sentido (092-01) is an adapter for in-wall flush installation of a Sentido keypad. Enzo finishes are not compatible. The flush mount for Sentido securely mounts the keypad while allowing easy access, insertion and exertion. The adapter is supplied unpainted. The flus …
  • BENDIXKing

    KA 310

    (56 pages)
    © Honeywell International Inc. Do not copy without express permission of Honeywell. Honeywell International, Inc. 9201-B San Mateo Blvd N.E. Albuquerque, New Mexico 87113 U.S.A. Telephone: 855-250-7027 (Toll Free U.S.A./Canada) Telephone: 602-365-7027 (International Direct) KA 310 AUTOPILOT ADAPTER STC INSTALLATION MANUAL Document P/N 89000004-200 R …
  • HP

    ProLiant DL360

    (60 pages)
    The HP ProLiant DL360 G7 combines performance, intelligent power and cooling management with IT management tools andessential fault tolerance, all optimized for space constrained installations. A 1U server with the improved performance of the latestIntel 5600 series processors, Unique HP Thermal Logic Technologies that provide leadership in energy efficienci …

Comments, Questions and Opinions: