Manualios.com

Cisco 5505 - ASA Firewall Edition Bundle Administrator's Manual

  • 5505 - ASA Firewall Edition Bundle Chassis
  • maeCtYKD1wojo
  • Administrator's Manual
  • PDF / Adobe Acrobat Reader
  • 118

Cisco 5505 - ASA Firewall Edition Bundle Manual Online:

3.65, 1291 votes
Cisco 5505 - ASA Firewall Edition Bundle User Manual
Cisco 5505 - ASA Firewall Edition Bundle User Guide
Cisco 5505 - ASA Firewall Edition Bundle Online Manual

Text of Cisco 5505 - ASA Firewall Edition Bundle User Guide:

  • Cisco 5505 - ASA Firewall Edition Bundle, 5-10 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 5 Configuring AnyConnect Features Using ASDM Configuring, Enabling, and Using Other AnyConnect Features Changing Compression Globally To change the global compression settings, use the compression svc command from global configuration mode: compression svc no c ompression svc To remove the command from the configuration, use the no fo rm of the command. In the following example, compression is disabled for all SSL VPN connections globally: hostname(config)# no compression svc Changing Compression

  • Cisco 5505 - ASA Firewall Edition Bundle, 5-14 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 5 Configuring AnyConnect Features Using ASDM Configuring, Enabling, and Using Other AnyConnect Features Enabling and Adjusting Dead Peer Detection Dead Peer Detection (DPD) ensures that the security appliance (gateway) or the client can quickly detect a condition where the peer is not responding, and the connection has failed. Note When using the AnyConnect client with DTLS on security appliance, Dead Peer Detection must be enabled in the group policy on the security appliance to allow the AnyConnect client to fall back to TLS, if necess

  • Cisco 5505 - ASA Firewall Edition Bundle, 2-5 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 2 Common AnyConnect VPN Client Installation and Configuration Procedures Before You Install the AnyConnect Client 3. The user connects successfully to security appliance #1. 4. The user disconnects from security appliance #1. 5. The user reconnects to badly configured security appliance #1. 6. The user does not see the pop-up dialog box, because the certificate is stored in the preferences file. The user connects successfully to security appliance #1. 7. The user disconnects from security

  • 5-6 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 5 Configuring AnyConnect Features Using ASDM Configuring, Enabling, and Using Other AnyConnect Features Figure 5-5 Optional Client Module to Download In the case of Start Before Logon, you must also enable the feature in the XML profile. For a list of values to enter for each AnyConnect cl ient fea

  • Cisco 5505 - ASA Firewall Edition Bundle, 2-6 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 2 Common AnyConnect VPN Client Installation and Configuration Procedures Before You Install the AnyConnect Client Recommendation: Administrators should import the root certificate that was used to sign that server certificate (for example, their own certificate authority or cacert.org) into every client machine out of band via E-mail, website, floppy disk, and so on. • Scenario B: The user gets the server certificate for the security appliance from the certificate authority that sits on the security appliance. The user sees the Secur

  • Cisco 5505 - ASA Firewall Edition Bundle, 6-3 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 6 Configuring AnyConnect Features Using CLI Enabling IPv6 VPN Access svc ask enable default webvpn timeout value prompts the remote user to download the client or go to the WebVPN portal page, and waits the duration of value before taking the default action—displaying the WebVPN portal page. Figure 6-1 sho ws the prompt displayed to remote users when either default svc timeout value or default webvpn timeout value is conf igured: Figure 6-1 Prompt Displayed to Remote Users for SSL VPN Client Download The following example configures the s

  • Cisco 5505 - ASA Firewall Edition Bundle, THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT S HIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTA

  • 3-9 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 3 Installing the AnyConnect Client and Configuring the Security Appliance with ASDM Step 9 Configure SSL VPN attributes for a user or group. To display SSL VPN features for groups, In the navigation pane of the Internal Group Policy dialog, choose Advanced > SSL VPN Client. The SSL VPN C

  • Cisco 5505 - ASA Firewall Edition Bundle, A-1 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 APPENDIX A Sample AnyConnect Profile and XML Schema This appendix contains a sample AnyConnect profile and a sample AnyConnect profile schema. Both of these are delivered with the client and are present in a client installation in the same directory. The profile defines the attributes configured for a particular user. The schema defines the profile format that is allowed. The schema is suitable for use as a validation mechanism. • Sample AnyConnect Profile, page A-1 • Sample AnyConnect Profil

  • Cisco 5505 - ASA Firewall Edition Bundle, Index IN-2 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 configuring with CLI 2 features, AnyConnect 1 Firefox, certificates 7 G getting the necessary files 7 GUI, customizing 1 I installation 7, 1 automatic 2 new /clean Windows 2000 installation issue 3 preparation 2 installing AnyConnect Mac OSX 9 Windows PC 8 interface customizing 1 user 2 Internet Explorer adding security appliance to trusted sites 3 adding security appliance to trusted sites using AD 1 IPv6 VPN access 2 access, enabling with ASDM 5 access, enabling with CLI 3 K keepalive messages 11, 8 configuring with ASDM 10 Ke

  • 3-2 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 3 Installing the AnyConnect Client and Configuring the Security Appliance with ASDM Figure 3-1 SSL VPN Client Panel To add an AnyConnect client image, Click Add in the SSL VPN Client Images area. The Add SSL VPN Client Image dialog appears (Figure 3-2). Figure 3-2 Add SSL VPN Client Image Dialog

  • Cisco 5505 - ASA Firewall Edition Bundle, 4-2 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 4 Installing the AnyConnect Client on a Security Appliance Using CLI Enabling AnyConnect Client SSL VPN Connections Using CLI Note The security appliance expands SSL VPN client and the Cisco Secure Desktop images in cache memory. If you receive the error message ERROR: Unable to load SVC image - increase disk space via the 'cache-fs' command, use the cache-fs limit command to adjust the size of cache memory: Step 3 Check the status of the clients using the show webvpn

  • Cisco 5505 - ASA Firewall Edition Bundle, B-1 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 APPENDIX B Using Microsoft Active Directory to Add the Security Appliance to the List of Internet Explorer Trusted Sites for Domain Users An Active Directory Domain Administrator can push a group policy to domain users that adds the security appliance to the list of trusted sites in Internet Explorer. Note that this differs from the procedure to add the security appliance to the list of trusted sites by individual users, described in Adding a Security Appliance to the List of Trusted Site

  • Cisco 5505 - ASA Firewall Edition Bundle, 2-3 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 2 Common AnyConnect VPN Client Installation and Configuration Procedures Before You Install the AnyConnect Client The procedure varies by browser. See the procedures that follow this section. – Make sure the Common Name (CN) in security appliance certificates matches the name clients use to connect to it. By default, the security appliance certificate CN field is its IP address. If clients use a DNS name, change the CN field on the security appliance certific

  • Cisco 5505 - ASA Firewall Edition Bundle, 8-3 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 8 Customizing and Localizing the AnyConnect Client Customizing the End-user Experience Language Translation (Localization) for User Messages Localization provides a way of implementing translation for user messages that appear on the client user interface. The security appliance provides language translation for the portal and screens displayed to users that initiate browser-based, Clientless SSL VPN connections, as well as the interface displayed to Cisco AnyConnect VPN Client users. This

  • Cisco 5505 - ASA Firewall Edition Bundle, 6-5 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 6 Configuring AnyConnect Features Using CLI Configuring, Enabling, and Using Other AnyConnect Features Configuring, Enabling, and Using Other AnyConnect Features The following sections describe how to configure other AnyConnect features. Some features, such as Secure Desktop and dynamic access policies, do not require that you specifically configure the AnyConnect client to interact with that feature. Rather, all configuration for those features occurs on the security appliance or within the software package itself. Configuring Cert

  • 10 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 About This Guide Obtaining Documentation, Obtaining Support, and Security Guidelines Obtaining Documentation, Obtaining Support, and Security Guidelines For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco do

  • Cisco 5505 - ASA Firewall Edition Bundle, 1-4 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 1 Introduction Remote User Interface The Security Alert dialog box appears only on the first connection attempt to a given security appliance. After the connection is successfully established, the “thumbprint” of the server certificate is saved in the preferences file, so the user is not prompted on subsequent connections to the same security appliance. If the user switches to a different security appliance an d back, the

  • Cisco 5505 - ASA Firewall Edition Bundle, 8-5 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 8 Customizing and Localizing the AnyConnect Client Customizing the End-user Experience Figure 8-1 Language Localization Pane Fields • Add—Launches the Add Localization Entry dialog where you can select a localization template to add and you can edit the contents of the template. • Edit—Launches the Edit Localization Entry dialog for the selected language in the table, and allows you to edit the previously-imported language localization table. • Delete—Deletes a selected language localization table. • Import—Launches th

  • Cisco 5505 - ASA Firewall Edition Bundle, 7-12 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 7 Configuring and Using AnyConnect Client Operating Modes and User Profiles Configuring Profile Attributes You must also specify on the security appliance that you want to allow SBL (or any other modules for additional features). See the description in the section Enabling Modules for Additional AnyConnect Features, page 5-5 (ASDM) or Enabling Modules for Additional AnyConnect Features, page 6-4 (CLI) for a description of how to do this. Configuring the ServerList Attribute One of the main uses of the profile is to provide a means of supplying a user of the client w

  • Cisco 5505 - ASA Firewall Edition Bundle, 5-8 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 5 Configuring AnyConnect Features Using ASDM Configuring, Enabling, and Using Other AnyConnect Features Figure 5-7 SSL VPN Connection Profiles Dialog Box In the Access Interfaces area, select the check box Enable Cisco AnyConnect VPN Client or legacy SSL VPN Client access on the interfaces selected in the table below. Then select the check boxes for the interfaces on which you want to enable access. Specify the Access Port. The default access port is 443. If you want to assign a

  • Cisco 5505 - ASA Firewall Edition Bundle, CHAPTER 7-1 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 7 Configuring and Using AnyConnect Client Operating Modes and User Profiles AnyConnect Client Operating Modes The user can use the AnyConnect Client in the following modes: • Standalone mode—Lets the user establish a Cisco AnyConnect VPN client connection without the need to use a web browser. If you have permanently installed the AnyConnect client on the user’s PC, the user can run in standalone mode. In standalone mode, a user opens the AnyConnect client just like any other application and enters the username and password credentials i

  • Cisco 5505 - ASA Firewall Edition Bundle, B-2 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Appendix B Using Microsoft Active Directory to Add the Security Appliance to the List of Internet Explorer Trusted Step 14 Type the URL for the Security Appliance that you want to add to the list of Trusted Sites and click Add. The format can contain a hostname (https://vpn.mycomp any.com) or IP address (https://192.168.1.100). It can be an exact match (https://vpn.mycompany.com) or a wildcard (https://*.mycompany.com). Step 15 Click Close (or OK and OK). Step 16 Click Close (or OK until all dialog boxes are closed, a

  • Cisco 5505 - ASA Firewall Edition Bundle, A-10 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Appendix A Sample AnyConnect Profile and XML Schema Sample AnyConnect Profile Schema <xs:enumeration value="O"> <xs:annotation> <xs:documentation>Subject Company</ xs:documentation> </xs:annotation> </xs:enumeration> <xs:enumeration value="OU"> <xs:annotation> <xs:documentation>Subject Departmen t</xs:documentation> </xs:annotation> </xs:enumeration> <xs:enumeration value="T"> <xs:annotation> <xs:documentation>Subject Title</xs :documentation> </xs:annotation> <

  • 1-5 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 1 Introduction Remote User Interface Figure 1-3 shows the Statistics tab, including current connection information. Figure 1-3 Cisco AnyConnect VPN Client User Interface, Statistics Tab Clicking the Details tab shows Statistics Details window (Figure 1-4). The Statistics tab in the Sta

  • Cisco 5505 - ASA Firewall Edition Bundle, 7-10 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 7 Configuring and Using AnyConnect Client Operating Modes and User Profiles Configuring Profile Attributes Figure 7-5 Add or Edit User Account Dialog Box (Username) Step 7 Deselect Inherit and select a Client Profile to Download from the drop-down list or click New to specify a new client profile. If you click New, the Add SSL VPN Client Profile dialog box (Figure 7-2 on page 7-7) appears; follow the procedures th at pertain to that figure. Step 8 When you have finished with the configuration, click OK. Configuring Profile Attributes You configure profile attributes by

  • Cisco 5505 - ASA Firewall Edition Bundle, 5-16 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 5 Configuring AnyConnect Features Using ASDM Configuring, Enabling, and Using Other AnyConnect Features Cisco Secure Desktop for Windows 2000 and Windows XP. There is no specific configuration of AnyConnect required to use Secure Desktop. For detailed information about configuring Cisco Secure Desktop, see the Cisco Secure Desktop Configuration Guide for Cisco ASA 5500 Series Administrators (Software Release 3.2).

  • 8-2 Cisco AnyConnect VPN Client Administrator Guide OL-12950-012 Chapter 8 Customizing and Localizing the AnyConnect Client Customizing the End-user Experience For Linux All files for Linux are located in /opt/cisco/vpn/pixmaps/. Table 8-2 lists the files that you can replace and the client GUI area affected. For Mac OS X All files for OS X are located in

Related Products and Documents (Chassis):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Xerox Phaser 8200 Networking setup manual xerox/phaser-8200-SY8.pdf 16 Feb 2024 47 0.86 Mb
2 Samsung DVD-V3500 Instruction manual samsung/dvd-v3500-152.pdf 24 Jul 2022 35 2.55 Mb
3 Imation S-Class Specification sheet imation/s-class-D3Z.pdf 02 Aug 2023 1
4 RTS XCP-48-RJ45 Technical manual rts/xcp-48-rj45-2K4.pdf 15 Dec 2023 6 0.08 Mb
5 Paxar 9825 Quick reference paxar/9825-UW1.pdf 19 Dec 2022 12 0.8 Mb
6 AEG Electrolux ER8137I Installation and instruction manual aeg-electrolux/er8137i-1J7.pdf 27 Aug 2022 15 0.21 Mb

Similar Resources:

  • Allied Telesis

    AT-8400 Series

    (2 pages)
    Electrical Safety and Emission StatementStandards: This product when meets the following standards when installed in compliant host equipment:.Emission FCC Class A, EN55022 Class A, VCCI Class A, C-TICKWARNING: In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Immunity EN550 …
  • EtherWAN

    EMC400

    (2 pages)
    EMC400 www.etherwan.com 70G-EMC400XQ1 1 This quick start guide describes how to install and use the 4-Slot Media Converter Chassis. The system introduced here is capable of housing up to four media converters, each of which offers one channel media conversion solution. Physical Description The Terminal …
  • Supermicro

    SC743 Series

    (104 pages)
    SC743 Chassis SeriesSC743TQ-865B-SQ SC743TQ-865(B)SC743TQ-R760(B) SC743S2-R760(B)SC743S1-R760(B) SC743T-R760(B)SC743i-R760(B) SC743i-665BSC743T-665B SC743i-500BSC743T-500B SC743i-465BUSER’S MANUAL1.2d SUPER® …
  • National Instruments

    PXIe-1092

    (4 pages)
    INSTALLATION GUIDEPXIe-1092 Fan ReplacementThis document describes how to remove and install the fan assemblies in a PXIe-1092 chassis.Caution Disconnect all power cables and wait at least 30 seconds prior to replacing fan assemblies.Replacing the PXI Module Fan AssemblyBefore attempting to replace the rear module fan assembly, verify that there is adequate …
  • Digiop

    790

    (4 pages)
    1Congratulations on your new DIGIOP® Video and Data Management SystemThis guide provides setup instructions for your server hardware. For more information, contact DIGIOP® Support at 877.972.2522 Toll Free • [email protected] • www.digiop.com www.digiop.comDIGIOP® 790 Chassis for EH21, EI21 Series SystemsDO_Opt790-H2_CoQ 5/18/12DIGIOP® 790 Chassis …
  • Cisco

    CRS-1 - Carrier Routing System Router

    (250 pages)
    Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706 USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 527-0883Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration GuideCisco IOS XR Software Release 4.0Text Part Number: OL-13669-03 …

Comments, Questions and Opinions: