Manualios.com

Cisco WRP400-G1 - Wireless Router Administration Manual

  • WRP400-G1 - Wireless Router Wireless Router
  • maZn6M9.Cv9D6
  • Administration Manual
  • PDF / Adobe Acrobat Reader
  • 173

Cisco WRP400-G1 - Wireless Router Manual Online:

4.35, 2942 votes
Cisco WRP400-G1 - Wireless Router User Manual
Cisco WRP400-G1 - Wireless Router User Guide
Cisco WRP400-G1 - Wireless Router Online Manual

Text of Cisco WRP400-G1 - Wireless Router User Guide:

  • Cisco WRP400-G1 - Wireless Router, Advanced Voice Fields Line page Cisco Small Business WRP400 Administration Guide 101 A Voice tab > Line page > Subscriber Information section Display Name Display name for caller ID. User ID Extension number for this line. Password Password for this line. Use Auth ID To use the authentication ID and password for SIP authentication, select yes. Otherwise, select no to use the user ID and password. The default is no. Auth ID Authentication ID for SIP authentication. Directory Number Enter the number for this line. Call Capacity Maximum number of calls allowed on this l

  • Cisco WRP400-G1 - Wireless Router, Secure Call Implementation Cisco Small Business WRP400 Administration Guide 55 3 Generating a Mini Certificate Cisco provides a Mini Certificate Generator for the generation of mini certificates and private keys. Partners can download the Mini Certificate Generator by going to Cisco Partner Central, Voice & Conferencing page, Technical Resources section. Use the following URL: www.cisco.com/web/partners/sell/smb/products/ voice_and_conferencing.html#~vc_technical_resources NOTE The partner sites require a logon. The Mini Certificate Generator u

  • Cisco WRP400-G1 - Wireless Router, Configuring Voice Services Optimizing Fax Completion Rates Cisco Small Business WRP400 Administration Guide 39 3 Optimizing Fax Completion Rates Issues can occur with fax transmissions over IP networks, even with the T.38 standard, which is supported by the WRP400. You can adjust several settings on your WRP400 to optimize your fax completion rates. NOTE Only T.38 Fax is supported. The WRP400 supports one connection. STEP 1 Ensure that you have enough bandwidth for the uplink and the downlink. • For G.711 fallback, it is recommend to have approximately 100Kbps. • For T.38, allocate at least 50

  • Cisco WRP400-G1 - Wireless Router, Advanced Voice Fields Line page Cisco Small Business WRP400 Administration Guide 107 A DTMF Tx Method Select the method to transmit DTMF signals to the far end: InBand, AVT, INFO, Auto, InBand+INFO, or AVT+INFO. InBand sends DTMF using the audio path. AVT sends DTMF as eypents. INFO uses the SIP INFO method. Auto uses InBand or AVT based on the outcome of codec negotiation. The default is Auto. DTMF Tx Mode DTMF Detection Tx Mode is available for SIP information and AVT . Options are: Strict or Normal. The d

  • Cisco WRP400-G1 - Wireless Router, WRP400 Provisioning Reference Cisco Small Business WRP400 Administration Guide 162 C Single Port Forwarding <SINGLE_PORT_ FORWARDING> <SINGLE_PORT_FORWARDING>forward _single=name:on|off:both|tcp|udp:external -port:internal-port:ip</ SINGLE_PORT_FORWARDING> NOTE: To configure port forwarding, you also should configure a DHCP reservation for the designated server. forward_single: Supports port forwarding on the specified port name: Application name; enter a name or use the following names for standard applications: FTP, Telnet, SMTP,DNS,TFTP,Finger, HTTP,

  • Cisco WRP400-G1 - Wireless Router, Advanced Voice Fields Regional page Cisco Small Business WRP400 Administration Guide 87 A Force G726r24 Code Makes this codec the only codec that can be used for the associated call. The default is *0272624. Prefer G726r32 Code Makes this codec the preferred codec for the associated call. The default is *0172632. Force G726r32 Code Makes this codec the only codec that can be used for the associated call. The default is *0272632. Prefer G726r40 Code Makes this codec the preferred codec for the associated call. The default is *0172640. Force G726r40 Code Ma

  • Cisco WRP400-G1 - Wireless Router, Secure Call Implementation Cisco Small Business WRP400 Administration Guide 52 3 Secure Call Implementation This section describes secure call implementation with the WRP400 . It includes the following topics: • “Enabling Secure Calls” section on page 52 • “Secure Call Details” section on page 53 • “Using a Mini-Certificate” section on page 54 • “Generating a Mini Certificate” section on page 55 NOTE This is an advanced topic meant for experience installers. Also see the Provisioning Guide at the following URL: www.cisco.com/en/US/docs/voice_ip_comm/csbpvga/ata/provisioning/guide/ Cisco_Small_Business_IP_Telephony_

  • Cisco WRP400-G1 - Wireless Router, Advanced Voice Fields User page Cisco Small Business WRP400 Administration Guide 113 A Voice tab > User page > Supplementary Service Settings section The WRP400 provides native support of a large set of enhanced or supplementary services. All of these services are optional. The parameters listed in the following table are used to enable or disable a specific supplementary service. A supplementary service should be disabled if a) the user has not subscribed for it, or b) the Service Provider intends to support similar service using other means than relying on the WRP400. CW Setting Call Waiting on/

  • Cisco WRP400-G1 - Wireless Router, Product Overview and Deployment Guidelines Remote Provisioning Cisco Small Business WRP400 Administration Guide 18 1 Both HTTP and TFTP are supported for the upgrade operation. If no protocol is specified, TFTP is assumed. If no server-name is specified, the host that requests the URL is used as server-name . If no port specified, the default port of the protocol is used. (69 for TFTP or 80 for HTTP) The firmware-pathname is typically the file name of the binary located in a directory on the TFTP or HTTP server. If no firmware-pathname is specified,

  • Cisco WRP400-G1 - Wireless Router, F Cisco Small Business WRP400 Administration Guide 170 Where to Go From Here This appendix describes additional resources that are available to help you and your customer obtain the full benefits of the WRP400. Support Cisco Small Business Support Community www.cisco.com/go/smallbizsupport Online Technical Support and Documentation (Login Required) www.cisco.com/support Phone Support Contacts www.cisco.com/en/US/support/tsd_cisco_small_ business_support_ center_contacts.html Software Downloads (Login Required) Go to tools.cisco.com/

  • Cisco WRP400-G1 - Wireless Router, Advanced Voice Fields Regional page Cisco Small Business WRP400 Administration Guide 76 A Voice tab > Regional page > Distinctive Call Waiting Tone Patterns section Ring8 Cadence Cadence script for distinctive ring 8. The default is 60(0.25/9.75). CWT1 Cadence Cadence script for distinctive CWT 1. The default is 30(.3/9.7). CWT2 Cadence Cadence script for distinctive CWT 2. The default is 30(.1/.1, .1/9.7). CWT3 Cadence Cadence script for distinctive CWT 3. The default is 30(.1/.1, .1/.1, .1/9.3). CWT4 Cadence Cadence script for distinctive CWT 4. The default is 30(.1/.1, .3/.1, .1/9.5). CWT5 Cadence Cadence script for dis

  • Configuring Voice Services ATA S of t w a re Fe at u re s Cisco Small Business WRP400 Administration Guide 34 3 Calling Party Control Calling Party Control (CPC) signals to the called party equipment that the calling party has hung up during a connected call by removing the voltage between the tip and ring momentarily. This feature is useful for auto- answer equipment, which th

  • Cisco WRP400-G1 - Wireless Router, Data Fields Access Restrictions Cisco Small Business WRP400 Administration Guide 138 B Access Restrictions The Access Restrictions module includes the following pages: • “Access Restrictions > Internet Access” on page 138 Access Restrictions > Internet Access Enter Policy Name A name for the policy Status Policies are disabled by default. To enable the selected policy, select Enabled. Applied PCs The computers that will be affected by the policy that you selected in the Access Policy list. • MAC Address: The MAC address of the device. • IP Address: The final octet of the IP address. • IP Addr

  • Cisco WRP400-G1 - Wireless Router, 2 Cisco Small Business WRP400 Administration Guide 21 Configuring Your System for ITSP Interoperability This chapter provides configuration details to help you to ensure that your infrastructure properly supports voice services. • “Configuring NAT Mapping,” on page 21 • “Firewalls and SIP,” on page 26 • “Configuring SIP Timer Values,” on page 27 Configuring NAT Mapping As discussed in Chapter 1, “Product Overview and Deployment Guidelines,” some form of NAT mapping is needed to support VoIP. If your ITSP doe

  • D Cisco Small Business WRP400 Administration Guide 165 Troubleshooting This appendix provides solutions to problems that may occur during the installation and operation of the WRP400s. NOTE If you can't find an answer here, visit Cisco Community Central > Small Business Support Communityat the following URL: www.myciscocommunity.com/community/smallbizsupport/ voiceandconfe

  • WRP400 Provisioning Reference Cisco Small Business WRP400 Administration Guide 159 C Heartbeat for Telstra Cable Network Parameters hb_server_ip: Heartbeat server IP address ppp_username: User name; enter from 1 to 63 ASCII characters ppp_passwd: Password; enter from 1 to 63 ASCII characters To configure a Telstra Cable connection: <WAN_TYPE>wan_proto= h

  • Cisco WRP400-G1 - Wireless Router, 3 Cisco Small Business WRP400 Administration Guide 28 Configuring Voice Services This chapter describes how to configure your WRP400 to meet the customer’s requirements for voice services. • “Understanding Analog Telephone Adapter Operations,” on page 28 • “Managing Caller ID Service,” on page 37 • “Silence Suppression and Comfort Noise Generation,” on page 41 • “Configuring Dial Plans,” on page 42 • “Secure Call Implementation,” on page 52 Understanding Analog

  • Cisco WRP400-G1 - Wireless Router, Advanced Voice Fields Regional page Cisco Small Business WRP400 Administration Guide 73 A • “Outbound Call Codec Selection Codes section” section on page 86 • “Miscellaneous section” section on page 88 Voice tab > Regional page > Call Progress Tones section Dial Tone Prompts the user to enter a phone number. Reorder Tone is played automatically when Dial Tone or any of its alternatives times out. The default is 350@-19,440@-19;10(*/0/1+2). Second Dial Tone Alternative to the Dial Tone

  • Configuring Voice Services Silence Suppression and Comfort Noise Generation Cisco Small Business WRP400 Administration Guide 41 3 STEP 8 Contact technical support: • If you are an end user of VoIP products, contact the reseller or Internet telephony service provider (ITSP) that supplied the equipment. • If you are an authorized Cisco partner, contact Cisco technical suppor

  • Cisco WRP400-G1 - Wireless Router, Data Fields Wireless Configuration Cisco Small Business WRP400 Administration Guide 132 B Wireless > Wireless Security SSID The name of the wireless network Security Mode The type of security that is used on the network: WEP, WPA Personal, WPA2 Personal, WPA Enterprise, WPA2 Enterprise. WEP: • Encryption: 64 bits 10 hex digits or 28 bits 26 hex digits. Default: 64 bits 10 hex digits • Passphrase: A passphrase used to automatically generate WEP keys. • Key 1-4: Instead of using a passphrase to generate WEP keys, enter the WEP key(s) manually. • TX

  • Cisco WRP400-G1 - Wireless Router, WRP400 Provisioning Reference Cisco Small Business WRP400 Administration Guide 158 C WAN Type <WAN_TYPE> <WAN_TYPE>wan_proto=[mode], [parameters]</WAN_TYPE> wan_proto: Internet connection type; dhcp, static, pppoe, pptp, l2tp, heartbeat DHCP Parameters No other settings are required. To configure a DHCP connection: <WAN_ TYPE>wan_proto=dhcp </WAN_TYPE> Static IP Parameters wan_ipaddr: WAN IP address wan_netmask: WAN subnet mask wan_gateway: Gateway IP address To configur

  • Cisco WRP400-G1 - Wireless Router, Product Overview and Deployment Guidelines Local Area Network Guidelines Cisco Small Business WRP400 Administration Guide 11 1 Local Area Network Guidelines This section offers guidelines for setting up your Local Area Network (LAN). NOTE As you design your network, be aware that the WRP400 is intended for deployment in a very small business. The router is designed to handle the data, voice, and video traffic that would be expected by office personnel who use the Internet to find data, conduct phone conversations, transmit email, and participate in

  • Cisco WRP400-G1 - Wireless Router, Data Fields Setup Cisco Small Business WRP400 Administration Guide 128 B Max. Idle Time The number of minutes of inactivity that can elapse before an Internet connection is terminated. Default: 5 minutes Keep Alive When this feature is enabled, the WRP400 periodically checks the Internet connection. If the connection is terminated, then the WRP400 automatically re-establishes the connection. Card Status The current modem connection status as Detecting, Connecting, or Connected. Configure Mode • Auto: When this mode is enabled, the WRP400 automatically detects which card

  • Cisco WRP400-G1 - Wireless Router, Advanced Voice Fields Info page Cisco Small Business WRP400 Administration Guide 58 A Voice tab > Info page > Product Information section Voice tab > Info page > System Status section Product Name Model number/name. Serial Number Serial number. Software Version Software version number. Hardware Version Hardware version number. MAC Address MAC address. Client Certificate Status of the client certificate, which can indicate if the WRP400 has been authorized by your ITSP. Customization For a Remote

  • Cisco WRP400-G1 - Wireless Router, Configuring Dial Plans Cisco Small Business WRP400 Administration Guide 43 3 Digit Sequence Function 0 1 2 3 4 5 6 7 8 9 0 * # Enter any of these characters to represent a key that the user must press on the phone keypad. x Enter x to represent any character on the phone keypad. [sequence] Enter characters within square brackets to create a list of accepted key presses. The user can press any one of the keys in the list. • Numeric range For example, you would enter [2-9] to allow the user to press any one digit from 2 through 9. • Numeric range with other characters For example, you would enter [35-8*] to allow the user to press 3, 5, 6, 7, 8, or *. . (period) Enter a

  • Advanced Voice Fields System page Cisco Small Business WRP400 Administration Guide 61 A System page You can use the Voice tab > System page to configure your system and network connections. This page includes the following sections: • “System Configuration section” section on page 61 • “Miscellaneous Settings section” section on page 62 Voice tab > System page > System Con

  • Cisco WRP400-G1 - Wireless Router, Product Overview and Deployment Guidelines Special Requirements for Voice Deployments Cisco Small Business WRP400 Administration Guide 13 1 The available connection bandwidth determines the maximum number of simultaneous calls that the system can support with the appropriate audio quality. Use this information to determine the maximum number of simultaneous VoIP connections that the system can support. For asymmetric connections, such as ADSL, the maximum number of calls is determined by the upstream bandwidth. In general it is a good practice to use no more than 75% of

  • Cisco WRP400-G1 - Wireless Router, Data Fields Setup Cisco Small Business WRP400 Administration Guide 118 B Setup > Basic Setup Internet Setup Internet Connection Type The type of Internet connection: Automatic Configuration - DHCP, Static IP, PPPoE, PPTP, L2TP, Telstra Cable Static IP: • Internet IP Address: The IP address of your WRP400, as seen from the Internet. • Subnet Mask: The subnet mask, as seen by users on the Internet (including your service provider). • Default Gateway: The IP address of your service pr

  • Cisco WRP400-G1 - Wireless Router, Advanced Voice Fields SIP page Cisco Small Business WRP400 Administration Guide 67 A Voice tab > SIP page > Response Status Code Handling section Voice tab > SIP page > RTP Parameters section SIT1 RSC SIP response status code for the appropriate Special Information Tone (SIT). For example, if you set the SIT1 RSC to 404, when the user makes a call and a failure code of 404 is returned, the SIT1 tone is played. Reorder or Busy tone is played by default for all unsuccessful response status code for SIT 1 RSC through SIT 4 RSC. SIT2 RSC SIP response status code to INVITE on which to play the SIT2 Tone. SIT3 RSC SIP response status code to INV

  • Advanced Voice Fields Regional page Cisco Small Business WRP400 Administration Guide 90 A Daylight Saving Time Enable Daylight Saving Time can be turned on or off. This option affects the time stamp on CallerID and affects all the lines and extensions of the phone. Default is Yes (on). FXS Port Input Gain Input gain in dB, up to three decimal places. The rang

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 ViewSonic N1700W Operation & user’s manual viewsonic/n1700w-U95.pdf 09 Aug 2023 36 0.82 Mb
2 Snapper LT160H42FBV Operator's manual snapper/lt160h42fbv-Q4V.pdf 14 Aug 2023 88 8.62 Mb
3 Electrolux ESF 66060 Operation & user’s manual electrolux/esf-66060-15K.pdf 02 Aug 2023 24 1.79 Mb
4 Garmin 2620 - StreetPilot Portable Automotive GPS Navigator Owner's manual garmin/2620-streetpilot-portable-automotive-gps-navigator-4C7.pdf 09 Mar 2023 94 1.92 Mb
5 Smeg SA985-2CX Owner's manual smeg/sa985-2cx-Y78.pdf 25 Feb 2024 25 0.88 Mb
6 Craftsman 320.17256 Operator's manual craftsman/320-17256-4ZM.pdf 19 Dec 2023 36 1.81 Mb

Similar Resources:

  • TRENDnet

    TEW-651BR

    (3 pages)
    The 150Mbps Wireless N Home Router delivers the highest level of security with 6x the speed and 3x the coverage of wireless g products. Quickly install the router and use it with TRENDnet wireless n adapters to receive the full benefits of wireless n speed and coverage. The latest in wireless encryption and a secure firewall protect your valuable data. Route …
  • SMC Networks

    SMC7004AWBR

    (94 pages)
    Barricade™ WirelessBroadband RouterWireless Broadband Router◆ Internet access via –• 10 Mbps WAN port connection to xDSL/Cable modem, or• RS-232 console port connection to ISDN/PSTN modem◆ Home networking via –• Three 10/100 Mbps Ethernet switch ports, or• 11 Mbps wireless interface◆ Built-in Print Server◆ Automatic IP configuration …
  • Monaco

    BOX

    (11 pages)
    BOXINTERNET TRÈS HAUT DÉBITQuick installation guidewww.monaco.mc  …
  • SMC Networks

    SMC2602W

    (2 pages)
    www.smc-europe.com www.smc.comEZ Connect™ SMC2602W V.32.4GHz 11 Mbps Wireless PCI CardThe SMC2602W is an IEEE 802.11b-compliant 2.4GHz 11 Mbps Wireless PCI Card. It meets the needs of small business and corporate users who require an 11 Mbps wireless connection to an existing LAN. This adapter features an operating range of up to 350m, and …
  • NetComm Wireless

    NF18ACV

    (93 pages)
    VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP – NF18ACV 1 of 93 UG01040 v 1.04 December 2018 © NetComm Wireless 2018 NF18ACV – USER GUIDE VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP Doc No. UG01040 …
  • Huawei

    B683

    (12 pages)
    1 B683 Quick Start Note:  Figures in this guide are only for your reference. For details about the particular model you have chosen, contact your service provider.  Check the information about the product and its accessories when you purchase it. Some accessories are not provided in the product package. If necessary, contact your local dealer to purc …

Comments, Questions and Opinions: