Cisco Wide Area Application Engine 612 Hardware Installation Manual

Text of Cisco Wide Area Application Engine 612 User Guide:

• Cisco Wide Area Application Engine 612, Appendix A Technical Specifications Adapter Specifications A-4 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Adapter Specifications Table A-2 describes the Fibre Channel adapter specifications. Ta b l e A-2 Fibre Channel Adapter Specifications Fibre Channel adapter • Bus type: Fiber-optic media (shortwave 50-micron) • Bus transfer rate: 2 gigabits per second (Gbps) maximum at half duplex and 4 Gbps at full duplex • Protocols: Supports FCP 1 -SCSI

• Cisco Wide Area Application Engine 612, vii Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Preface This preface describes the purpose of the Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide, who should read it, how it is organized, and its document conventions. This preface contains the following sections: • Purpose, page vii • Audience, page viii • Organization, page viii • Conventions, page ix • Related Documentation, page xi • Obtaining Documentation, page xiii • Document

• Cisco Wide Area Application Engine 612, Chapter 1 Introducing the Cisco Wide Area Application Engine Hardware Features 1-8 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Figure 1-5 Front Panel LEDs 151923 5 3 21 4 1 Power on 2 Hard disk drive activity 3 System locator (not supported on Content Engine models) 4 System error 5 CD-ROM drive activity Ta b l e 1-2 Front Panel LEDs LED Color State Description Power Green On Power is flowing to the device. Flashing The device is in standby

• Cisco Wide Area Application Engine 612, 3-9 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Chapter 3 Installing the Cisco Wide Area Application Engine Installing the Cisco Wide Area Application Engine Figure 3-7 Inserting the Chassis onto the Slide Rails 134406 2 1 1 Captive thumbscrews 2 Shipping brackets Step 7 To remove the shipping bracket, press on the release tab (labeled 1 in Figure 3-8) as indicated on the shipping bracket, and remove the shipping bracket from the slide rail. Repeat this s

• Cisco Wide Area Application Engine 612, Chapter 4 Installing Hardware Options Removing the Cover and Bezel 4-2 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Step 3 Press the cover release button. (See Figure 4-1.) Figure 4-1 Removing the Cover 151926 Cisco WAE 500 Series 1 1 Cover release button Step 4 While holding the cover release button down with your thumb, lift the opposite front corner of chassis slightly with your other hand, and using your free thumb, slide the cover back approximately 0.5 inches (1.27 cm); then lift it up and off the device. Caution For proper cooling and a

• Cisco Wide Area Application Engine 612, Preface Obtaining Technical Assistance xvi Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Reporting Security Problems in Cisco Products Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you might have identified a vulnerability in a Cisco product, contact PSIRT: • Emergencies — [email protected] An emergency is either a condition in which a system is under active attack or a condition for which a sev

• Cisco Wide Area Application Engine 612, Chapter 1 Introducing the Cisco Wide Area Application Engine Hardware Features 1-6 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 To deploy Cisco Content Engines with Cisco ACNS software within your existing network, your network must support Cisco IOS software and the Web Cache Communication Protocol (WCCP). WCCP transparently redirects HTTP requests to a Content Engine, and the Content Engine responds to those requests. WAFS Software Description With WAFS software installed, the WAE appliance functions as a Fil

• 4-11 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Chapter 4 Installing Hardware Options Working with Hard Disk Drives Note Figure 4-6 shows that disk00 is being inserted into the left drive bay in the WAE-512. Step 8 If you have other options to install, do so now; otherwise, go to the “Completing the Installa

• Cisco Wide Area Application Engine 612, 2-1 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 CHAPTER 2 Preparing to Install the Cisco Wide Area Application Engine This chapter contains important safety information you should know before working with the Wide Area Application Engine (WAE). Use the guidelines in this chapter to ensure your own personal safety and to help protect your device from potential damage. This chapter contains the following sections: • Safety Warnings, page 2-1 • Safety Guidelines, page 2-4 Note Read the Regulatory Compliance and Safety Information for the Cisco Content Networki

• Cisco Wide Area Application Engine 612, Index IN-6 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 connectors (figure) 1-13 description 1-11 W WAAS software description 1-4 WAE back panel 1-10 front panel 1-7 installing in a 2-post rack 3-3 installing in a 4-post rack 3-4 installing on a tabletop 3-12 maintaining C-1 WAE-512 memory specifications A-2 WAE-612 memory specfications A-2 WAFS software File Engine mode 1-6 warnings installation 2-1 WCCP 1-6 Web Cache Communication Protocol. See WCCP weight WAE A-3 Wide Area Application Engine. See WAE Wide Area Applica

• Cisco Wide Area Application Engine 612, B-1 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 APPENDIX B Troubleshooting the System Hardware If your system is not working as expected, begin troubleshooting using the procedures in this appendix. This appendix guides you through some initial checks and procedures that can solve basic system problems. This appendix contains the following sections: • Checking the Basics, page B-1 • Checking Connections and Switches, page B-2 Checking the Basics To solve some basic system problems, follow these steps: Step 1

• Cisco Wide Area Application Engine 612, 1 Connection: WAE 1 to LAN switch Fast Ethernet: LAN0 (InlinePort 1/0/lan) Cable type: Straight-through 2 Connection: WAE 1 to WAE 2 Fast Ethernet: WAE1 WAN0 (InlinePort 1/0/wan) to WAE 2 LAN0 (InlinePort 1/0/lan) Cable type: Crossover 3 Connection: WAE 2 to WAN router Fast Ethernet: WAE 2 WAN0 (InlinePort 1/0/wan) Cable type: Crossover 1-23 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Chapter 1 Introducing the Cisco Wide Area Application Engine Hardware Features Figure 1-15 Cabling Between Two Inline WAEs 0 1 2 3 LINK/ACT 100 1000 BYPASS 0 1 2 3 LINK/ACT 100 1000 BYPASS 240089 WAE1 inline a

• Cisco Wide Area Application Engine 612, Preface Documentation Feedback xiv Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Cisco Ordering tool: http://www.cisco.com/en/US/partner/ordering/ Cisco Marketplace: http://www.cisco.com/go/marketplace/ Ordering Documentation Beginning June 30, 2005, registered Cisco.com users may order Cisco documentation at the Product Documentation Store in the Cisco Marketplace at this URL: http://www.cisco.com/go/marketplace/ Cisco will continue to support documen

• Cisco Wide Area Application Engine 612, xix Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Preface Obtaining Additional Publications and Information Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is available from various online and printed sources. • Cisco Marketplace provides a variety of Cisco books, reference guides, documentation, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL: http://www.cisco.com/go/marketplace/ • Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit f

• Cisco Wide Area Application Engine 612, Chapter 1 Introducing the Cisco Wide Area Application Engine Software Functional Description 1-4 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Figure 1-3 WAE-512 and WAE-612 Back Panel 115921 Software Functional Description The operation of the WAE is dependent on the software application that is installed on it. This section describes WAAS, ACNS and WAFS software: • WAAS Software Description, page 1-4 • ACNS Software Description, page 1-5 • WAFS Software Description, page 1-6 WAAS Software Description With WAAS software installed, the WAE appliance functions as either a WAAS Central Manager or a WAAS Appli

• Cisco Wide Area Application Engine 612, v Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Contents Connecting Cables 3-13 Connecting Power and Booting the System 3-15 Checking the LEDs 3-15 Removing or Replacing a Cisco Wide Area Application Engine 3-15 CHAPTER 4 Installing Hardware Options 4-1 Removing the Cover and Bezel 4-1 Installing Adapters 4-3 Installing DIMMs 4-6 Working with Hard Disk Drives 4-10 Installing SATA Hard Disk Drives 4-11 Installing an SAS Hard Disk Drive 4-13 Completing the Installation 4-15 APPENDIX A Technical Specifications A-1 Appliance Specifications A-1 Adapter Specif

• Cisco Wide Area Application Engine 612, Chapter 3 Installing the Cisco Wide Area Application Engine Connecting Cables 3-14 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Figure 3-12 WAE-512 and WAE-612 Back Panel Connectors and Receptacles 56 7 8 9 4 3 1 2 151925 1 AC power receptacle 2 Mouse connector 1. Not required for normal operation. Can be used for troubleshooting purposes. 1 3 Keyboard connector 1 4 Serial port 5 Monitor connector 1 6 Ethernet 2 port connector 7 Ethernet 1 port connector 8 USB 1 port (not supported) 9 USB 2 port (not supported) Note The system software does not support the use of a keyboa

• B-3 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Appendix B Troubleshooting the System Hardware Checking Connections and Switches To check all the connections and switches, follow these steps: Step 1 Power down the system, including any attached peripherals such as external drives. Disconnect all the power cables from their electrical

• 3-11 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Chapter 3 Installing the Cisco Wide Area Application Engine Installing the Cisco Wide Area Application Engine Note Leave enough slack in the cables to allow for sliding the device in or out of the rack. Step 9 To transport the rack to another location with the chassis install

• Cisco Wide Area Application Engine 612, Chapter 3 Installing the Cisco Wide Area Application Engine Installing the Cisco Wide Area Application Engine 3-10 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Figure 3-8 Removing the Shipping Bracket TO REMOVE BRACKET, PUSH HERE AND SLIDE FOR SHIPPING PURPOSES ONLY 1 134407 1 Release tab Step 8 Attach the power cords and the Ethernet cables to the rear of the device. Route the cables to the left corner of the chassis (as viewed from the rear) and use the cable straps to secure the cables to the slide rails. (See Figure 3-9.) Figure 3-9 Securing the Cables 134408

• 1-5 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 Chapter 1 Introducing the Cisco Wide Area Application Engine Software Functional Description • Migrate application and file servers from branch offices into centrally managed data centers. • Minimize unnecessary WAN bandwidth consumption through the use o

• Cisco Wide Area Application Engine 612, Chapter 1 Introducing the Cisco Wide Area Application Engine Introduction 1-2 Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide OL-9137-02 When WAAS software is installed, the WAE appliance can function as either a Central Manager or as an Application Acceleration Engine. When ACNS software is installed, the WAE appliance functions as a Content Engine or one of the other ACNS device modes (Content Router or Content Distribution Manager). When WAFS software is installed, the WAE appliance functions as a File Engine. Figure 1-1 shows the WAE-512 and Figure 1-2 shows the WAE-612. Figure 1-1 WAE-512—Front View 151919 Cisco WAE 500

Related Products and Documents (Network Card):

Comparable Devices:

Similar Resources:

• Panasonic Light Emitting Diodes LN49YPX (3 pages) SHD00394BEK This product complies with the RoHS Directive (EU 2002/95/EC).Publication date: November 20081Light Emitting DiodesLN49YPXRound Typeφ4.0 mmAbsolute Maximum Ratings Ta = 25°CParameter Symbol Rating UnitPower dissipation PD90 mWForward current IF30 mAPulse forward current *IFP150 mAReverse voltage VR4 VOperating ambient temperature Topr� …

• Texas Instruments DUAL SOCKET PC CARD CONTROLLER PCI1520 Implementation (25 pages) Application ReportSCPA033 - October 20021PCI1520 Implementation GuideComputer Connectivity SolutionsABSTRACTThis document is provided to assist platform designers using the PCI1520 dual-socket PCCard controller. Detailed information can be found in the PCI1520 data manual.However, this document provides design suggestions for the various options whendesignin …

• D-Link PCMCIA WIRELESS ASAPTER DWL-650 (12 pages) DWL-650 Wireless Cardbus AdapterCD-ROM (containing Manual and Warranty)Before You BeginCheck Your Package ContentsThese are the items included with your DWL-650 purchase: If any of the above items are missing, please contact your reseller.©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respecti …

• 3Com EtherLink 3C905C-TX-M (15 pages) Looking for more information?Visituson thewebat http://www.artisan-scientific.com for more information:•PriceQuotations •Drivers·TechnicalSpecifications.Manuals and DocumentationArtisanScientificisYou~Sourcefor:QualityNewandCertified-Used/Pre:-awned ECJuiflment•TensofThousandsofIn-StockItems•HundredsofManufacturersSupported•FastShipping andDelIve1 …

• SMC Networks SMCWUSB32 (45 pages) SMC WUSB32 EZ-ConnectTMWireless USB Flash DriveModel Number: SMC WUSB32Quick Installation GuideInstallationskurzanleitungGuide d'installation rapideGuía de inicio rápidoGuida rapida all'avvioSnabbinstallationBeknopte installatiehandleidingManual de instalação rápidaEZ-ConnectTMWireless USB Flash DriveEZ-ConnectTMWireless USB Flash DriveFlash D …

• National Instruments SCC-AI Series (13 pages) USER GUIDESCC-AI Series Isolated Analog Input ModulesThe SCC-AI Series isolated analog input modules (SCC-AIXX) can extract a relatively low-amplitude input signal from a high-common-mode voltage so the E Series DAQ device can measure the input signal. They also can amplify and filter the input signal, resulting in higher measurement resolution and accuracy. …

Comments, Questions and Opinions: