Cisco 1811 Quick Start Manual

Text of Cisco 1811 User Guide:

• Cisco 1811, Quick Start Guide Cisco 1811 and 1812 Integrated Services Router Cabling and Installation INCLUDES LICENSE AND WARRANTY INFORMATION 1 Cisco One-Year Limited Hardware Warranty Terms 2 Overview 3 Unpacking the Box 4 Connecting the Router 5 Connecting Antennas to the Router RP-TNC Connectors 6 Configuring the Router Using Cisco Router and Security Device Manager 7 Connecting a PC to the Router Console Port 8 Verifying Your Installation 9 Obtaining Documentation and Submitting a Service Request Note: For localized versions of these instructions, please see the following URL: http://www.cisco.com/univercd/cc/td

• Cisco 1811, 2 1 Cisco One-Year Limited Hardware Warranty Terms There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranty applicable to Cisco software, is included on the CD that accompanies your Cisco product. Follow these steps to access and download the Cisco Information Packet and your warranty document from the CD or from Cisco.com. 1. Launch your browser, and go to this URL: http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm The Warranties and License Agreements

• Cisco 1811, 3 Complete the information below, and keep it for reference. 2 Overview This document describes the steps for installing the Cisco 1811 and the Cisco 1812 integrated services routers. The Cisco 1811 and Cisco 1812 routers are fixed-configuration routers. They each include an integrated 8-port 10/100-Mbps Ethernet switch, two onboard Fast Ethernet WAN ports, two dual USB 2.0 ports, and optional 802.11a/b/g wireless LAN support. The switch ports and the onboard 10/100-Mbps Ethernet ports support 802.1Q virtual LAN (VLAN) encapsulation and enable you to configure demilitarized zones (DMZs), using VLANs and Cisco IOS firewall features. The switch ports are also optionally upgradab

• Cisco 1811, 4 Figure 1 Items Included with the Cisco 1811 and Cisco 1812 Integrated Services Router The shipment should include the following items: • One Cisco 1811 router or one Cisco 1812 router • One blue RJ-45-to-DB-9 console cable • One DB-9-to-DB-25 adapter • One black power supply cord • One Power over Ethernet (PoE) power supply, if the router was purchased with the PoE option • Product documentation • One CD-ROM containing Cisco Router and Security Device Manager (SDM) • One antenna kit (optional) Items You Need to Provide Depending on your network environment, you may need to provide some of

• Cisco 1811, 5 4 Connecting the Router Figure 2 shows a typical installation of a Cisco 1811 or Cisco 1812 router. Figure 2 Typical Installation of a Cisco 1811 or Cisco 1812 Router Follow these steps to connect the router to the power supply, your local network, and your service provider network: Step 1 Connect power to the router as shown in Figure 2: a. Connect the separate power cord to the power socket on the back panel of the router. b. Connect the other end of the separate power cord to a power outlet. Note If you have a router with the PoE option, you must connect the PoE power su

• Cisco 1811, 6 Step 3 To use Cisco Router and Security Device Manager (SDM) to configure your router, you must connect a PC to the first Ethernet switch port. Connect one end of an Ethernet cable to one of the Ethernet switch ports (FE 2–FE 9), and connect the other end to the Ethernet port on your PC. Caution Always connect the Ethernet cable to an Ethernet port on the router. Accidentally connecting the cable to the wrong port can damage your router. Step 4 To connect the router to your service provider network, connect one end of an Ethernet cable to a 10/100 Fast Ethernet p

• Cisco 1811, 7 Figure 3 Connecting Antennas to the Router For information about configuring the wireless LAN functionality of your router, see the Cisco Access Router Wireless Configuration Guide at the following URL: http://www.cisco.com/en/US/docs/routers/access/1800/wireless/configuration/guide/awg.html 6 Configuring the Router Using Cisco Router and Security Device Manager Cisco Router and Security Device Manager (SDM) is a web-based configuration tool that allows you to configure LAN and WAN interfaces, routing, Network Address Translation (NAT), firewalls, VPNs, and other features on your router

• 8 Follow these steps to connect the router to a terminal or PC: Step 1 Connect the RJ-45 end of the console cable to the CONSOLE port on the back panel of the router, as shown in Figure 4. Figure 4 Connecting the Console Cable to the Router Step 2 Connect the DB-9 end of the console cable to the console port (also called the serial port) on your PC. If this adapter

• Cisco 1811, 9 9 Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service

• Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 European Headquarters Cisco Systems International BV Haarlerbergpark Haarlerbergweg 13-19 1101 CH Amsterdam The Netherlands www-europe.cisco.com Tel: 31 0 20 357 1000 Fax: 31 0 20 357 1100 Americas Headquarters Cisco Systems, In

More Instructions:

Cisco 1811 Datasheet 17-08-2023 16

DOWNLOAD

Related Products and Documents (Network Router):

Comparable Devices:

Similar Resources:

• D-Link DSL-2640B (16 pages) 1Note :Using a power supply with a different voltage rating will damage and void the warranty of this product.Quick Installation GuideDSL-2640BALL-IN-ONE WIRELESS G ADSL2+ ROUTERDSL-2640B ALL-IN-ONE WIRELESS G ADSL2+ ROUTERCD-ROM (D-Link Click’n Connect. Manual and Warranty)Ethernet (CAT-5e) CablePower AdapterIf any of the items are missing, please contact …

• ZyXEL Communications ADSL 2+ Security Gateway (43 pages) ZyXEL Firmware Release Note ZyWALL 2 Plus Release 4.01(XU.0) Date: October 16, 2006 Author: Keenboy Xu Project Leader: Lorin Yeh …

• HPE FlexNetwork 10500 SERIES (317 pages) HPE FlexNetwork 10500 Switch Series Layer 2—LAN Switching Configuration Guide Part number: 5200-1896 Software version: 10500-CMW710-R7524 Document version: 6W100-20161230 …

• 3Com 3C892 - OfficeConnect ISDN Lan Modem Router (14 pages) S ETTING U P THE ISDN LAN M ODEM O N A S TATIC N ETWORK This note describes how to configure the ISDN LAN modem on a static network. If you have not determined whether your network is static, refer to the Getting Started Guide. Installing the ISDN LAN Modem If you have not already installed the ISDN LAN modem, refer to the diagram while following …

• HP Surestore 40fx - Optical Jukebox (12 pages) Adding 1 Drive to theC1100 Series JukeboxHP Part No. C1156-90000Printed in USA June, 1996Edition 1 0696Important! Read This FirstBEFORE starting this upgrade, obtain the following:* The downloadable code required for this upgrade. FTP this code* A PC with a SCSI interface and appropriate cables from hpgrsg.gr.hp.com (15.38.89.10) using an "anonymous& …

• D-Link DSL-2750B (6 pages) Support – call 1300 850 462 D-Link DSL-2750b set up guide for NBN 1. Locate the NBN Network Termination Device inside your home/business. 2. At the bottom of the Network Termination Device plug an Ethernet cable into UNI-D Port 1. Please note: If you already have an NBN delivered using UNI-D port 1, our NBN service will be delivered in the n …

Comments, Questions and Opinions: