Billion BiPAC 3012G Operation & User’s Manual

Text of Billion BiPAC 3012G User Guide:

• USING THIS DOCUMENT This document provides detailed user guidelines for Wireless LAN USB Adaptor operation and setting-up. Though every effort has been made to ensure that this document is up-to-date and accurate, more information may have become available subsequent to the production of this guide. RELEASE HISTORY Content Chapter 1 Introduc

• Chapter 1 Introduction Thank you for purchasing Wireless LAN USB Adaptor. Wireless LAN USB Adaptor is a perfect combination of both performance and cost-effective product introduced. It is sincerely hoped that you can enjoy the wireless world through this solidly profiled wireless adaptor. It provides a full solution of all the IEEE 802.11 b/g protocols which pass the W

• Chapter 2 Specifications Host system connections Interface Fully complies with USB 2.0 or 1.1 USB date transfer rate USB high speed (480Mbps), and full speed (12Mbps) Wireless LAN (WLAN) environment connections 3

• Billion BiPAC 3012G, Chapter 3 Installation/ Uninstallation 3.1 Installation Before you proceed with the installation, please notice the following descriptions. Note1: The following installation was operated under Windows XP. (Procedures are similar for Windows 98SE/Me/2000.) Note2: If you have installed the WLAN USB driver & utility before, please uninstall the old version first. 1. If you insert the Wireless LAN Network Adaptor into your computer USB port before installing the software program from the CD, then auto installation window pops up as follows: 2. Click Driver Installation

• 8. The system starts software installation of the WLAN USB adaptor. 9. On Windows Logo Software Installation screen, click Continue Anyway to continue. Note: Not all the drivers will have this message box. 6

• Billion BiPAC 3012G, 3.2 Uninstallation From “Wireless Network Driver and Utility” or “Control Panel” Æ ”Change or Remove Programs”. A. Uninstall the WLAN USB Adaptor Driver from “Start” Æ “All Programs” 　 Click “Uninstall” (or “Change/Remove”) to remove Wireless LAN USB Adaptor driver. 8

• Billion BiPAC 3012G, B. Click “OK” if you want to remove Wireless LAN USB Adaptor Driver. C. Click “Finish” to complete the uninstallation. 9

• Billion BiPAC 3012G, Chapter 4 RtWLAN: Wireless LAN Management GUI 4.1 Introduction of Main Window A. Main Menu The main menu includes five submenus. 　 Refresh When clicking the refresh menu, you can update and re-enumerate the contents of adaptor list area. 　 Mode (M) Wireless configuration is quickly switched to be either [Station] or [AP]. 10

• Billion BiPAC 3012G, 　 View (V) Enable/disable the presence of status bar. Without the check mark (v) the status bar will be hidden. 　 Help (H) Click the menu item “About RtWLan” to show the about dialog. The application 11

• Billion BiPAC 3012G, version and license information are shown in the about dialog. B. Adaptor List Area All connected adaptors on this system with multiple adaptor installations are displayed in this area. It is easy for users to change the selected adaptor by one click. The contents of properties area are dependant on wireless configuration that the selected adaptor is set up. If only single adaptor is installed on the system, only one adaptor is always selected. C. Properties Area The contents of this

• Billion BiPAC 3012G, configuration sections for both Station and AP mode. D. Global Control Bar Each control item on this bar affects the adaptor or management GUI directly. 　 Show Tray Icon Checking "Show Tray Icon" and clicking “Close” button, the management GUI will be minimized and stay on the tray icon located at the right bottom corner of Windows. If not, management GUI will shut down while clicking "Close" button with unchecked condition. Radio Off Turn off the radio to save power. While the radio is off, the links with other wireless

• Billion BiPAC 3012G, 4.2 Station Mode The following explanations focus on the properties area. Infrastructure and Ad-Hoc With both Infrastructure and Ad-Hoc types, the properties should look like the picture above. Six property pages present different information of current wireless network status. Please read the following explanations before you reviewing these pages, it could help you to well understand the wireless environment around the system. It is easy to use to switch property pages just by clicking left button of mouse on the title of each page. The following six sections describe detailed information of each page. 14

• A. General Page This page represents the general information of this adapter. 1. Status The status of station connection to AP. 2. Speed Current transition speed in Mbps (Mega-Bits-Per-Second). 3. Type Current wireless LAN configuration type. 4. Encryption Current encryption mode used. 5. SSID Name of wireless network. 6. Signal Strength The average signal q

• Billion BiPAC 3012G, B. Profile Page This page provides profiles management such as add, remove, edit and duplicate just by pressing the respected button. Available Profile(s) The list box shows all the created profiles. 1. Add Add a new profile for AP or IBSS (Ad-Hoc mode). 2. Remove Remove the selected profile. 3. Edit Edit contents of selected profile. 4. Duplicate Make copy of selected profile. 5. Set Default Set the selected profile as default selection. 6. Available Network Page This page presents all BSS, including AP and IBSS, around this system. You can p

• Billion BiPAC 3012G, C. Available Network(s) Show network connection around this system 1. Refresh Rescan network connection around this system. 2. Add to Profile Create profile for selected network connection and add it to to profile list. D. Advanced Page 17

• Billion BiPAC 3012G, 1. Power Save 　 None: without power save function. 　 Min: wake up more frequently to receive packets. 　 Max: wake up less frequently to receive packets. 2. Wireless Mode 　 802.11b 　 802.11g/b 3. 802.11b Preamble Mode Long: 　 higher quality but with lower performance than preamble short mode. Short: Normal quality but with higher performance than preamble long mode. Auto: use the preamble mode of current. BSS. 4. Fragment Threshold The threshold of fragment length. Higher threshold increase data transition performance with good signal quality. However, in a

• Billion BiPAC 3012G, E. Status Page z 　Manufacture z NDIS Driver Version: Driver version 　 z Short Radio Header: No 　 z Encryption: Current encryption mode. 　 z Authenticate: Authentication state 　 z Channel Set: Selected channel plan currently. 　 z MAC Address: MAC address of th 　 is adapter. z Data Rate: Wireless LAN transition speed 　 z Channel(Frequency): Current channel number 　 z Status: Wireless network status 　 z SSID: name of connecting AP 　 z Network Type: Indicate current network configuration type 　 z Powe

• Billion BiPAC 3012G, 4.3 AP Mode A. General Page This page provides general information of this AP, including name, MAC address and list of joined stations. 1. SSID The name of this AP. 2. BSSID Six two-digital numbers of the MAC address of this AP. 3. Association Table It is the list of joined stations to this AP. 20

• Billion BiPAC 3012G, 4. AID (Association ID) The AID field is a value assigned by an AP during association that represents 16-bit ID of a station. It is a unique value assigned by AP. 5. MAC address It is the six two-digit numbers that assemble the MAC address of respected joined station. 6. Life Time It is the timer that counts down from 10 minutes whenever the AP connects thestation successfully. If an STA associated to SW AP does not have any interaction with the AP in 10 min

• Billion BiPAC 3012G, without network authentication. Encryption ~ WEP: you decide to setup the basic data encryption with a defined network key. ■ Shared Key + WEP You decide to apply both authentication and data encryption to prevent unauthouized login. ■ WPA-PSK + TKIP The most advanced authentication and data encryption that provide the best security protection. 7.4. ASCII/ PASSPHRASE The most advanced authentication and data encryption that provide the best security protection. ■ ASCII: You shou

• Billion BiPAC 3012G, 1. Beacon Interval This filed indicates the interval between each beacon that this AP sends out in unit of TU (1024 micro-seconds). 2. DTIM Period The DTIM Period field is the number of Beacon intervals between successive DTIMs. 3. Preamble Mode ■ Long: higher quality but with lower performance than preamble short mode. ■ Short: Normal quality but with higher performance then preamble long mode. ■ Auto: select the proper preamble mode by current signal frame information.

• Billion BiPAC 3012G, D. SoftAP Page 1. ConnName List all network connections to this system. You can pick up one from the listed item(s) whose network domain you would want to connect to. 2. Select Make the desired network connection to public network. 3. ICS Internet Connection Sharing. It enables this AP to create the domain to share this internet/intranet network connection 4. Firewall Any of a number of security schemes that prevents unauthorized users from gaining access to a computer network, or that monitors transfers of information to and from t

• Appendix 1: How to Use 802.1x ( Step by Step ) Step 1 : Set Network Authentication mode to WPA 802.1x ,or WPA2 802.1x Step 2 : Set Data Encryption to TKIP ,or AES Step 3 : Set EAP Type to MD5 , GTC , TLS , LEAP , TTLS ,or PEAP 25

• Billion BiPAC 3012G, Step 3.1.1 : When set TTLS, set Tunnel Type to CHAP , MSCHAP , MSCHAP-V2 , PAP , or EAP-MD5 Step 3.1.2 : When set PEAP, set Tunnel Type to MD5 , GTC , TLS , or MSCHAP-V2 Step 3.2 If you do not set PEAP to TLS ,you could use certificate. Step 4 : After you finish above steps. You should fill up the following fields( Username , Identity , Password ). User name : Certificated user name . Identity : User's identity on the RADIUS server Password : User's password on the RADIUS server 26

• Billion BiPAC 3012G, Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User’s Manual. Or please contact the dealer where you purchased this product. Contact Billion WORLDWIDE http://www.billion.com 27

More Instructions:

	Billion BiPAC 3012G Quick start manual 26-08-2022 5	DOWNLOAD
	Billion BiPAC 3012G Specifications 24-02-2023 1	DOWNLOAD

Related Products and Documents (Wireless Router):

Comparable Devices:

Similar Resources:

• ZyXEL Communications ZyAir G-2000 PlusV2 (10 pages) ZyXEL Confidential ZyXEL Firmware Release Note ZyAIR G-2000PLUS v2 Release 3.60(AAF.1)C0 Date: June 15, 2006 Author: Watties Lin 360AAF1C0.RTF 1/10 …

• TRENDnet TEW-P1U1P (2 pages) TRENDnet's TEW-P1U1P is a wireless multi-protocol print server that transforms virtually all stand-alone USB and Parallel printer into shared network printers. The TEW-P1U1P incorporates IEEE 802.11b wireless technology for integrating into existing wireless network. An auto-sensing 10/100Mbps RJ-45 interface is also available for trouble-free Ethernet …

• TP-Link Archer AX90 (2 pages) If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable to the router’s 2.5 Gbps WAN/LAN port and follow step 3 and 4 to complete the hardware connection.ModemUnplug the powerUnplug the power to turn o your modem, if any, and remove the backup battery …

• Atlantis Land VoIPMaster A02-RAV260-W54 (2 pages) VoIP RouterVoIPMasterSocietà certicata ISO 9001:2000VoIPMaster 260W Wireless VoIPADSL2+ Router • Modem ADSL2+ integrato per accesso Internet ad alta velocità• IEEE802.11g Wireless AP (sino a 54Mbps) con supporto WEP/ WPA/WPA2• Switch integrato con 4 porte 10/100Mbps Fast Ethernet • Una porta FXS en una porta FXO • Antenna rimuov …

• D-Link DWR-932 (80 pages) 4G/LTE MOBILE ROUTERDWR-932QUICK INSTALLATION GUIDEINSTALLATIONSANLEITUNGGUIDE D’INSTALLATIONGUÍA DE INSTALACIÓNGUIDA DI INSTALLAZIONEINSTALLATIEHANDLEIDINGINSTRUKCJA INSTALACJIINSTALAČNÍ PŘÍRUČKATELEPÍTÉSI SEGÉDLETINSTALLASJONSVEILEDNINGINSTALLATIONSVEJLEDNINGASENNUSOPASINSTALLATIONSGUIDEGUIA DE INSTALAÇÃOΟΔΗΓΟΣ ΓΡΗΓΟΡΗΣ ΕΓΚΑ …

• Linksys PAP2 (2 pages) Model No.Quick InstallationModel No.Voicewith 2 Ports for Voice-over-IPPackage Contents• Phone Adapter with 2 Ports for Voice-over-IP• Power Adapter • Installation and Troubleshooting Guide on CD-ROM •Network Cable• Quick Installation • Registration Information Card • Vonage Service Materials 1Connect the Phone AdapterA Connect the included Eth …

Comments, Questions and Opinions: