Manualios.com

Cisco WRT110 Operation & User’s Manual

Cisco WRT110 Manual Online:

4.55, 1595 votes
Cisco WRT110 User Manual
Cisco WRT110 User Guide
Cisco WRT110 Online Manual

Text of Cisco WRT110 User Guide:

  • Cisco WRT110, Chapter 3 Advanced Configuration 13 RangePlus Wireless Router Gateway This is the IP address of the gateway device that allows for contact between the Router and the remote network or host. Interface This interface tells you whether the Destination IP Address is on the LAN & Wireless (Ethernet and wireless networks) or the WAN (Internet). Click Show Routing Table to view the static routes you have already set up. Advanced Routing > Routing Table Routing Table For each route, the Destination LAN IP address, Subnet Mask, Gateway, and Int

  • Cisco WRT110, Appendix D Regulatory Information 35 RangePlus Wireless Router User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol: English - Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment bearing this

  • Cisco WRT110, Appendix D Regulatory Information 34 RangePlus Wireless Router Avis d’Industrie Canada Cet appareil est conforme aux normes NMB003 et RSS210 d’Industrie Canada. L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : il ne doit pas produire de brouillage et il doit accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Le dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximum de 2 dBi. Les règlements d’Industrie Canada interdisent strictement l’utilisation d’antennes dont le

  • Cisco WRT110, Chapter 3 Advanced Configuration 21 RangePlus Wireless Router ftp servers, e-mail servers, or other specialized Internet applications. (Specialized Internet applications are any applications that use Internet access to perform functions such as videoconferencing or online gaming. Some Internet applications may not require any forwarding.) When users send these types of requests to your network via the Internet, the Router will forward those requests to the appropriate servers (computers). Before using forwarding, you should assign static IP addresses to the designated servers (use the DHCP Reservation feature on the Basic Setup scr

  • Cisco WRT110, Chapter 3 Advanced Configuration 27 RangePlus Wireless Router NOTE: The Router may lose the settings you have customized. Before you upgrade its firmware, write down all of your custom settings. After you upgrade its firmware, you will have to re-enter all of your configuration settings. Upgrade Firmware Before upgrading the firmware, download the Router’s firmware upgrade file from the Linksys website, www.linksys.com. Then extract the file. Please select a File to Upgrade Click Browse and select the extracted firmware upgrade file. Start to Upgrade After

  • Cisco WRT110, Chapter 3 Advanced Configuration 9 RangePlus Wireless Router automatically re-establish your connection as soon as you attempt to access the Internet again. To use this option, select Connect on Demand. In the Max Idle Time field, enter the number of minutes you want to have elapsed before your Internet connection terminates. The default Max Idle Time is 15 minutes. Keep Alive: Redial Period If you select this option, the Router will periodically check your Internet connection. If you are disconnected, then the Router will automatically re-establish your connection. To use

  • Cisco WRT110, Chapter 3 Advanced Configuration 19 RangePlus Wireless Router Access Restrictions > Internet Access Policy Internet Access Policy Access Policy Access can be managed by a policy. Use the settings on this screen to establish an access policy (after Save Settings is clicked). Selecting a policy from the drop- down menu will display that policy’s settings. To delete a policy, select that policy’s number and click Delete This Policy. To view all the policies, click Summary. Summary The policies are listed with the following information: No., Policy Name, Acces

  • Cisco WRT110, Appendix A Troubleshooting 29 RangePlus Wireless Router Appendix A: Troubleshooting Your computer cannot connect to the Internet. Follow these instructions until your computer can connect to the Internet: Make sure that the Router is powered on. The Power LED should be blue and not flashing. If the Power LED is flashing, then power off all of your network devices, including the modem, Router, and computers. Then power on each device in the following order: Cable or DSL modem Router Computer Check the cable connections. The computer should be connected to one of the ports numbered 1-4 on the Router, and the modem must

  • Appendix C Warranty Information 32 RangePlus Wireless Router rejected. Do not include any other items with the product you are returning to Linksys. Defective product covered by this limited warranty will be repaired or replaced and returned to you without charge. Customers outside of the United States of America and Canada are responsible for all shipp

  • Cisco WRT110, Chapter 3 Advanced Configuration 24 RangePlus Wireless Router Summary This lists the QoS entries you have created for your applications and devices. Priority This column displays the bandwidth priority of High, Medium, Normal, or Low. Name This column displays the application, device, or port name. Information This column displays the port range or MAC address entered for your entry. If a pre-configured application or game was selected, there will be no valid entry shown in this section

  • Cisco WRT110, Chapter 3 Advanced Configuration 14 RangePlus Wireless Router on configuring wireless security for the Router, refer to “Chapter 2: Wireless Security Checklist.” Wireless Security Security Mode Select the security method for your wireless network. If you do not want to use wireless security, keep the default, Disabled. WPA Personal NOTE: If you are using WPA, always remember that each device in your wireless network MUST use the same WPA method and shared key, or else the network will not function properly. Security Mode > WPA Personal Encryption WPA s

  • Cisco WRT110, Appendix C Warranty Information 31 RangePlus Wireless Router Appendix C: Warranty Information Limited Warranty Linksys warrants this Linksys hardware product against defects in materials and workmanship under normal use for the Warranty Period, which begins on the date of purchase by the original end-user purchaser and lasts for the period specified below: One (1) year for new product Ninety (90) days for refurbished product This limited warranty is non-transferable and extends only to the original end-user purchaser. Your exclusive remedy and Linksys’ entire liability under this limited warranty will be for Linksys, at it

  • Chapter 3 Advanced Configuration 28 RangePlus Wireless Router DHCP Clients Table DHCP Client Table The DHCP Client Table lists computers and other devices that have been assigned IP addresses by the Router. The list can be sorted by Client Name, Interface, IP Address, MAC Address, and Expired Time (how much time is left for the current IP address). To remove a DHCP client, cl

  • Cisco WRT110, Chapter 3 Advanced Configuration 25 RangePlus Wireless Router UPnP Universal Plug and Play (UPnP) allows Windows Me and XP to automatically configure the Router for various Internet applications, such as gaming and videoconferencing. UPnP If you want to use UPnP, keep the default setting, Enabled. Otherwise, select Disabled. Allow Users to Configure Keep the default, Enabled, if you want to be able to make manual changes to the Router while using the UPnP feature. Otherwise, select Disabled. Allow Users to

  • Cisco WRT110, Appendix D Regulatory Information 33 RangePlus Wireless Router Appendix D: Regulatory Information FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thi

  • Cisco WRT110, Chapter 3 Advanced Configuration 15 RangePlus Wireless Router Security Mode > WPA2 Enterprise Encryption WPA2 supports two encryption methods, TKIP and AES, with dynamic encryption keys. Select the type of algorithm, AES or AES or TKIP. The default is AES or TKIP. RADIUS Server Enter the IP address of the RADIUS server. RADIUS Port Enter the port number of the RADIUS server. The default value is 1812. Shared Secret Enter the key shared between the Router and the server. Key Renewal Enter a Key Renewal period, which instructs the Router how often it should change the encryption keys. The default Key Renewal period is 3600 seconds. RADIUS Th

  • Cisco WRT110, Chapter 3 Advanced Configuration 26 RangePlus Wireless Router Diagnostics Ping Test The Ping test checks the status of a connection. IP or URL Address Enter the address of the PC whose connection you wish to test. Packet Size Enter the packet size you want to use. The default is 32 bytes. Times to Ping Enter many times you wish to test it. Start to Ping To run the test, click this button. The Ping Test screen will show if the test was successful. Click Close to return to the Diagnostics screen. Diagnostics > Ping Traceroute Test The Traceroute test tests the performance of a connection. IP or URL Address Enter the address of the

  • Cisco WRT110, Table of Contents iii RangePlus Wireless Router Appendix D: Regulatory Information 33 FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 FCC Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Safety Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  • Cisco WRT110, Chapter 3 Advanced Configuration 12 RangePlus Wireless Router E-mail Address, TZO Key, and Domain Name Enter the settings of the account you set up with TZO. Internet IP Address The Router’s Internet IP address is displayed here. Because it is dynamic, it will change. Status The status of the DDNS service connection is displayed here. Update To manually trigger an update, click this button. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Setup > MAC Address Clone A MAC address i

  • Cisco WRT110, Appendix D Regulatory Information 38 RangePlus Wireless Router Português (Portuguese) - Informação ambiental para clientes da União Europeia A Directiva Europeia 2002/96/CE exige que o equipamento que exibe este símbolo no produto e/ou na sua embalagem não seja eliminado junto com os resíduos municipais não separados. O símbolo indica que este produto deve ser eliminado separadamente dos resíduos domésticos regulares. É da sua responsabilidade eliminar este e qualquer outro equipamento eléctrico e electrónico através das instalações de recolha designadas pelas a

  • Cisco WRT110, Table of Contents ii RangePlus Wireless Router About This Guide i Icon Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Online Resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Copyright and Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Chapter 1: Product Overview 4 Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  • Cisco WRT110, Chapter 1 Product Overview 4 RangePlus Wireless Router Chapter 1: Product Overview Thank you for choosing the Linksys RangePlus Wireless Router. The Router lets you access the Internet via a wireless connection or through one of its four switched ports. You can also use the Router to share resources such as computers, printers and files. A variety of security features help to protect your data and your privacy while online. Security features include WPA2 security, a Stateful Packet Inspection (SPI) firewall and NAT technology. Configuring the Router is easy using the

  • Chapter 3 Advanced Configuration 17 RangePlus Wireless Router Advanced Wireless AP Isolation This isolates all wireless clients and wireless devices on your network from each other. Wireless devices will be able to communicate with the Router but not with each other. To use this function, select Enabled. AP Isolation is disabled by default. Frame Burst Enabling this option

  • Chapter 2 Wireless Security Checklist 6 RangePlus Wireless Router Chapter 2: Wireless Security Checklist Wireless networks are convenient and easy to install, so homes with high-speed Internet access are adopting them at a rapid pace. Because wireless networking operates by sending information over radio waves, it can be more vulnerable to intruders tha

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Hotpoint SX 896L PX S Operating instructions manual hotpoint/sx-896l-px-s-485.pdf 24 Jul 2023 20 5.72 Mb
2 Frigidaire FFC15C7AW Factory parts catalog frigidaire/ffc15c7aw-BZ5.pdf 20 Dec 2023 7 0.2 Mb
3 Bosch NEI-30 Quick install manual bosch/nei-30-Y84.pdf 14 Apr 2024 20 0.93 Mb
4 DSC Maxsys PC4164-433 Installation manual dsc/maxsys-pc4164-433-JHJ.pdf 30 Jan 2023 28
5 Unitor UWW-161 TP Instruction manual unitor/uww-161-tp-549.pdf 19 Dec 2022 32
6 Asus E10229 Operation & user’s manual asus/e10229-81H.pdf 14 Jan 2024 28

Similar Resources:

  • T-Mobile

    4G LTE CellSpot

    (4 pages)
    Attention: Important InformationThis device must be installed at your registered address with T-Mobile. Failure to maintain this address could affect your ability to contact emergency services and result in device deactivation. Visit https://my.t-mobile.com or call CARE at *611 from your handset or 1-800-937-8997 to update the device use address.Don't …
  • Interlogix

    TX-4200-01-1

    (4 pages)
    P/N 466-4431 • REV B • 14FEB14 1 / 4 Description The Personal Panic Device is a wireless device that can be used to activate police or auxiliary alarms throughout the premises. When the help button is pressed, both red LEDs flash and information is transmitted. The transmitted signal includes alarm and battery status information. When the help button is …
  • E-Lins

    H700 Series

    (91 pages)
    E-Lins H700 Series Router User Manual E‐LinsTechnologyCo.,LimitedTel:+86‐755‐29230581E‐mail:sales@e‐lins.com[email protected]www.szelins.com H700 Series Router User …
  • SMC Networks

    SMC7908VoWBRA

    (1 pages)
    1. To setup VoIP function, you need to collect VoIP configurations from your VoIP Service Provider:• Phone number• Gatekeeper IP address• Password if security feature is requiredNote: Optionally there are “Gatekeeper ID” and “H.323 ID” for additional security2. Go to web interface under “VoIP” submenu “Port Setting”, change the “Exten …
  • Panasonic

    KX-TDA30

    (214 pages)
    Model KX-TDA30/KX-TDA100/KX-TDA200Thank you for purchasing a Panasonic Hybrid IP-PBX.Please read this manual carefully before using this product and save this manual for future use.KX-TDA30/KX-TDA100/KX-TDA200: Version 2.0Hybrid IP-PBXUser Manual …
  • Solar

    Cloud-Box-M1

    (2 pages)
    Precautions of Cloud-Box-M1 usage: 1. About places of application: Complex electromagnetic environment effects wireless signals transmission. Please keep Cloud-Box-M1 device in a clean or low interference circumstance.2. About APP operation: when install “MyGreen SolarMonitor” APP, please allow all requested permissions. Otherwise,the APP may crash or …

Comments, Questions and Opinions: