Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Administration Manual

Text of Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router User Guide:

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Using the VPN Setup Wizard Running the VPN Router Software Wizard Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 175 6 Configure the Router STEP 7 Click Testing to make sure the connection is successfully established.

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring Firewall Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 92 5 To configure the IP Based ACL for the router, follow these steps: STEP1 Click Firewall > IP Based ACL. STEP 2 Configure the IP based ACL settings for the router: • Priority—Defines the order on which rule is checked against first. The smaller number has higher priority. The default rules is always be checked last. • Enable—Tells the router if the rule is active or not. You can have rules d

• Troubleshooting Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 190 A When I enter a URL or IP address, I get a time-out error or am prompted to retry. • Check if other PCs work. If they do, ensure that your workstation’s IP settings are correct (IP Address, Subnet Mask, Default Gateway, and DNS). Restart the computer that is h

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring Firewall Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 93 5 • Page Selections—Select specific page of ACL list from the drop-down menu to be displayed. Or navigate them page by page through Previous Page and Next Page button. • Add New Rule—Click this button to enter the page to define a new ACL rule. • Disable All Rule—Click this button to disable all the user defined rules. • Delete All Rule—Click this button to delete all the user defined rules. Editing IP ACL Rules The F

• Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring Wireless Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 82 5 To configure advanced wireless settings for the router, follow these steps: STEP1 Click Wireless > Advanced Settings. STEP 2 Configure the advanced wireless settings as needed by changing the following advanced para

• Getting Started with the WRVS4400N Router Placement Options Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 23 4 STEP 3 Repeat step 2 with the other stand. Wall Option To mount the Cisco WRVS4400N router on the wall, follow these steps. STEP1 Determine where you want to mount the router and install two screws (not supplied) that are 2-9/16 in. apar

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Setting Up Your Wireless-N Router Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 40 5 • Log Setting Status - E-mail—If this entry appears in the window, email cannot be sent because you have not specified an outbound SMTP server address. Click E-mail to display the Administration > Log window where you can configure the SMTP mail server. Configuring Internet Connection Settings The Setup > WAN Setup window displays Internet Connection Type and DDNS settings for configuring WAN port of the wireless router. To configure the WAN settings for the router, follow these steps: STEP1 Find ou

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring Wireless Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 81 5 • Connection Control—Prevent or Allow specific MAC addresses access to the Wireless Network. - Prevent—Denies connection to the Wireless Network through the router, for the MAC addresses specified below. - Allow—Grants connection to the Wireless Network through the router, for the MAC addresses specified below. • Connection Control List—The Wireless > Connection Control List displays the MAC addresses of selected wireless client devices to be controlled. - Wireless Client List—In

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring Firewall Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 89 5 Configuring Basic Settings The Firewall > Basic Settings window displays the firewall-specific settings of the router. To configure basic firewall settings for the router, follow these steps: STEP1 Click Firewall > Basic Settings. STEP 2 Configure the basic firewall settings: • Firewall—Enable this feature to perform deep packet inspection on all the traffic going through the router and drop the packets that do n

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Setting Up Your Wireless-N Router Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 66 5 - Block following sites—Prevent a limited set of 6to4 gateways from establishing tunnels with the router. Up to 20 sites can be configured. .

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring the VPN Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 114 5 • Encryption— The Encryption method determines the length of the key used to encrypt/decrypt ESP packets. 3DES is supported. Notice that both sides of the VPN tunnel must use the same Encryption method. • Authentication— Authentication determines a method to authenticate the ESP packets. Either MD5 or SHA1 may be selected. Notice that both sides (VPN endpoints) must use the same Authentication method. - MD5— A one way hashing algorithm that produces a 128-bit digest. - SHA1— A o

• Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring the Administration Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 134 5 Upgrading the Router Firmware The Administration > Firmware Upgrade window allows you to upgrade router firmware from a downloaded file. To upgrade firmware, download t

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring the VPN Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 106 5 • Tunnel Status - Tunnels(s) Used—Displays the number of tunnels used. - Tunnel(s) Available—Displays the number of available tunnels. - Detail button—Click Detail to display more tunnel information. - No—Displays the number of the tunnel. - Name—Displays the name of the tunnel, as defined by the Tunnel Name field on the VPN > IPSec VPN window. - Status—Displays the tunnel's status: Connected, Hostname Resolution

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring the QoS Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 121 5 Configuring QoS The QoS > QoS Setup window displays the settings needed for users to configure QoS Trust Mode for each LAN port. To configure QoS setup window settings for the router, follow these steps: STEP1 Click QoS > QoS Setup. STEP 2 Configure the QoS Setup settings: • Port ID—The number of the LAN port. • Trus

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Using Cisco QuickVPN for Windows 2000, XP, or Vista Installing the Cisco QuickVPN Software Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 198 B Copying Files Finished Installing Files STEP 3 Click Finished to complete the installation. Proceed to “Using the Cisco QuickVPN Software,” on page199.

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Using Cisco QuickVPN for Windows 2000, XP, or Vista Using the Cisco QuickVPN Software Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 201 B QuickVPN Status To terminate the VPN tunnel, click Disconnect. To change your password, click Change Password. For information, click Help. STEP 5 If you clicked Change Password and have permission to change your own password, you will see the Connect Virtual Private Connection window. Enter your password in the Old Password field. Enter your new password in the New Password f

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Setting Up Your Wireless-N Router Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 58 5 STEP 3 Click Save. Configuring the Router’s Advanced Settings The Setup > Advanced Routing window allows you to configure the router’s Operating Mode and settings for Dynamic Routing, Static Routing, and Inter-VLAN routing. To configure your router’s advanced settings, follow these steps: STEP1 Click Setup > Advanced Routing STEP 2 Fill in the settings for advanced routing configu

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring the Administration Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 133 5 Rebooting the Router The Administration > Reboot window provides means to reboot the router. To reboot the router, follow these steps: STEP1 Click Administration > Reboot. STEP 2 Click Reboot to reboot the router. This operation does not cause the router to lose any of its stored settings.

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring Firewall Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 90 5 • Multicast Pass-through—When enabled, the router allows IP Multicast traffic to come in from the Internet. The default is Disable. • SIP Application Layer Gateway—When enabled, the SIP Application Layer Gateway (ALG) allows Session Initiation Protocol (SIP) packets (used for Voice over IP) to traverse the NAT firewall. This feature can be disabled if the VoIP service provider is using other NAT traversal solutions such as STUN, TURN, and ICE. • Block—Select the Web features that you wish to restr

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Viewing Status Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 152 5 • Force Version—The default protocol version to use. Select Normal (uses RSTP) or Compatible (compatible with old STP). The default is Normal. • Protocol Enable—Check this box to enable RSTP on the associated port. The default is unchecked (RSTP disabled). • Edge—Check this box to specify that the associated port is an edge p

• Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring the VPN Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 107 5 - Tunnel Test—Click Connect to verify the tunnel status; the test result is updated in the Status column. If the tunnel is connected, you can disconnect the IPSec VPN connection by clicking D

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring the Administration Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 128 5 - Denial of Service Thresholds—Enter the number of DoS attacks that need to be detected (and blocked) by the software firewall before an e- mail alert is sent. The minimum value is 20, the maximum value is 100. Note that if IPS has been enabled, IPS blocks DoS attacks before they reach the firewall. In that case, check the IPS Report to see event details. - Log Queue Length—The default is 50 entries (the router mails the log if there are

• Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router, Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring Wireless Settings Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 70 5 - Disabled—To disable wireless connectivity completely. This might be useful during system maintenance. • Wireless Channel—Select the appropriate channel to be used between your wireless router and your client devices. The default is channel 6. You can also select Auto so that your router selects the channel with the lowest amount of wireless interference while th

More Instructions:

	Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Operation & user’s manual 08-02-2023 180	DOWNLOAD
	Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Quick start manual 31-12-2022 2	DOWNLOAD

Related Products and Documents (Wireless Router):

Comparable Devices:

Similar Resources:

• Nokia 7705 (134 pages) Nokia — Proprietary and confidential.Use pursuant to applicable agreements. 7705 SAR-Hm7705 SAR-Hmc | Release 20.5.R1Interface Configuration Guide3HE 16178 AAAB TQZZAEdition: 01May 2020Interface Configuration Guide …

• Zte MF60 (48 pages) Confidential and Proprietary Information of ZTE CORPORATION 1 ZTE MF60 3G Global Mobile Hotspot User Manual ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: (86) 755 26779999 URL: http://www.zte.com.cn E-mail: [email protected] …

• Linksys BEFSR41W (2 pages) diskontcomputer.comFirma Matzner MichaelWiener Bundesstraße 384061 Pasching, Austria:: Seite 1 von 2 :: Datenblatt zum Produkt Linksys ETHERFAST CABLE/DSL ROUTER mit DC# 120525 ::Fragen zu dem Produkt Linksys ETHERFAST CABLE/DSL ROUTER? Kein Problem - wir helfen Ihnen per eMail ([email protected]) gerne weiter!Den aktuellen Preis und Lagerstand find …

• D-Link DI-604 - Express ENwork Router (12 pages) Before You Begin 1. If you purchased this router to share your high-speed Internet connection with other computers, you must have either an Ethernet-based Cable or a DSL modem with an established Internet account from an Internet Service Provider (ISP). 2. It’s best to use the same computer that is connected to your modem for configuring the …

• HP LaserJet Pro M1212nf - Multifunction Printer (24 pages) HEPTGuia de instalaçãoESGuía de instalaciónFRGuide d'installationENInstallation GuideESLea esto primerowww.hp.com/support/ljm1210seriesLASERJET PROFESSIONAL M1210 MFP SERIES SERIE MFP …

• Tenda W268R (100 pages) 11N Wireless Broadband Router User Guide 1 Wireless-N Broadband Router W268R Notice RF Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. …

Comments, Questions and Opinions: