Manualios.com

Cisco OL-10426-01 Operation & User’s Manual

Cisco OL-10426-01 Manual Online:

4.8, 1607 votes
Cisco OL-10426-01 User Manual
Cisco OL-10426-01 User Guide
Cisco OL-10426-01 Online Manual

Text of Cisco OL-10426-01 User Guide:

  • 6-7 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 6 NMT Reports Using the Map Tool Figure 6-1 Example of Network Topology Map Showing Threshold Dialog Box Creating a Graphical Display To create a graphical display of a new configuration, perform the following steps: Step 1 Select Map from the Display menu and drag the Map window to a suitable location on your screen. I

  • Cisco OL-10426-01, 4-10 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 4 Configuration Tables and Fields Link Special Cases Link Special Cases This section describes link table configuration for the following special cases: • ATM Trunks • Virtual Trunks IMATM Trunks An IMATM trunk is an ATM link of one to eight DS1 lines. Each IMATM trunk card uses a slot of an AXIS shelf, and is connected to the BPX switch by means of a T3/E3 port on a BNI card. The trunk can be configured so it fails only if more than n DS1 lines fail. The NMT does not model IMATM trunk resiliency during failure analysis. AW 504

  • CHAPTER 3-1 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 3 Using the NMT This chapter provides instructions for using the NMT interface, presents an overview of the modeling process, and lists NMT commands that update or extract information from NMT configuration files. This chapter contains the following sections: • NMT Startup • NMT Menu Bar •

  • Cisco OL-10426-01, 6-6 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 6 NMT Reports Using the Map Tool Note The Access, Domains and Help menus, and the Configure option in the Utility menu, are not enabled. To enlarge a region of the map, hold down the left mouse button and select the region of the map you want to enlarge. To move a map, hold down the middle mouse button and drag the map within the window. To reduce an enlarged map, click one or more times on the right mouse button with your cursor in the map window. To return a map to its default size, reselect the map from the Map menu. The map tool uses color coding to help you recognize important aspects of your net

  • Cisco OL-10426-01, 3-10 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 3 Using the NMT Keyboard Commands The NMT has many keyboard commands to help you create and revise configuration tables and reports. Table 3-1 lists the Sun workstation key assignments used for editing data in the NMT. Table 3-1 Sun Key Assignments Key Function Description F1 Field help Text description of the current field. F2 Window help Displays a list of key definitions for data entry and editing. F3 Copy line Copies the current line. The Repeat Line command then can be used to repeat

  • Cisco OL-10426-01, CHAPTER 1-1 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 1 Overview of the WAN Modeling Tools This chapter provides an overview of the applications that make up the Cisco WAN Modeling Tools, and of the Cisco products they support. Cisco WAN Modeling Tools Overview Cisco WAN Modeling Tools includes the following tools: • The Network Modeling Tool (NMT) • The Configuration Extraction Tool (CET) • The Third-Party Interface (TPI) • The Spread Sheet Interface (SSI) The NMT is the primary application of the Cisco WAN Modeling Tools. NMT verifies the provisioning and predicts the routing behavior of the network. NMT supports the following Cisco MSSBU ATM pla

  • Cisco OL-10426-01, 9-3 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 9 Configuration Extraction Tool Using the CET Step 4 This step is optional. If manual corrections are required on the output CNF file, you can make them once, and then automatically make them again with the 'adj2nmt' command. The command only updates fields that are missing from CWM or are not that reliable. The site names, and slot port information is used to match links and connections. Messages are generated for every change. adj2nmt <in-file> <reference-file> <out-file> {[options]} in-file is the

  • Cisco OL-10426-01, 4-4 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 4 Configuration Tables and Fields Sites Table IGX Y E Type of feeder node. Y—feeder nodes should be IGX. N—feeder nodes should be IPX. This field applies only if NMT needs to add a feeder node. IGX TF N E Tiered Feeder Flag. Y- for feeder; N- for router. This field applies only to added feeder nodes. TF BC T1 E/H Back card. Feeder link back card. This field applies only to added feeder nodes. BC FC NTM E/H Front card. Feeder l

  • Cisco OL-10426-01, xi Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Preface Documentation Feedback Cisco.com You can access the most current Cisco documentation at this URL: http://www.cisco.com/univercd/home/home.htm You can access the Cisco website at this URL: http://www.cisco.com You can access international Cisco websites at this URL: http://www.cisco.com/public/countries_languages.shtml Documentation DVD Cisco documentation and additional literature are available in a Documentation DVD package, which may have shipped with your product. The Documentation DVD is updated regularly and may

  • Cisco OL-10426-01, 4-39 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 4 Configuration Tables and Fields FastPAD Table 4-22 FastPAD Configuration Topic Required Settings Comments Setting Switch Software Release Model Settings table Make sure that the value of Switch Software Release is set to the release that is to be modeled. If that value is one that defaults to FastPAD (817 to 824, or 840 to 849), NMT will design FastPADs for any non-voice feeder connections. All other values default to MC3810 fo

  • 1-2 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 1 Overview of the WAN Modeling Tools Functionality of the NMT Figure 1-1 shows the relationship between the applications that make up the Cisco WAN Modeling Tools. Figure 1-1 Relationship between the Cisco WAN Modeling Tools Functionality of the NMT The NMT is a menu driven application t

  • Cisco OL-10426-01, 7-2 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 7 NMT Utilities Command Line onesite cnffile1 cnffile2 site Specify one site, and extract a .cnf file with only connections and links that belong to that site. Useful for analyzing a subsection of a network. adj2nmt <cnfn> <cnfref> <cnfout> Automates the changes made in the <cnfref> file to the <cnfin> file, and writes the results to the <cnfout> file. Designed to help the user modify a cet extraction regarding data not in the Cisco Strataview Plus databa

  • 4-22 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 4 Configuration Tables and Fields Bursty Table Current_Ro ute O The current route, from CET extractions. Route is stored in 19 fields... CR_SITE2, CR_SITE3, CR_SITE4, ... CR_SITE20 Not available until Release 7.2. Specific Trunk not available until Release 8.1. Current route not available for SV+

  • Cisco OL-10426-01, 4-38 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 4 Configuration Tables and Fields FastPAD FastPAD A FastPAD connection is a connection where at least one end terminates on a FastPAD. FastPADs always connect to the network on a Frame Relay composite link to an FTM or FTC card. FastPAD enables you to concentrate voice and data connection types as a Frame Relay connection joined to an FTC or FRM card. NMT designs FastPADs automatically when FastPAD connections are added to the Bursty Traffic, Data Traffic, or Voice Traffic table and the model is based on switch software release versions less than 8.2.5, or 8.

  • Cisco OL-10426-01, 2-4 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 2 Installing the Cisco WAN Modeling Tools Installing the NMT The NMT files are linked or copied to the project_name directory. This links NMT and all the plug-ins (including TPI, SSI, and CET). To link in NMT without the plug-ins, enter the following command: $NMTHOME/nmtlink -nmt Note Cisco recommends that you do not link NMT without the plug-ins. Note NMTcreates a directory under your home path called tmp. If you want NMT to use a different directory than tmp for scratch work, you can specify it with the full path by using the envir

  • Cisco OL-10426-01, 9-10 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 9 Configuration Extraction Tool Remote CET Extracts Troubleshooting Symptom A command returns Informix error 23101: Unable to load locale categories. Probable Causes The INFORMIXDIR environment variable is not set correctly Solution Either issue the command, unsetenv INFORMIXDIR, or the command, setenv INFORMIXDIR /usr/users/informix. Symptom A command returns Informix error 930: Cannot connect to database server < remotehostname > Probable Causes Either Informix is not installed on the remote host, or the INFORMIXSERVER environment variable has been set incorrectly. Solution If Infor

  • Cisco OL-10426-01, xiii Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Preface Obtaining Technical Assistance Obtaining Technical Assistance For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, Cisco Technical Support provides 24-hour-a-day, award-winning technical assistance. The Cisco Technical Support Website on Cisco.com features extensive online support resources. In addition, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not hold a valid Cisco service

  • Cisco OL-10426-01, 3-2 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 3 Using the NMT NMT Menu Bar Figure 3-1 NMT Main Window NMT Menu Bar The menus in the NMT main window contain selections for inputting data that describes the existing or proposed network. These menus also provide selections for generating optimized configurations and many different types of reports. (See Figure 3-2.) The menus are as follows: • File—Contains choices for opening, closing, deleting, and saving your file. It also provides options for importing and exporting files to other formats,

  • Cisco OL-10426-01, iii Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 CONTENTS Preface ix Related CWM and Switch Documentation ix Obtaining Documentation x Cisco.com xi Documentation DVD xi Ordering Documentation xi Documentation Feedback xi Cisco Product Security Overview xii Reporting Security Problems in Cisco Products xii Obtaining Technical Assistance xiii Cisco Technical Support Website xiii Submitting a Service Request xiii Definitions of Service Request Severity xiv Obtaining Additional Publications and Inf

  • 2-3 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 2 Installing the Cisco WAN Modeling Tools Installing the NMT Step 4 If you are installing from a cd on a Solaris platform, perform the following steps: a. Enter the following command: volcheck b. Enter the following command: Note cp /cdrom/nmt151/install/151.tar.Z If this step fails because the file is not

  • Cisco OL-10426-01, 8-6 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map Zooming the Map Figure 8-7 Link Display for Logical Links Zooming the Map To zoom in on a region of the map, follow these steps: Step 1 Move the cursor to a blank spot on the map above and to the left of the area you wish to enlarge. Step 2 Hold down the left mouse button while dragging the cursor down and to the right. A dotted box appears on the screen. Step 3 Continue moving the cursor until the dotted box surrounds the area you wish to enlarge. Step 4 Release the left mou

  • Cisco OL-10426-01, 4-31 Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Chapter 4 Configuration Tables and Fields Model Options Model Options Selecting Model options from the Config<Global menu allows you to specify the model parameter settings listed in Table 4-17. Table 4-18 Execute Menu Model Parameter Settings Setting Defaults Description Optimize LDI Ports YY —NMT tries to optimize the cost of the LDP cards by using lower cost LDP-4 cards instead of LDP-8 cards. If no, NMT only uses LDP-8 cards. You ca

  • Cisco OL-10426-01, xv Cisco WAN Modeling Tools Guide OL-10426-01, Rev. A0 Preface Obtaining Additional Publications and Information • World-class networking training is available from Cisco. You can view current offerings at this URL: http://www.cisco.com/en/US/learning/index.html

Related Products and Documents (Network Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Philips AZ 6810 Owner's manual philips/az-6810-321.pdf 12 Oct 2023 20 0.65 Mb
2 LEXIBOOK LCG500 Instruction manual lexibook/lcg500-35X.pdf 04 Aug 2023 46
3 Secura Key RK-HHP Operation & user’s manual secura-key/rk-hhp-7GI.pdf 07 Apr 2023 1
4 Honda XL125V Owner's manual honda/xl125v-25S.pdf 06 Aug 2023 57
5 Sony CDXGT610U Service manual sony/cdxgt610u-8F5.pdf 23 Aug 2023 48
6 Eminent EM6050 Manual  eminent/em6050-548.pdf 10 Jan 2024 24

Similar Resources:

  • Buffalo

    LPV3-U2

    (24 pages)
    Unpacking and SetupThis section provides unpacking and setup information for the USB Print Server.UnpackingOpen the shipping carton of the USB Printer Server and carefully unpack its contents. The carton should contain the following items: Main unit (LPV3-U2) 1 AC adapter 1 Power cord 1 USB A-to-B cable 1 Ethernet cable 1 …
  • Toshiba

    USB001Z

    (8 pages)
    E6581282④ 1 USB-シリアル通信変換ユニット USB001Z 取扱説明書 このたびは、弊社産業用インバータ用オプション“USB通信ユニット(USB001Z)”をお買い上げいただきま …
  • Airlink101

    AWLH3025

    (4 pages)
    Ver. 1AQuick Installation GuidePackage Content:• 802.11g PCI Adapter• Driver & Utility CD• Quick Installation Guide1Model # AWLH3025Step 1 Insert the PCI adapter into an available PCI slot and turn on yourcomputer.Step 3 Select Install Utility from the setup menu.Step 4 When the welcome screen appears, click Next.Section 1Install Utility SoftwareSt …
  • Panasonic

    MA2S1010G

    (4 pages)
    1Publication date: October 2007 SKF00074AEDSwitching DiodesThis product complies with the RoHS Directive (EU 2002/95/EC).MA2S1010GSilicon epitaxial planar typeFor switching circuits■ Features• High breakdown voltage: VR = 250 V• Small terminal capacitance Ct• Suitable for high-density mounting■ Absolute Maximum Ratings Ta = 25°CParameter Symbol R …
  • Cisco

    ASR 9000 Series

    (188 pages)
    Cisco Systems, Inc. www.cisco.comCisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco website at www.cisco.com/go/offices.Cisco ASR 9000 Series Aggregation Services Router Getting Started GuideCisco IOS XR Software Release 4.3.xText Part Number: OL-28417-02 …
  • Fortinet

    FortiGate FortiGate-5001SX

    (36 pages)
    www.fortinet.comFortiGate-5001SX Security System Guide01-30000-0380-20070201FortiGate-5001SXSecurity System GuidePWRSTA IPMCONSOLEUSB1 2 3 4 5 6 7 8ACCA detailed guide to the features and capabilities FortiGate-5001SX Security System. This FortiGate-5001SX Security System Guide describes FortiGate-5001SX hardware features, how to install the FortiGate-5001SX …

Comments, Questions and Opinions: