Cisco 6400 Installation Manual

Text of Cisco 6400 User Guide:

• Cisco 6400, 1-3 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 1 Overview IP Camera Physical Details Back View Figure 1-2 and the table that follows describe the back view of the 6400 IP camera. Figure 1-2 Back View of IP Camera 1 Single reflector illuminator LEDs (SRLEDs) IR LEDs that enhance the video image when the IP camera is running in night mode. 2 Vari f o c al le n s IP camera lens that changes focus as the focal length changes. 3 Light sensor Senses the level of ambient light to determine when to switch day/night mode. 1 General Purpose I/O (GPIO

• Cisco 6400, Index IN-2 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 M motion detection accessing controls 4-7 enabling 4-8 sensitivity 4-8 threshold 4-8 Motion detection controls 4-8 P panning 4-7 password requirements for 3-2 power powering off the IP camera 4-4 powering on the IP camera 4-4 Power over Ethernet (PoE) 2-1 power adapter supported 2-1 Power over Ethernet (PoE) 2-1 R rebooting, IP camera 4-5 Refresh link 4-1 reset factory default values 4-5 reboot 4-5 S saturation 4-6 sensitivity, for motion detection 4-8 Setup window description 4-2 displaying 4-2

• Cisco 6400, IN-1 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 INDEX A About link 4-2 ActiveX controls 4-2 B brightness 4-6 C camera See IP camera Camera Video & Control window accessing 4-5 description 4-2 displaying 4-2 connecting, to the IP camera for the first time 3-1 PC requirements for 3-1 contrast 4-6 D DHCP, obtaining IP address through 3-1 F factory reset 4-5 H help, for IP camera windows 4-2 Home window description 4-2 displaying 4-1 HTTP allowing access through 3-2 I installing IP camera 2-1 IP address default for IP camera 3-1 obtain

• Cisco 6400, 3-2 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 3 Performing the Initial Setup of the IP Camera Step 3 In the Password and Confirm Password fields of the admin row, enter a password for the IP camera administrator. You must enter the same password in both fields. The password is case sensitive and must contain at least eight characters, which can be letters, numbers, and special characters, but no spaces. Special characters are: ! " # $ % & ' ( ) * + , - . : ; < = > ? @ [ \ ] ^ _ ` { | } ~. Step 4 In the Password and Confirm Password fields of the Root row, enter a password that is u

• Cisco 6400, 2-9 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 2 Camera Installation Installing the Sun Shield Step 7 Push the RJ45 plug into the housing (D) and tighten the sealing nut. Step 8 Attach the gasket to the front surface of the housing (D). Step 9 Connect the Ethernet cable to the RJ45 jack and tighten the waterproof connector. Installing the Sun Shield To install the sun shield, perform the following steps. Procedure Step 1 Attach the two included standoff screws to the top of t

• Cisco 6400, CHAPTER 3-1 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 3 Performing the Initial Setup of the IP Camera After you install IP camera as described in the Chapter 2, “Camera Installation,” or after you perform a factory reset procedure, you must access the IP camera and make initial configuration settings. These settings include administrator and root passwords, and whether the IP camera can be accessed through an HTTP connection in addition to the default HTTPS (HTTP secure) connection. To make these configuration settings, you connect to the IP

• Cisco 6400, CHAPTER 2-1 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 2 Camera Installation This chapter provides information and instructions for installing the Cisco Video Surveillance 6400 IP Camera, and includes the following topics: • Installation Guidelines, page 2-1 • Warnings Before Installation, page 2-2 • Installing the IP Camera, page 2-3 • Connecting External Power and I/O Cables, page 2-5 • Connecting a Waterproof Ethernet Cable, page 2-8 • Installing the Sun Shield, page 2-9 Installation Guidelines This section describes how to install the IP camera.

• 4-6 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 4 Camera Management Viewing Live Video Video Resolution drop-down list Choose the resolution for video transmission. The resolutions in this drop-down list depend on the video standard that you selected. The default value for H.264 is 1920 x 1080. The default value fo

• Cisco 6400, 4-9 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 4 Camera Management Viewing Live Video Restore button Deselects all areas in the video field that you have selected for motion detection monitoring. Save Settings button Save the current motion detection configuration. Table 4-4 Camera Video & Control Window Controls (continued) Control Description

• Cisco 6400, 4-8 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 4 Camera Management Viewing Live Video Motion detection controls Note These controls appear when you click the Up Arrow in the Motion Detection area and are available only viewing the primary (H.264) stream. Enable Motion Detection check box Enables the motion detection feature and displays a grid over the video image. When motion detection is enabled, the IP camera monitors activity in the video field areas that you specify. If activity at a defined level occurs in any of these areas, the IP camera genera

• Cisco 6400, 4-2 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 4 Camera Management Understanding the IP Camera User Interface IP Camera Windows The IP camera user interface includes these main windows: • Home window—Displays the system information that is described in Table 4-2. • Setup window—Provides access to the IP camera configuration windows. • Camera Video & Control window—Displays live video from the camera and lets you control a variety of camera and display functions. View Video Displays the Camera Video & Control window. You may be promp

• Cisco 6400, THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS RE

• Cisco 6400, 4-7 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 4 Camera Management Viewing Live Video Image tools Hotspot Zoom button Click this latch button to enables the digital zoom feature, which provides five-step digital zooming in for the normal (not full screen) video display. Click this button again to disable the digital zoom feature. To perform a digital zoom, engage the Hotspot Zoom button and click the video display. The first five clicks zoom the display. The sixth click returns to unzoomed display. Hotspot Pan/Tilt button Click this latch button to enable

• Cisco 6400, 1-2 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 1 Overview Package Contents Package Contents The Cisco Video Surveillance 6400 IP Camera package includes the following items: • Cisco Video Surveillance 6400 IP camera (1) • Mounting plate alignment sticker (1) • Wall mount bracket with mounting plate (1) • Waterproof connector assembly for RJ45 Ethernet enclosure (1) • Waterproof connector assembly for power and I/O cables (1) • Sun shield(1) • Standof

• 4-4 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 4 Camera Management Adjusting the IP Camera Focus and Zoom Adjusting the IP Camera Focus and Zoom To adjust the IP camera focus and zoom, perform the following steps while viewing video from the camera. For information about viewing video, see “Viewing Live Video” section on page 4-5. Procedure Step

• Cisco 6400, 2-5 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 2 Camera Installation Connecting External Power and I/O Cables Connecting External Power and I/O Cables The 6400 IP camera can be powered using Power over Ethernet (PoE), or by using an external power source. If an external power source is used, a power cable must be connected to the General Purpose I/O (GPIO) terminal block on the IP camera. Additionally, external devices that trigger alarms or respond to alarms can be connected to the GPIO terminal block

• Cisco 6400, 4-3 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 4 Camera Management Understanding the IP Camera User Interface Ta b l e 4-2 Home Window Information Field Description General Information ID Identifier of the IP camera. Name Name of the IP camera. Current Time Current date and time of the IP camera. S/N Serial number of the IP camera. Firmware Version of the firmware that is installed on the IP camera. Codec Version of the codec that is running on the IP camera. Part Number Cisco manufacturing part number of the IP camera. Top Assembly Revision

• 2-4 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 2 Camera Installation Installing the IP Camera Step 12 (Optional) If the camera is being install in an area of high humidity, remove the back cover from the camera, place the included silica gel packet in the camera, and then replace the back cover onto the camera. Figure 2-1 IP Camera Installation Steps W

• Cisco 6400, 2-7 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 2 Camera Installation Connecting External Power and I/O Cables Step 6 Secure the sealing nut (E) tightly. Step 7 Connect the external power and I/O cables to the GPIO terminal block. The pin locations and descriptions are as follows: Step 8 Replace the back cover back onto the camera. Pin Description 112 VDC- 212 VDC+ 324 VAC 424 VAC 5DI- 6DI+ 7DO- 8DO+ (E) 87654321

• Cisco 6400, 2-10 Cisco Video Surveillance 6400 IP Camera Installation Guide OL-28494-01 Chapter 2 Camera Installation Installing the Sun Shield Step 2 Place the sun shield on top of the two standoff screws and slide it backward or forward to the desired position. Ensure that the holes in the top of the standoff screws are visible through the holes in the sun shield. Step 3 Use the two included screws to secure the sun shield to the two standoff screws.

More Instructions:

	Cisco 6400 Datasheet 21-06-2023 8	DOWNLOAD
	Cisco 6400 Maintaining 17-08-2023 52	DOWNLOAD

Related Products and Documents (Security Camera):

Comparable Devices:

Similar Resources:

• Canon VB-C300 (3 pages) VB-C300 Network Camera 2/5/2008 Architect & Engineer Specification www.canondv.com/nvs (800) OK-CANON Bid Spec 1.0 Description Network camera should be of Pan/Tilt/Zoom type. The network camera shall have an ultra wide-angle lens. It shall be Power over Ethernet. Lens should have auto focus with entire image in focus. The network camera should be …

• Vivotek Supreme MD8564-EH (4 pages) MD8564-EHQuick Installation GuideWarning Before Installation / Warnung vor der Installation / Waarschuwing voor installatie Refer to your user’s manual for the operating temperature.Hinweise zur Betriebstemperatur siehe Benutzeranleitung.Zie de gebruikershandleiding voor informatie over de gebruikstemperatuur.Power off the Network Camera as soon as smok …

• COP-USA CD260X-WDR (1 pages) COLOR CCD Wide Dynamic High Resolution Color Camera ITEM NO.: CD260X-WDRMenu and Operation Press the “menu” button, then press “enter” for menu control options Under main menu mode, select ĀХ” or ĀЦ”.for sub-menu options. Select ĀЧ” or ĀШ” for submenu mode selection. The blinking cursor will indicate that this categ …

• Sony SNC-CH140 (2 pages) Fixed Network HD CameraSNC-CH140Vision with Precision for HD SecuritySony introduces the powerful addition to its network HD camera lineup, the SNC-CH140.This dual-stream network HD camera, supporting H.264, MPEG-4, and JPEG compression formats, deliver excellent picture quality in HD 720p resolution at 30 frames per second (fps).Incorporating the new “Exm …

• Sony XYSD723IR (25 pages) IR PTZ DOME CAMERAUser Manual※ Read this manual before using the camerasafety announcements1.Careful transportationTransport, storage and installation process, we need to prevent stress, severe vibration and damage to the productimmersion.2. Be careful installation of dome camera modulesTo be especially careful, light up-light down, do not force squeezing …

• Mania NIGHTOWL (9 pages) INSTRUCTION MANUAL WI-FI SECURITY CAMERA NIGHTOWL COMPONENTS • IP Camera • Power adapter • Wi-Fi antenna 5 dBi • Set of mounting screws • Screwdriver • Foam base • User manual TECHNICAL SPECIFICATIONS • Image sensor: 2.0M HD CMOS • Lens: 3.6mm • Min. illumination: 0.5 Lux (colour mode), 0.1 Lux (black & white mode) • …

Comments, Questions and Opinions: